Damp Proofing in Cinderford
Extensions including garage conversions will typically require extra damp proofing to be added through the conversion, as the existing garage typically has a single skin design for walls and floors, which was not designed to comply with building regulations for habitable rooms. This damp proofing should be put into walls and floors. Furthermore, the roof of the garage conversion will need water proofing. The damp proofing for the floor of the garage conversion will most likely be achieved by by using a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be placed down either on top of the pre-existing concrete floor, below the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In a few garages, the walls have been damp proofed, but this may have to be improved as part of the conversion in order to comply with current building regulations. The walls will need to be damp proofed in order to safeguard the brickwork from rotting slowly as moisture sets in. This can be carried out by either implementing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is an integral part of the building regulations that the garage conversion should comply with, therefore is it vital to make sure that your garage conversion employs appropriate damp proofing methods.