Damp Proofing in Livingston
Extensions such as garage conversions will usually require extra damp proofing to be added through the conversion, as the existing garage normally has a single skin design for walls and floors, which was not manufactured to conform to building regulations for habitable rooms. This damp proofing should be added to walls and floors. Furthermore, the roof of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will usually be achieved by utilising a damp proof membrane. This membrane can come in either solid or liquid form. The damp proof membrane will be placed down either on top of the existing concrete floor, below the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In some garages, the walls have already been damp proofed, but this might need to be updated as part of the conversion in order to adhere to current building regulations. The walls should be damp proofed to be able to safeguard the brickwork from rotting gradually as moisture sets in. This can be accomplished by either implementing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already present in the garage. Damp proofing is an important part of the building regulations that the garage conversion will need to comply with, therefore is it important to ensure that your garage conversion makes use of suitable damp proofing methods.
