Damp Proofing in Cheddar
Extensions such as garage conversions will typically require supplementary damp proofing to be added during the conversion, as the pre-existing garage normally has a single skin design for walls and floors, which was not designed to be in accordance with building regulations for habitable rooms. This damp proofing will need to be added to walls and floors. Furthermore, the roofing of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will most likely be performed by employing a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be placed down either on top of the pre-existing concrete floor, underneath the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In some garages, the walls have been damp proofed, but this may need to be improved as part of the conversion to be able to meet current building regulations. The walls will need to be damp proofed to be able to safeguard the brickwork from rotting slowly as moisture sets in. This is carried out by either making use of damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already present in the garage. Damp proofing is an integral part of the building regulations that the garage conversion will need to comply with, therefore is it important to ensure that your garage conversion incorporates suitable damp proofing methods.