Heating | Smart Thermostats
Spennymoor - DL16
Enquiry from: Jeff M
Start Date: Immediate
purchase and install hive system
Managing the way your property is heated is one of the better ways to cut back expensive energy expenses and leave you with far more disposable income at the end of each month. Of course, 60% of your energy bill is from heating the house, so it's definitely an excellent place to begin.
With the proper controls you'll be able to keep your home at a comfy temperature, while all at once not wasting more money on fuel. You'll likewise be able to keep your home co2 emissions down also.
The good news is, heating control systems can be used with just about any boiler, no matter what design or even age. This means there's a saving to be made if you go out there and get it.
By putting in a heating management system you can save between £70 and £150 every year. Besides this there are plenty of CO2 emissions to be lowered also and you'll slash between 310kg and 630kg annually.
Also consider the temperature you have your thermostat set on. By just switching it down just one degree, you can save approximately £75 a year and won't feel a difference in temperature either.
The typical cost of Heating control system is £300. Costs differ based upon the materials and the tradesman selected. The upper price range can be as high as £345. The material costs are normally about £75
Avg. price low | Avg. price low |
---|---|
Avg. price | Avg. price |
Avg. price high | Avg. price high |
£500
£375
£250
£125
£0
Labour cost | £210 | |
Material cost | £75 | |
Waste removal | £15 |
Requests for quotations in County Durham in October 2024
Requests for Heating control system quotations in County Durham in October 2024. 0% change from September 2024.
Requests for Heating control system quotations in Northern Ireland in October 2024. 0% change from September 2024.
We recorded 7,941 requests for property improvement prices in County Durham. Of such quotation requests the amount of heating control systems was 0. Quotatis had been able to match up these consumers with up to four suitable experts who had been available for work in County Durham during that time.
Source: Numbers calculated based on the search volumes in major search enginesSpennymoor - DL16
Enquiry from: Jeff M
Start Date: Immediate
purchase and install hive system
Durham - DH6
Enquiry from: Benjamin O
Start Date: Immediate
check my thermostats, might need replcement are you the property owner: owner of the property age of boiler: 0-5 years is your boiler: gas house type: detached how many bedrooms do you have: 3-4 bedro...
Durham - DH1
Enquiry from: Barbara R
Start Date: Immediate
installation of hive system to a combi boiler to regulate heating remotely in a student property are you the property owner: owner of the property age of boiler: 6-10 years is your boiler: gas house t...
Stanley - DH9
Enquiry from: Jill P
Start Date: Immediate
i would like to have a quote to have a hive heating thermostat supplied and fitted - i have combi boiler are you the property owner: owner of the property age of boiler: 6-10 years is your boiler: ga...
Chester le Street - DH2
Enquiry from: Bill C
Start Date: Immediate
Supply and fit Hive Do I need to leave my controller at my old house?
Ferryhill - DL17
Enquiry from: Lillian E
Start Date: Immediate
moved house so need hive re connected are you the property owner: tenant (with permission) age of boiler: 6-10 years is your boiler: gas house type: terrace how many bedrooms do you have: 1-2 bedrooms...
Bishop Auckland - DL14
Enquiry from: Gavin P
Start Date: Immediate
i am looking to have a hive heating control system. one control zone
Peterlee - SR8
Enquiry from: Jacqueline O
Start Date: Immediate
supply and install nest thermostat to replace old thermostat are you the property owner: owner of the property age of boiler: 0-5 years is your boiler: gas house type: semi detached how many bedrooms ...
Newton Aycliffe - DL5
Enquiry from: Neil R
Start Date: Immediate
fit hive to baxi combined boiler are you the property owner: tenant (with permission) age of boiler: 6-10 years is your boiler: gas house type: terrace how many bedrooms do you have: 1-2 bedrooms plea...
Trimdon Station - TS29
Enquiry from: Liz R
Start Date: Immediate
Low boiler pressure Radiators cold at the top - bleeding has made no difference Only getting boiling water from bathroom sink tap. Kitchen and bath tap provide warm water only. Air locks in pipes ...
