External Painting & Decorating in Romford

How To Prepare Exterior Walls For Painting?

For a great and smooth exterior finish, preparing the walls before painting is crucial. A great painting job melts the heart and even more so if its done by you. This is a relatively easy task that can be completed without much hassle by an expert DIYer. However if you lack the needed confidence to pull off your exterior wall painting preparation task, then hiring the services of a reliable professional who can guarantee the best result would be your best bet. In this step by step, we aim to take you through the steps involved in preparing exterior walls for painting.

Before you get started, you need to make sure you have the necessary tools in place. These includes a filler and filling knife, sandpaper, soap, sponge, wide paint brush, masking tape as well as drop sheets.

✓ Ensure a smooth surface with a filer and sanding. This includes removing and replacing any rotten or decaying timer, proper sanding as needed, scraping off of peeling areas with sanding and filling of cracking areas with the help of exterior grade filler. Once the above is completed, you can then proceed to filling any holes or cracks in your exterior surface with a top quality exterior filler ( the application should be done with a putty knife).

✓ Cleaning. With the help of a quality and soft brush, clear out the dirt and cobwebs on the exterior’s surface. Then wash the walls with a good detergent to remove any remaining dirt and grease. You can use a bristled brush and a high pressure cleaner to make the process easier.

✓ Mask the area. This involves using a top quality masking tape along the edges you do not wish to paint and pushing the tape’s edges down firmly in such a way to get straight edges.

This will depend on your property, but commonly painted areas include rendered walls, guttering, soffits and fascias, and window frames. Generally you can paint what you want but on older or listed buildings, you may be restricted. An experienced painter will tell you what is possible.

How To Remove Flaking Paint From Exterior Walls

For a successful exterior wall painting project, all that’s required is the right painting tools and equipments, the appropriate exterior paint as well as the necessary preparation of the surface. With the later being perhaps the most important part of the project which is likely to take your time and effort as there’s no short cut to it. But once you have a good idea on how to prepare the exterior wall’s surfaces, the painting of the exterior of your house becomes a lot easier. And a good example of this, is the process of removing the flaking paint on the surface. Fortunately, you do not require the skills of an expert to be able to remove the flaking paint from your exterior walls. So let’s take a look at how you can remove flaking paint from your exterior walls with relative ease.

✓ Clear all flaking or peeling paint. This involves scraping the entire painted surface with a scraper to remove all loose paints. For the paints that wouldn’t yield easily, you can apply extra pressure to wipe it out. However, it’s important to be careful while doing this to avoid gouging out or damaging the surface.

✓ Use coarse sandpaper. Make use of a sandpaper to sand all the exterior wall’s surfaces until they’re smooth. When you get to tight spaces and trim, you can incorporate a sanding block to make your job easier and more effective. Note that a smoother surface will make for a better adhesion.

✓ Use an orbital or power sander. If the paint is peeling, you can scrape it off perfectly with the help of a power sander. This will help you in achieving a smooth surface on inaccessible edges and more.

In most areas, you will not need planning permission. However, if the property is listed or in a conservation area, you will need listed building consent or planning permission to paint the exterior. A surveyor or architect's advice will be invaluable as they can help with this process.