Wooden Decking in Llanfyllin

Find Wooden Decking Prices in Llanfyllin

Home > Gardening & Landscaping Projects > Wooden decking > Llanfyllin

Wooden Decking in Llanfyllin

Wooden decking is an increasingly common option for creating outdoor seating areas in gardens. Due to the natural beauty of wood, they can be very elegant spaces which you can use year round with the help of external heating and light. Wooden decking is usually installed in locations in front of patio or French doors where they can create a seamless transition between inside and outside spaces. Wooden decking is available in virtually any size or shape to match any area. Curved designs or large areas joined by pathways can create a striking effect. Wooden decking is reasonably easy to install and causes minimal disruption, especially in comparison to alternate options like patio or paving. It can even be installed over the top of an existing patio. It is essential however to be certain that your wooden decking is structurally sound and able to take the load of any furniture or plants that you would like to use on the decking. There is a choice of species of wood that can be used in wooden decking. Often decking is made of hardwood, but there are softwoods available that fulfil the durability specifications. As hardwood decking will require maintenance, which commonly consists of yearly cleaning and staining for weather proofing, composite woods have become more popular for use in wooden decking because they are more robust and require far less maintenance.

Average Wooden decking cost in Llanfyllin

The typical cost of Wooden decking is £1500. Costs can change based upon the materials and the firm hired. The upper price range can be as high as £1725. The material costs are commonly approximately £375

Average price per Wooden decking job in 2024

Avg. price low

Avg. price low
£663

Avg. price

Avg. price
£1,300

Avg. price high

Avg. price high
£1,863

£2000

£1500

£1000

£500

£0

Prices based on actual Wooden decking costs for Llanfyllin, as reported by local LeadsDoWork members.

Wooden decking installation cost in Llanfyllin 2024

Labour cost £1,050
Material cost £375
Waste removal £75
Time frame: 1-4 days

Wooden decking searches in November 2024

Wooden decking Projects in Llanfyllin in October 2024

123

Requests for quotations in Llanfyllin in October 2024

0

Requests for Wooden decking quotations in Llanfyllin in October 2024. 0% change from September 2024.

0

Requests for Wooden decking quotations in Powys in October 2024. 0% change from September 2024.

Source: Numbers calculated based on the search volumes in major search engines

Wooden decking searches in cities and towns near Llanfyllin October 2024

Llanfyllin

Llanfyllin is a little market town, neighborhood and also selecting ward in a sparsely-populated area in Montgomeryshire, Powys, Wales. Llanfyllin's population in 2011 was 1,532, of whom 34.1% could talk Welsh. Llanfyllin means church or parish (llan) of St Myllin ('m' often alters to 'f' in Welsh). The community hinges on the valley of the River Cain near the Berwyn Mountains in Montgomeryshire, 14 miles (23 kilometres) southwest of Oswestry and 15 miles (24 km) from Montgomery. The River Cain is signed up with by the tiny River Abel in Llanfyllin (most likely called after Cain and also Abel in the Bible), and also meanders via the valley, moving into the River Vyrnwy at Llansantffraid. The community lies between Shrewsbury and Bala, for a long period of time the crucial market communities in this field of Wales as well as the Welsh borders. At close-by Bodyddon there is evidence of a very early British settlement. Llanfyllin may be the "Mediolanum amongst the Ordovices" explained in Ptolemy's Location (c.? advertisement 150), although others argue for Meifod or Caersws. The town is understood for its holy well, Fynnon Coed y Llan. The well is dedicated to Saint Myllin, who is understood to have baptised people right here in the sixth century. The parish church is additionally devoted to Saint Myllin. There is a custom that Saint Myllin is the Irish bishop, Saint Mo Ling (additionally called Moling Luachra) (614-- 697). Nonetheless, this doubts. There is no document of Mo Ling travelling to Wales, and also there is a practice that Myllin is buried under the church of Llanfyllin church whereas Mo Ling is thought to have been hidden at his abbey in Ireland.

Looking for Wooden decking in Llanfyllin?

Get free quotes from local carpenters

Get free quotes

How it works

Tell us about your Wooden decking project

Answer a few quick questions, so we can match you with professionals who can help.

Find up to 4 Carpenters in Llanfyllin

Get free, no-obligation quotes from 4 verified Carpenters working in Llanfyllin.

Hire with confidence

Compare customer reviews, services and prices, and choose the right professional for you.

Our reviews

Average

Would highly recommend

Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.

Good easy way to find a selection of…

Good easy way to find a selection of trades you need all in one place.