Durham - DH7
Enquiry from: Michael G
Start Date: Immediate
Storage heaters not working
Durham - DH1
Enquiry from: John L
Start Date: Immediate
Heating in kitchen failure to generate heat
Seaham - SR7
Enquiry from: Bernard L
Start Date: Immediate
electronic thermostat malfunction Home Owner Supplied and Fitted Call to Appoint
Chester le Street - DH2
Enquiry from: John O
Start Date: Immediate
Timing mechanism not working properly timing comes on in morning but does not connect PM. Are you the property owner: Owner of the property Age of boiler: 10+ Years Is your boiler: Gas House T...
Crook - DL15
Enquiry from: Georgina A
Start Date: Immediate
heating works sometimes also hot water
Spennymoor - DL16
Enquiry from: Rita R
Start Date: Less than one month
Install one additional radiator in the lounge area Are you the property owner: Owner of the property Age of boiler: 6-10 Years Is your boiler: Gas House Type: Terrace How many bedrooms do you have: ...
Spennymoor - DL16
Enquiry from: R
Start Date: Less than one month
Install one new (double) radiator including cost of radiator, pipe fittings and labour. Are you the property owner: Owner of the property Age of boiler: 0-5 Years Is your boiler: Gas House Type: Sem...
Darlington - DL2
Enquiry from: H R
Start Date: Less than one month
Are you the property owner: Owner of the property Current Boiler: Oil Age of boiler: 10 years + Interested in Heating Control System: Yes Would you consider an easy payment plan: Yes Do you have a go...
Durham - DH6
Enquiry from: Edward M
Start Date: 1 to 3 months
Are you the property owner: Owner of the property New Boiler Type: Gas Age of boiler: 10 years + Interested in Heating Control System: Yes How old is your property: 50 years + Other Forms: None
Chester le Street - DH2
Enquiry from: Rachel H
Start Date: Immediate
Are you the property owner: Owner of the property New Boiler Type: Gas Age of boiler: 10 years + Interested in Heating Control System: Yes How old is your property: 25-50 years Other Forms: None
Answer a few quick questions, so we can match you with professionals who can help.
Get free, no-obligation quotes from 4 verified Heating Engineers working in County Durham.
Compare customer reviews, services and prices, and choose the right professional for you.
Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.
Good easy way to find a selection of trades you need all in one place.
Love LeadsDoWork it's a big part of my Business I would recommend to anyone
Installing your Nest thermostat may not be as easy as screwing a light bulb, but we can also assure you that it isn’t very difficult either. However, if you lack the needed training or experience to pull it off, we’d recommend you hire the services of a professional in order to save yourself some time and money. This guide will give you some quick and easy steps to follow and ensure you make no errors during the installation process.
Once installed removing the Nest Thermostat can be done. To get started, you’ll need just a Philips head screwdriver which Nest has thoughtfully provided with the device.
• Turn off the Nest Thermostat by switching the circuit breaker to the off position.
• Label or mark your old thermostat’s wires. However, if you notice your thermostat is tagged 120v or 240v, or possesses thick wires, do not connect the wires to the Nest as you have a high voltage system.
• Uninstall the old thermostat by locating detaching the wires coming out from the wall into the thermostat. Once done, simply unscrew the device from the wall
• Mark the spot of your thermostat. Do this by threading wires through the Nest base plate’s centre incorporate the tiny bubble level. Once done, you can then use a pencil to mark te two screw holes.
• Attach the trim plate. If you wish to cover the screw holes, simply install the trim plate in the Nest box’s bottom to the base plate.
• Using the screws and screwdriver, attach the Nest base to the wall.
• Connect the wires to the Nest by putting the labelled wires in the Nest’s corresponding ports.
• Put the Nest display by lining up the connector on the display’s back.
• Turn on the power by switching the circuit breaker to the on position
• Connect your Nest thermostat to the WiFi network.
• Follow the on-screen guide and set the temperature.
• Use your smartphone or tablet to download the Nest thermostat’s mobile app to monitor and control your device remotely.
The Hive thermostat stand is relatively easy to install, however if you lack the necessary training or experience, this is a task you might want to leave to a professional to guarantee the best result while also saving you money and time. This guide will give you a good insight into the Hive thermostat installation process.
