Damp Proofing in Shrewsbury
Extensions such as garage conversions will typically require supplementary damp proofing to be installed during the conversion, as the pre-existing garage typically has a single skin design for walls and floors, which was not built to comply with building regulations for habitable rooms. This damp proofing will have to be put into walls and floors. Moreover, the roofing of the garage conversion will require water proofing. The damp proofing of the floor of the garage conversion will in most cases be achieved by utilising a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be put down either on top of the pre-existing concrete floor, underneath the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In some garages, the walls will have already been damp proofed, but this may have to be updated as part of the conversion to be able to comply with current building regulations. The walls will need to be damp proofed to be able to protect the brickwork from rotting slowly as moisture sets in. This can be done by either implementing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already present in the garage. Damp proofing is an important part of the building regulations that the garage conversion should adhere to, therefore is it important to make sure that your garage conversion employs suitable damp proofing methods.