Damp Proofing in Tonypandy
Extensions including garage conversions will typically require supplementary damp proofing to be installed through the conversion, as the pre-existing garage typically has a single skin design for walls and floors, which was not designed to comply with building regulations for habitable rooms. This damp proofing should be added to walls and floors. Furthermore, the roof of the garage conversion will need water proofing. The damp proofing for the floor of the garage conversion will most likely be achieved by employing a damp proof membrane. This membrane can come in either solid or liquid form. The damp proof membrane will be placed down either on top of the existing concrete floor, below the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In some garages, the walls will have already been damp proofed, but this may have to be improved as part of the conversion to be able to comply with current building regulations. The walls should be damp proofed to be able to protect the brickwork from rotting slowly as moisture sets in. This is done by either employing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is an integral part of the building regulations that the garage conversion will need to comply with, therefore is it necessary to ensure that your garage conversion incorporates suitable damp proofing methods.