The installation of a Hive thermostat does require it to be connected to your home boiler. For this reason we always recommend you get a professional to install it. However once install the Hive Smart Thermostat is very easy to operate and move the controller around your home. To get started, you can follow these steps:
• Press the lever at the lower side of the thermostat and pull away from the front to detach the back plate of your device.
• Once done, simply hang the thermostat on the stand back plate and ensure it holds firmly in place
When it comes to Hive thermostat installation, you might also want to consider the positioning of the device in such a way to heat your home even more efficiently as its designed to be very sensitive to temperature. To identify the best spot for your Hive thermostat, let’s take a look at some of the dos and don’ts.
A Few Dos:
• Do maintain the position of your Hive Thermostat to keep a stable connection with the receive and Hive Hub.
• Do ensure that the position chosen is the centre of your home or a frequently used room.
• Do place the thermostat about 1 to 1.5 metres from floor.
• Do ensure that your thermostat is in a close proximity with the hub and receiver for a better functionality.
A Few Don’ts:
• Don’t place your Hive thermostat stand close to radiators, direct sunlight or other heat sources,
• Don’t position your device near or at places that can expoerience a sudden change in temperature such as the front or back door.
• Don’t leave your thermostat too close to curtains or ornaments.
The short answer to this is no! Smart thermostats can still be used without WiFi, however, they’ll be deprived of some certain capabilities and innovative features that comes mainly due to their ability to connect to the internet. As a result, the smart thermostat will only be functional for basic task such as heating and cooling control. In other words, making use of a WiFi connection will be in your best bet to enjoy the multiple juicy benefits that comes with a smart thermostats such as remote monitoring, ability to connect to other devices and display local weather conditions and much more. And what’s the use of purchasing a smart thermostat if you’d not be able to enjoy these remarkable features?
However, even when you have a WiFi, it’s expected for the connection to fail at times. When this happens, what will be the impact on your smart thermostat? Let’s have a closer look!
• As you would have expected, when your smart thermostat is disconnected from WiFi, features that are controlled with the mobile app would all be impacted. And this might be a big headache when you wish to access these features and control remotely when far away from home.
• When your smart thermostat connection to WiFi fails, all live updates and alerts would be affected. This implies that you’d stop seeing updates, reports and notifications on your mobile device. As a result, you’ll not be notified in case of an emergency like electricity cut-outs, water leaks, humidity and temperatures exceeding the set levels as well as thermostat’s low battery.
• The lack of a WiFi connection might have taken away all the juicy advantages of having a smart thermostat, but one function that remains unaffected is the basic one - the control of your home’s heating and cooling system. In other words, if your smart thermostat is offline, your home will still be heated and cooled to the thermostat’s set temperature.
In recent times, home and property owners are constantly looking for ways in which to enhance both energy efficiency and sustainability especially as the world draws closer and closer to energy-efficient technology. The Nest thermostat is a great example of this fact as its designed in such a way to save energy while also cutting heating and cooling costs. And an interesting fact is, you’re not limited to using just a single Nest thermostat in your home as multiple of the device can successfully run together to maintain a consistent level of temperature monitoring as well as energy efficiency. What’s more? You can add up to 20 Nest thermostat and 18 temperature sensors in a home.
It’s very unlikely that you’re going to need this many thermostats in your home, but if you’d like to add a second the process is quite straightforward. However, we’d recommend you employ the services of a seasoned professional especially if you lack the required training or experience to pull this off to save yourself some time and money.
To get started, simply download the associated Nest app to add Nest devices. Now let’s have a look at the processes involved in adding a second Nest thermostat to your home.
• Open the app.
• Go to the top left corner of the main screen and click on the menu button.
• Pick the location or home you’re adding the device to.
• Go to the top right corner and select the “settings.
• Once done, then click on the Add Product “Plus button.
Upon a successful addition of the second thermostat, the app will guide you through the initial set up steps. Google also offers a very helpful guide if you’re unfamiliar with the initial configuration.
We can help you get more Heating control system work and boost your business.
Join today