Love LeadsDoWork it's a big part of my …

Love LeadsDoWork it's a big part of my Business I would recommend to anyone

FAQs

How to make steps for a deck?
Unless you built a ground-level deck, you’re going to need steps to go with it. Check Building Regulations to see if you need to install handrails as well. It’s good practice to:
  • Have a step tread width of 900mm – if you don’t want them that wide, they should be no less than 760mm
  • Add a central step riser to stairs wider than 900mm to prevent them buckling
  • Add a step depth (the vertical distance between each step) of between 150 and 180mm if building your own riser, so the steps are at a comfortable depth
Getting started To build your steps for the deck, you’ll need:
  • Step treads (the actual step themselves)
  • Step risers
  • Coach screws
  • Deck screws
  • Saw
  • Drill
Make the steps for your deck
  1. Make sure the ground where you want to put your steps is level and firm. If it’s not, consider laying concrete or paving slabs to provide a secure surface for your steps to sit so they don’t sink.
  2. Grab some joist off-cuts and cut them to the same width as your step treads. Attach them to the step risers at the top and bottom using countersunk coach screws.
  3. Place the steps against the sub-frame of the deck; if you’ve put slabs down for support, make sure the steps sit in the middle of them. The longest edge of the stair riser should be on the slabs, and the short edge against the deck. Drill pilot holes through the step and sub-frame joist, then screw the step to the sub-frame with more coach screws.
  4. After drilling pilot holes, screw the treads into the risers at each end with deck screws.
  5. If you don’t want gaps between each stair, you can add joist off-cuts or deck boards. Measure the height and depth of the gap, then screw the off-cut or board into the step riser with two screws at each end.
How much decking do I need?
How much decking you need will – of course – depend on how big you plan your deck to be. There is an equation to help you work out how many deck boards you need. It’s a little complicated until you’ve been shown how it works, but once you know how to do it it’s easy to work out how much decking you need for any project. The equation takes into account the recommended 10% wastage and includes the expansion gaps that are required, which is between 5-8mm along the length of the deck boards (EGL, or expansion gap length) and 3mm along the ends of the deck boards (EGW, or expansion gap width) for timber. It also assumes you’re laying your decking horizontally, as if you’re looking for a diagonal or chevron design you’ll need more deck boards. Let’s go through an example, assuming you have a 10m x 6m area that you want to cover with decking made from timber boards that are 2.4m long and 144mm wide. We’ll use the EGL of 5mm and EGW of 3mm.
  1. Calculate the surface area for your decking Multiply the length (L) of your decking area by the width (W): L x W = Decking Surface Area (DSA) in m2 10 x 6 = 60m2
  2. Work out the coverage of your deck boards Add your deck board width (DBW) to the expansion gap length (EGL), then add the deck board length (DBL) to the expansion gap width (EGW). Then multiply these numbers. (DBW + EGL) x (DBL + EGW) = Single Board Coverage (SBC) 0.144m + 0.005m = 0.149m 2.4m + 0.003m = 2.403m 0.149 x 2.403 = 0.358m2
  3. Calculate the number of deck boards you need Multiply the SBC by 1.1 to allow for 10% wastage. Then, divide the DSA by the SBC. DSA / SCB x 1.1 = Total number of boards required 60m2 / 0.358m2 x 1.1 = 184.36 boards – so round up to 185 so you’re not left short.
If that all seems a bit complicated for you, let a professional do the maths – they will be able to give you an idea of how much decking you’ll need in no time.
What should I do if my deck or terrace is slippery?

Usually, slipperiness is caused by algae or dirt on top of the deck or terrace. A full cleaning treatment should restore the natural grip of the wood or stone. If slipperiness is a persistent problem, consider installing grip mats in high traffic areas of the deck.

How to build a deck frame?
Building a simple deck frame, or decking subframe, that you’re laying on level ground is easy if you take time to prepare and get all the things you need. We’ll go through the steps on how to build a deck frame here. Tools and equipment To get building your deck frame, you’ll need:
  • Decking joists
  • Coach screws
  • Coach bolts
  • Combi drill
  • Socket set
  • A saw suitable for your project and the thickness of the timber
  • Pencil
  • Decking preservative
  • Sandpaper or sander
Build your subframe
  1. Measure your deck frame and cut to size if necessary.
  2. Make 2 pencil marks on each end of the frame’s 2 outer joists to mark where the coach screws will go. They need to align with the centre of the adjoining outer joist. Then, use a flat wood drill bit to drill recesses into each mark. Make them the same depth of the screws that your using’s head and wide enough for a ratchet or socket to tighten them.
  3. Using a thinner drill bit, line up the outer joists and drill a pilot hole through the middle of the recess. These pilot holes act as a guide for the screws and stops them from splitting the wood.
  4. Fit the coach screws with either a drill driver or socket and ratchet.
  5. Repeat the process for the inner joists once you’ve assembled the outer frame.
IMPORTANT: While you’re building your deck frame and the decking itself, remember to cover all pilot holes and ends of timber in decking preservative to ensure that your decking remains structurally sound for as long as possible. Though relatively simple, building a deck frame and the decking will take some time. It would be much quicker and easier to get a professional in to do it, who could represent more value for money.
Placholder Image

Other Top Projects in Llanfyllin

Are you a carpenter in Llanfyllin?

We can help you get more Wooden decking work and boost your business.

Join today