Damp Proofing in Forres
Extensions including garage conversions will typically require supplementary damp proofing to be added as part of conversion, as the existing garage typically has a single skin design for walls and floors, which was not manufactured to comply with building regulations for habitable rooms. This damp proofing will need to be put into walls and floors. Additionally, the roof of the garage conversion will require water proofing. The damp proofing of the floor of the garage conversion will in most cases be achieved by utilising a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be placed down either on top of the existing concrete floor, underneath the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In a few garages, the walls will have already been damp proofed, but this might have to be improved as part of the conversion in order to comply with current building regulations. The walls should be damp proofed in order to safeguard the brickwork from rotting slowly as moisture sets in. This is accomplished by either using damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already in the garage. Damp proofing is an important part of the building regulations that the garage conversion will need to adhere to, and so is it necessary to make sure that your garage conversion makes use of appropriate damp proofing methods.