Damp Proofing in Stirling
Extensions including garage conversions will often require extra damp proofing to be installed during the conversion, as the existing garage normally has a single skin design for walls and floors, which was not designed to comply with building regulations for habitable rooms. This damp proofing will have to be added to walls and floors. In addition, the roof of the garage conversion will require water proofing. The damp proofing of the floor of the garage conversion will in most cases be performed by by using a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be put down either on top of the existing concrete floor, underneath the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In some garages, the walls have already been damp proofed, but this might have to be updated as part of the conversion in order to adhere to current building regulations. The walls will need to be damp proofed to be able to protect the brickwork from rotting slowly as moisture sets in. This is performed by either implementing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already in the garage. Damp proofing is a part of the building regulations that the garage conversion should adhere to, and so is it vital to ensure that your garage conversion employs appropriate damp proofing methods.
