Damp Proofing in Worksop
Extensions such as garage conversions will often require additional damp proofing to be added through the conversion, as the existing garage normally has a single skin design for walls and floors, which was not built to conform to building regulations for habitable rooms. This damp proofing should be put into walls and floors. In addition, the roof of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will usually be achieved by using a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be placed down either on top of the existing concrete floor, below the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In a few garages, the walls will have already been damp proofed, but this may need to be updated as part of the conversion to be able to comply with current building regulations. The walls will need to be damp proofed to be able to safeguard the brickwork from rotting gradually as moisture sets in. This can be accomplished by either using damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is a part of the building regulations that the garage conversion should comply with, therefore is it important to ensure that your garage conversion employs appropriate damp proofing methods.