Heating | Smart Thermostats
Coleraine - BT52
Enquiry from: Jenny W
Start Date: Immediate
Need advice on a thermostat and fitting of it
Controlling the way your property is heated is among the better ways to lower costly energy bills and leave you with a lot more disposable earnings at the end of every month. After all, 60% of your power bill is from heating your home, so it's certainly a great place to begin.
With the proper controls you'll have the ability to keep your house at a comfortable temperature, while simultaneously not totally wasting excess money on fuel. You'll likewise be able to keep your house carbon dioxide emissions down also.
The good thing is, heating control systems can be used with just about any boiler, regardless of the type or even age. This suggests there's a saving to make should you just go out there and get it.
By putting in a heating management system you can save in between £70 and £150 annually. Moreover there are plenty of CO2 emissions to be decreased too and you may cut between 310kg and 630kg annually.
Also look at the temperature you have your thermostat set on. By just switching it down only one degree, you can save as much as £75 a year and won't feel a difference in temperature either.
The typical cost of Heating control system is £300. Costs differ based upon the materials and the tradesman selected. The upper price range can be as high as £345. The material costs are normally about £75
Avg. price low | Avg. price low |
---|---|
Avg. price | Avg. price |
Avg. price high | Avg. price high |
£500
£375
£250
£125
£0
Labour cost | £210 | |
Material cost | £75 | |
Waste removal | £15 |
Requests for quotations in Coleraine in October 2024
Requests for Heating control system quotations in Coleraine in October 2024. 0% change from September 2024.
Requests for Heating control system quotations in County Londonderry in October 2024. 0% change from September 2024.
We recorded 730 requests for household improvement quotations in Coleraine. Of such price requests the number of heating control systems was 0. Quotatis was able to match up these clients with as many as four ideal experts who had been readily available for work within Coleraine during those times.
Source: Numbers calculated based on the search volumes in major search enginesColeraine is actually a big town and civil parish near the mouth of the River Bann inside County Londonderry, Northern Ireland. It is northwest of Belfast as well as east of Derry, both of which are joined by key roads and train connections. There's the City of Derry Airport towards the west and Belfast International Airport towards the south-east, both of which are somewhat accessible from Coleraine.
Coleraine - BT52
Enquiry from: Jenny W
Start Date: Immediate
Need advice on a thermostat and fitting of it
Coleraine - BT52
Enquiry from: Keith L
Start Date: Immediate
Install Hive Active heating thermostat and controller
Coleraine - BT51
Enquiry from: Beverley F
Start Date: Immediate
need advice is we can fit nest 3 thermostat to our heating system are you the property owner: owner of the property
Coleraine - BT51
Enquiry from: John P
Start Date: 1 to 3 months
Are you the property owner: Owner of the property Current Boiler: Oil Age of boiler: 10 years + Interested in Heating Control System: Yes Would you consider an easy payment plan: No Do you have a...
Coleraine - BT51
Enquiry from: George M
Start Date: Immediate
Are you the property owner: Owner of the property Property Type: Detached How old is your current boiler: 10 years + How old is your property: 25-50 years Interested in Heating Control System: Yes...
Coleraine - BT51
Enquiry from: Drew C
Start Date: 3+ months
Are you the property owner: Owner of the property Current Boiler: Oil Age of boiler: 10 years + Interested in Heating Control System: Yes Please call to appoint
Coleraine - BT52
Enquiry from: Drew H
Start Date: Immediate
Are you the property owner: Owner of the property New Boiler Type: Gas Age of boiler: 10 years + Interested in Heating Control System: Yes How old is your property: 0-25 years Other Forms: 336, 59 Ag...
Coleraine - BT52
Enquiry from: Ray C
Start Date: Immediate
Are you the property owner: Owner of the property Current Boiler Type: Oil Age of boiler: 10 years + Interested in Heating Control System: Yes How old is your property: 25-50 years Other Forms:...
