Damp Proofing in Glossop
Extensions including garage conversions will often require additional damp proofing to be added through the conversion, as the existing garage will typically have a single skin design for walls and floors, which was not designed to comply with building regulations for habitable rooms. This damp proofing should be added to walls and floors. In addition, the roofing of the garage conversion will need water proofing. The damp proofing for the floor of the garage conversion will usually be performed by employing a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be put down either on top of the pre-existing concrete floor, underneath the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In a few garages, the walls will have already been damp proofed, but this may need to be updated as part of the conversion to be able to meet current building regulations. The walls should be damp proofed to be able to protect the brickwork from rotting slowly as moisture sets in. This is accomplished by either making use of damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already in the garage. Damp proofing is an important part of the building regulations that the garage conversion should comply with, therefore is it necessary to make sure that your garage conversion makes use of appropriate damp proofing methods.