Damp Proofing in Elgin
Extensions such as garage conversions will usually require additional damp proofing to be added through the conversion, as the pre-existing garage will typically have a single skin design for walls and floors, which was not manufactured to be in accordance with building regulations for habitable rooms. This damp proofing should be added to walls and floors. Furthermore, the roofing of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will usually be performed by using a damp proof membrane. This membrane can come in either solid or liquid form. The damp proof membrane will be placed down either on top of the pre-existing concrete floor, underneath the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In some garages, the walls will have already been damp proofed, but this may have to be improved as part of the conversion in order to comply with current building regulations. The walls should be damp proofed in order to protect the brickwork from rotting slowly as moisture sets in. This is accomplished by either using damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is a part of the building regulations that the garage conversion will need to adhere to, therefore is it necessary to ensure that your garage conversion makes use of suitable damp proofing methods.