Damp Proofing in Kingussie
Extensions such as garage conversions will typically require supplementary damp proofing to be added during the conversion, as the pre-existing garage will often have a single skin design for walls and floors, which was not manufactured to comply with building regulations for habitable rooms. This damp proofing should be put into walls and floors. Additionally, the roof of the garage conversion will need water proofing. The damp proofing of the floor of the garage conversion will in most cases be performed by employing a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be put down either on top of the existing concrete floor, underneath the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In a few garages, the walls have already been damp proofed, but this might need to be updated as part of the conversion to be able to comply with current building regulations. The walls will need to be damp proofed to be able to protect the brickwork from rotting gradually as moisture sets in. This can be accomplished by either employing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already present in the garage. Damp proofing is an integral part of the building regulations that the garage conversion will need to adhere to, and so is it important to make sure that your garage conversion incorporates appropriate damp proofing methods.