Limavady - BT49
Enquiry from: Seamus M
Start Date: Immediate
we would like our hive heating system installed. are you the property owner: owner of the property age of boiler: 0-5 years is your boiler: oil house type: semi detached how many bedrooms do you have:...
Ballymoney - BT53
Enquiry from: Edward M
Start Date: 3+ months
Are you the property owner: Owner of the property Current Boiler: Oil Age of boiler: 10 years + Interested in Heating Control System: Yes Would you consider an easy payment plan: Yes Do you hav...
Limavady - BT49
Enquiry from: John B
Start Date: Immediate
Are you the property owner: Owner of the property New Boiler Type: LPG Age of boiler: 10 years + Interested in Heating Control System: Yes How old is your property: 0-25 years Other Forms: 336, 373, ...
Limavady - BT49
Enquiry from: Kirsty H
Start Date: Immediate
Are you the property owner: Owner of the property Property Type: Terrace Interested in Boiler Replace Quotes: No Is your boiler: Gas Interested in Heating Control System: Yes Time scale: Immediate Ot...
Portrush - BT56
Enquiry from: David C
Start Date: Immediate
Are you the property owner: Owner of the property Current Boiler: Oil Age of boiler: 10 years + Interested in Heating Control System: Yes Would you consider an easy payment plan: No Time scale: 1...
Portrush - BT56
Enquiry from: David C
Start Date: Immediate
Are you the property owner: Owner of the property New Boiler Type: LPG Age of boiler: 10 years + Interested in Heating Control System: Yes How old is your property: 25-50 years Please contact to ...
Bushmills - BT57
Enquiry from: David L
Start Date: Immediate
Are you the property owner: Tenant (with permission) New Boiler Type: Oil Age of boiler: 10 years + Interested in Heating Control System: Yes How old is your property: 0-25 years Other Forms: None
Limavady - BT49
Enquiry from: Mark B
Start Date: Immediate
Are you the property owner: Trustee of club Property Type: Commercial Interested in Boiler Replace Quotes: No Is your boiler: Oil Interested in Heating Control System: Yes Payment through club T...
Answer a few quick questions, so we can match you with professionals who can help.
Get free, no-obligation quotes from 4 verified Heating Engineers working in Coleraine.
Compare customer reviews, services and prices, and choose the right professional for you.
Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.
Good easy way to find a selection of trades you need all in one place.
Love LeadsDoWork it's a big part of my Business I would recommend to anyone
Smart controls such as Hive are the next generation technology with more and more people now converting their houses into smart homes to control multiple devices in the homes remotely. Smart technology can be incorporated with several household devices such as security, lighting, entertainment and more. But what if there’s an oil boiler installed in your home, can you still connect your Hive with the your heating? Well, simply read on to find out.
The answer to this question is yes, most oil boilers are compatible with Hive and can substitute for either an existing conventional programmer or thermostat. The smart technology works to help derive more benefits from your heating system and they usually come with apps which can be used to control your home’s heating from anywhere with just your mobile device. Hive, however, cannot work to replace the functions of smart oil boiler heating controls to modulate your heating as they only work on an on or off basis. To make use of the modulating technology in an oil boiler, the cost of manufacture would be considerably higher while offering little advantage in efficiency for the home or property owner. Ultimately, this implies that you can’t incorporate smart technology to control the output in a similar way as a gas boiler, but there are still some ways to utilize smart technology with your oil boiler in such a way to boost your efficiency and lessen the energy bills.
Do you want to use your Hive with your home’s oil boiler? We’d advise you get in touch with an OFTEC qualified engineer if you wish to install Hive Active Heating on your oil boiler, as British Gas engineer do not offer this service.
Installing your Nest thermostat may not be as easy as screwing a light bulb, but we can also assure you that it isn’t very difficult either. However, if you lack the needed training or experience to pull it off, we’d recommend you hire the services of a professional in order to save yourself some time and money. This guide will give you some quick and easy steps to follow and ensure you make no errors during the installation process.
