Damp Proofing in Arbroath
Extensions such as garage conversions will typically require extra damp proofing to be installed through the conversion, as the existing garage routinely has a single skin design for walls and floors, which was not manufactured to conform to building regulations for habitable rooms. This damp proofing should be added to walls and floors. Moreover, the roofing of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will most likely be performed by employing a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be put down either on top of the existing concrete floor, below the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In some garages, the walls have already been damp proofed, but this may have to be updated as part of the conversion in order to adhere to current building regulations. The walls should be damp proofed to be able to protect the brickwork from rotting slowly as moisture sets in. This can be carried out by either utilising damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already in the garage. Damp proofing is an important part of the building regulations that the garage conversion should adhere to, therefore is it important to make sure that your garage conversion incorporates appropriate damp proofing methods.
