Damp Proofing in Dymock
Extensions including garage conversions will often require extra damp proofing to be installed during the conversion, as the existing garage normally has a single skin design for walls and floors, which was not manufactured to comply with building regulations for habitable rooms. This damp proofing should be put into walls and floors. In addition, the roofing of the garage conversion will need water proofing. The damp proofing for the floor of the garage conversion will most likely be achieved by utilising a damp proof membrane. This membrane can come in either solid or liquid form. The damp proof membrane will be placed down either on top of the existing concrete floor, below the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In some garages, the walls have been damp proofed, but this may have to be improved as part of the conversion to be able to adhere to current building regulations. The walls should be damp proofed in order to safeguard the brickwork from rotting slowly as moisture sets in. This is accomplished by either making use of damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already present in the garage. Damp proofing is an integral part of the building regulations that the garage conversion will need to adhere to, therefore is it necessary to ensure that your garage conversion employs appropriate damp proofing methods.