Artex is a building material that is used for for decorating surfaces within home interiors. It is usually worked with to apply a textured surface to ceilings. Artex continues to be fashionable instead of smooth plaster ceilings, and a qualified painter and decorator will be able to apply artex in various different textured pattern appearances. Artex refers to a specific brand name, but there are various other manufacturers who create comparable products. Older artex ceilings may be repaired as well, with an assortment materials and applicators available for purchase in order to make this process as quick as possible. There exists a wide array of of different alternatives for the varieties of texture that artex may be applied in. Stipple, swirl, or shell effects could be administered, all of which can be completed as a DIY project relatively easily. Specialist painters and decorators can examine with you which impact would complement your space, and ensure that artex is put on to create an excellent quality and consistent texture. Artex can even be painted over, and deciding on a shade which goes well with the texture of the surface can revitalize a tired ceiling and breathe life into a room.
How much your artexing project might cost depends on how big the area is, how accessible it is and your location. Different professionals charge different amounts, and may spend varying amounts of time doing the work. However, the typical cost for an artexing project in the UK is about £200.
| Avg. price low | Avg. price low |
|---|---|
| Avg. price | Avg. price |
| Avg. price high | Avg. price high |
£800
£600
£400
£200
£0
| Labour cost | £140 | |
| Material cost | £50 | |
| Waste removal | £10 |
Requests for quotations in Cleckheaton in January 2025
Requests for Artexing quotations in Cleckheaton in January 2025. 0% change from December 2024.
Requests for Artexing quotations in West Yorkshire in January 2025. 0% change from December 2024.
The town of Cleckheaton is in the Metropolitan borough of Kirklees, inside the English county of West Yorkshire. Traditionally a part of the West Riding of Yorkshire, the town is located south of Bradford, east of Brighouse, west of Batley and southwest of Leeds. It sits at the centre of the Spen Valley, and was a central town in the previous borough of Spenborough. Based on the 2011 Census, the town features a permanent population of about 16622. Cleckheaton features a history as a mill and coal town, an industry which has largely disappeared from the town. Following the location of good quality coal in the north of Spen Valley, industry developed on a rapid scale. The success of the town's industry was additionally stimulated by the arrival of the railway inside the town during the 1840s. This allowed the textile mills, ironworks, chemical factories and collieries to participate in much more successful competition around the country. In addition, the railways enabled the movement of inhabitants to work at the areas. In the beginning of the Last century, several prominent and high priced buildings were constructed, which quickly became clear symbols for the location's wealth. This includes the erection of big chapels, a new grammar school and also a town hall, which was paid for by public subscription. Additional industries also started to grow at this time, with the Lion Confectionery starting to produce 'Midget Gems' in 1903 and Phelon and Moore motorcycle factory opened in 1904. The great fortunes of the town started to dwindle by the 1920s, with the decline in industry seeing the closure of the textile mills, foundries along with other factories. For all of your residence upgrades, be certain that you use trustworthy pros in Cleckheaton to ensure you get the very best quality.
Answer a few quick questions, so we can match you with local plasterers who can help.
Get free, no-obligation local artexing quotes from 4 verified plasterers working in Cleckheaton.
Compare customer reviews, services and prices, and choose the right tradesperson for you.
Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.
Good easy way to find a selection of trades you need all in one place.
Love LeadsDoWork it's a big part of my Business I would recommend to anyone
Artex is a type of interior surface coating, similar to plaster. It’s used to create decorative textured finishes on ceilings and walls, so it takes longer to dry than plaster.
Artex is actually a brand name, but it’s used to refer to similar products made by other manufacturers too. It was particularly popular in the 1970s, but is still used to create attractive wall and ceiling finishes today.
It’s possible to paint your artex ceiling if you want to smarten it up or make it a different colour.
If it’s never been painted before, you’ll need to paint it with a PVA-based solution or water-thinned paint layer to start with. You may want to scrape or sand off any loose or peeling patches beforehand, but only do this if you’re sure that the artex doesn’t contain any asbestos.
Once you’ve done this, follow with two coats of your paint of choice – ideally an emulsion. If your artex ceiling has been painted before then you can paint directly without priming. However, if you’re painting over a particularly bold colour with a lighter one, you might want apply a layer of white paint first.
If your artex ceiling is looking tired or you just fancy a change, you can try plastering over your artex. You have two options when it comes to plastering over your artex: plasterboard or skimming.
Covering your ceiling with plasterboard is a good option if you suspect the artex may contain asbestos. If done carefully, it doesn’t involve disturbing the artex, reducing the risk of asbestos exposure.
You also have the option to skim over your ceiling. The first steps to this involve removing loose and flaking parts, cutting off stipples and sanding your ceiling down. So, if there’s a chance your artex ceiling may contain asbestos, this isn’t the right solution for you. However, if you’re sure there’s no asbestos in your ceiling, then sanding down and skimming over your ceiling can be a great way to create an attractive result.
It’s worth noting that both putting up plasterboard and skimming plaster can be difficult jobs. Although possible to DIY, you’re likely to get much better results if you hire a professional.
Artexing a ceiling can be a tricky job, but whether you’re considering hiring a professional or DIY, it’s helpful to know how it’s done.
Artex is available either in a paste or powder form. The paste is ideal if you’re making small repairs or additions to an existing ceiling. But, if you have a whole ceiling to cover, the powder is more cost effective. When you’re ready to get started, you’ll need to mix the powder up with cold water according to the instructions.
It’s possible to artex over plaster, plasterboard or paint. If you have a plasterboard surface, you should tape and fill any joints or cracks before you begin. Plaster and plasterboard both require a coat of sealant or primer first. You can usually artex straight over paint, but any gloss paint should be sanded down, and any dark paints covered with a layer of white.
Artexing can get quite messy, so make sure you empty the room you’re working in as much as possible, lay down sheets and wear protective clothing and glasses. You might want to practice on a piece of board before you start on the ceiling.
Start by using a brush or roller to cover a 500 square cm area with a generous layer of artex. Then use a brush, comb or roller to create your chosen texture. Every time you do a new section of ceiling, try to blend it with the other sections you’ve done. Don’t be tempted to cover the whole ceiling before you start adding texture – the artex will dry too quickly for you to do it all in time.
Artex usually needs 12-24 hours in a well-ventilated space to dry completely.
We can help you get more artexing work with our qualified job leads and boost your business.
Join today