Damp Proofing in Oldham
Extensions such as garage conversions will often require supplementary damp proofing to be added through the conversion, as the pre-existing garage normally has a single skin design for walls and floors, which was not manufactured to comply with building regulations for habitable rooms. This damp proofing should be added to walls and floors. Moreover, the roof of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will in most cases be performed by using a damp proof membrane. This membrane can come in either solid or liquid form. The damp proof membrane will be put down either on top of the pre-existing concrete floor, below the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In some garages, the walls have already been damp proofed, but this might have to be improved as part of the conversion to be able to adhere to current building regulations. The walls should be damp proofed to be able to protect the brickwork from rotting slowly as moisture sets in. This can be accomplished by either using damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is an important part of the building regulations that the garage conversion should adhere to, therefore is it necessary to ensure that your garage conversion makes use of suitable damp proofing methods.
