Artex is a product that is used for for decorating surfaces in home interiors. It is usually chosen to apply a textured surface to ceilings. Artex remains in demand instead of smooth plaster ceilings, and an experienced painter and decorator will have the ability to apply artex in many different textured design finishes. Artex describes a particular brand name, but there are alternative manufacturers who produce equivalent materials. Older artex ceilings can be fixed as well, with a selection of materials and applicators available in order to make this procedure as easy as possible. There is a wide variety of different options for the varieties of texture which artex can be applied in. Stipple, swirl, or shell effects can be administered, all of which can be undertaken as a DIY job reasonably easily. Experienced painters and decorators can review with you which impact would best match your area, and guarantee that artex is put on in a quality and consistent surface. Artex can even be painted over, and opting for a shade that enhances the texture of the surface can restore a tired ceiling and breathe life into a space.
How much your artexing project might cost depends on how big the area is, how accessible it is and your location. Different professionals charge different amounts, and may spend varying amounts of time doing the work. However, the typical cost for an artexing project in the UK is about £200.
| Avg. price low | Avg. price low |
|---|---|
| Avg. price | Avg. price |
| Avg. price high | Avg. price high |
£400
£300
£200
£100
£0
| Labour cost | £140 | |
| Material cost | £50 | |
| Waste removal | £10 |
Requests for quotations in Oldham in October 2024
Requests for Artexing quotations in Oldham in October 2024. 0% change from September 2024.
Requests for Artexing quotations in Lancashire in October 2024. 0% change from September 2024.
The large town of Oldham can be located amongst the Pennines inside the Greater Manchester area. Along with several additional small towns, it makes up the Metropolitan Borough of Oldham. Much architecture remains such as the cotton mills and other industrial structures, but Oldham is largely a residential town and hub for education. Make positive changes to property by looking at rates from respected businesses in Oldham.
Oldham - OL4
Enquiry from: Imran M
Start Date: 1 to 3 months
Customer in Oldham area made an enquiry for Artexing online. Confirmed via SMS at 13:22 Confirmed via email at 13:22 Please call to arrange an appointment to discuss options
Oldham - OL4
Enquiry from: Shameem A
Start Date: 1 to 3 months
Customer is looking for Artexing quotes. They are unsure of options so would like to discuss. Confirmed interest via Customer lives in Oldham area Please call to arrange an appointment
Oldham - OL8
Enquiry from: Kelly M
Start Date: Immediate
Customer visited the myplasteringprices.co.uk site and submitted an enquiry. Property type: Terrace, Work description: 2-3 sq meters living
Answer a few quick questions, so we can match you with professionals who can help.
Get free, no-obligation quotes from 4 verified Plasterers working in Oldham.
Compare customer reviews, services and prices, and choose the right professional for you.
Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.
Good easy way to find a selection of trades you need all in one place.
Love LeadsDoWork it's a big part of my Business I would recommend to anyone
It’s possible to paint your artex ceiling if you want to smarten it up or make it a different colour.
If it’s never been painted before, you’ll need to paint it with a PVA-based solution or water-thinned paint layer to start with. You may want to scrape or sand off any loose or peeling patches beforehand, but only do this if you’re sure that the artex doesn’t contain any asbestos.
Once you’ve done this, follow with two coats of your paint of choice – ideally an emulsion. If your artex ceiling has been painted before then you can paint directly without priming. However, if you’re painting over a particularly bold colour with a lighter one, you might want apply a layer of white paint first.
Artexing a ceiling can be a tricky job, but whether you’re considering hiring a professional or DIY, it’s helpful to know how it’s done.
Artex is available either in a paste or powder form. The paste is ideal if you’re making small repairs or additions to an existing ceiling. But, if you have a whole ceiling to cover, the powder is more cost effective. When you’re ready to get started, you’ll need to mix the powder up with cold water according to the instructions.
It’s possible to artex over plaster, plasterboard or paint. If you have a plasterboard surface, you should tape and fill any joints or cracks before you begin. Plaster and plasterboard both require a coat of sealant or primer first. You can usually artex straight over paint, but any gloss paint should be sanded down, and any dark paints covered with a layer of white.
Artexing can get quite messy, so make sure you empty the room you’re working in as much as possible, lay down sheets and wear protective clothing and glasses. You might want to practice on a piece of board before you start on the ceiling.
Start by using a brush or roller to cover a 500 square cm area with a generous layer of artex. Then use a brush, comb or roller to create your chosen texture. Every time you do a new section of ceiling, try to blend it with the other sections you’ve done. Don’t be tempted to cover the whole ceiling before you start adding texture – the artex will dry too quickly for you to do it all in time.
Artex usually needs 12-24 hours in a well-ventilated space to dry completely.
If your artex ceiling is looking tired or you just fancy a change, you can try plastering over your artex. You have two options when it comes to plastering over your artex: plasterboard or skimming.
Covering your ceiling with plasterboard is a good option if you suspect the artex may contain asbestos. If done carefully, it doesn’t involve disturbing the artex, reducing the risk of asbestos exposure.
You also have the option to skim over your ceiling. The first steps to this involve removing loose and flaking parts, cutting off stipples and sanding your ceiling down. So, if there’s a chance your artex ceiling may contain asbestos, this isn’t the right solution for you. However, if you’re sure there’s no asbestos in your ceiling, then sanding down and skimming over your ceiling can be a great way to create an attractive result.
It’s worth noting that both putting up plasterboard and skimming plaster can be difficult jobs. Although possible to DIY, you’re likely to get much better results if you hire a professional.
Artex was originally made using white asbestos to make it stronger. However, this stopped in the mid-1980s, and the use of asbestos was banned in the UK in 1999, due to its extreme health risks. So, any artex you buy today won’t contain asbestos.
If you have an artex ceiling or wall that was created before 1999, it may have asbestos in it. This won’t be a health hazard if you leave it undisturbed, so it’s not necessary to remove it. However, if you want to get rid of or alter your artex ceiling or wall, you must get it tested to check if it has asbestos in or not first. If it does, you’ll need to hire a qualified professional to work on it.
We can help you get more Artexing work and boost your business.
Join today