Once installed removing the Nest Thermostat can be done. To get started, you’ll need just a Philips head screwdriver which Nest has thoughtfully provided with the device.
• Turn off the Nest Thermostat by switching the circuit breaker to the off position.
• Label or mark your old thermostat’s wires. However, if you notice your thermostat is tagged 120v or 240v, or possesses thick wires, do not connect the wires to the Nest as you have a high voltage system.
• Uninstall the old thermostat by locating detaching the wires coming out from the wall into the thermostat. Once done, simply unscrew the device from the wall
• Mark the spot of your thermostat. Do this by threading wires through the Nest base plate’s centre incorporate the tiny bubble level. Once done, you can then use a pencil to mark te two screw holes.
• Attach the trim plate. If you wish to cover the screw holes, simply install the trim plate in the Nest box’s bottom to the base plate.
• Using the screws and screwdriver, attach the Nest base to the wall.
• Connect the wires to the Nest by putting the labelled wires in the Nest’s corresponding ports.
• Put the Nest display by lining up the connector on the display’s back.
• Turn on the power by switching the circuit breaker to the on position
• Connect your Nest thermostat to the WiFi network.
• Follow the on-screen guide and set the temperature.
• Use your smartphone or tablet to download the Nest thermostat’s mobile app to monitor and control your device remotely.
If you’re interested in deriving maximum benefits from your central heating system while also being a tech-enthusiast, a smart thermostat is just the perfect option as it allows you to control both your boiler and heating system via your mobile device. It also offers a plethora of features which enables you to heat your home more efficiently while also cutting your energy bills. Here, we’ll be taking a deeper look at the Tado smart thermostat (a user friendly smart thermostat with multiple impressive features such as a great design, self learning and LED interface).
A Tado smart thermostat is a relatively small piece of kit which is perfect for tech-lovers looking to get a first experience of the smart thermostats’ world. Although the appliance might feature just a basic design with a bit less advanced features in comparison with other thermostats like Hive, Nest and more, it however, still comes with some fantastic features which you can’t afford to miss out on. These includes geofencing, Smartphone or tablet control as well as heat scheduling. As you would have expected with any good smart thermostat, the ability to remotely control your heating is a top priority for several smart thermostats’ owners and Tado offers you this and more. Therefore, no more worries during the Winter months and wishing your home should be warm and perfect for your return. Aside this, a Tado smart thermostat also goes a long way to ensure efficient energy use and as a result, reducing the money paid on energy bills.
Overall, Tado is a nicely designed smart thermostat which is relatively easy to use and a perfect option for homeowners interested in having a taste of the world of smart thermostats or looking to replace their existing device.
In recent times, home and property owners are constantly looking for ways in which to enhance both energy efficiency and sustainability especially as the world draws closer and closer to energy-efficient technology. The Nest thermostat is a great example of this fact as its designed in such a way to save energy while also cutting heating and cooling costs. And an interesting fact is, you’re not limited to using just a single Nest thermostat in your home as multiple of the device can successfully run together to maintain a consistent level of temperature monitoring as well as energy efficiency. What’s more? You can add up to 20 Nest thermostat and 18 temperature sensors in a home.
It’s very unlikely that you’re going to need this many thermostats in your home, but if you’d like to add a second the process is quite straightforward. However, we’d recommend you employ the services of a seasoned professional especially if you lack the required training or experience to pull this off to save yourself some time and money.
To get started, simply download the associated Nest app to add Nest devices. Now let’s have a look at the processes involved in adding a second Nest thermostat to your home.
• Open the app.
• Go to the top left corner of the main screen and click on the menu button.
• Pick the location or home you’re adding the device to.
• Go to the top right corner and select the “settings.
• Once done, then click on the Add Product “Plus button.
Upon a successful addition of the second thermostat, the app will guide you through the initial set up steps. Google also offers a very helpful guide if you’re unfamiliar with the initial configuration.
We can help you get more Heating control system work and boost your business.
Join today