Wooden Decking in Halesworth

Request Wooden Decking Prices in Halesworth

Trustpilot 4.5 stars
Home > Gardening & Landscaping Projects > Wooden decking > Halesworth

Wooden Decking in Halesworth

Wooden decking is an increasingly fashionable choice for creating outdoor seating areas in gardens. Because of the natural beauty of wood, they can be very fashionable areas which can be used year round by adding outside heating and light. Wooden decking is frequently fitted in locations in front of patio or French doors where they can create a smooth transition between inside and outside spaces. Wooden decking is available in virtually any size or shape to complement any area. Curved designs or large areas joined by pathways can produce a stunning effect. Wooden decking is fairly quick to install and causes little disruption, particularly in comparison to alternatives like patio or paving. It could even be installed over the top of a pre-existing patio. It is necessary however to be certain that your wooden decking is structurally sound and able to take the weight of any furniture or plants that you would like to use on the decking. There is a array of species of wood that can be used in wooden decking. Generally decking is constructed from hardwood, but there are softwoods available that fulfil the durability requirements. As hardwood decking will demand maintenance, which usually consists of annual cleaning and staining for weather proofing, composite woods are becoming popular for use in wooden decking because they are stronger and require much less maintenance.

Average Wooden decking cost in Halesworth

The typical cost of Wooden decking is £1500. Costs can change based upon the materials and the firm hired. The upper price range can be as high as £1725. The material costs are commonly approximately £375

Average price per Wooden decking job in 2025

Avg. price low

Avg. price low
£1,125
Avg. price

Avg. price
£1,500
Avg. price high

Avg. price high
£1,725

£1900

£1425

£950

£475

£0

Prices based on actual Wooden decking costs for Halesworth, as reported by local LeadsDoWork members.

Wooden decking installation cost in Halesworth 2025

Labour cost £1,050
Material cost £375
Waste removal £75
Time frame: 1-4 days

Wooden decking searches in January 2025

Wooden decking Projects in Halesworth in December 2024

219

Requests for quotations in Halesworth in December 2024

0

Requests for Wooden decking quotations in Halesworth in December 2024. 0% change from November 2024.

0

Requests for Wooden decking quotations in Suffolk in December 2024. 0% change from November 2024.

Source: Numbers calculated based on the search volumes in major search engines

Wooden decking searches in cities and towns near Halesworth December 2024

Wooden decking near you

Halesworth

Halesworth is a little market community, civil parish and also electoral ward in the northeastern corner of Suffolk, England. The populace was gauged at 4,726 in the 2011 Census. It lies 15 miles (24 kilometres) south west of Lowestoft, and also depends on a little tributary of the River Blyth, 9 miles (14 kilometres) upstream from Southwold. The community is served by Halesworth train station on the Ipswich-- Lowestoft East Suffolk Line. Halesworth is twinned with both Bouchain in France and also Eitorf in Germany. A Roman settlement, Halesworth has a medieval church; St Mary's with Victorian enhancements and also a range of residences, from early timber-framed structures to the residues of Victorian success. Previous almshouses used to house the Halesworth & District Museum (open from May to September) yet this has actually now been moved to Halesworth train station. The Community Path stroll offers possibility to uncover the background of Halesworth. Halesworth is mostly centred on a pedestrianised buying street known as the Road. Every year the Thoroughfare organizes a prominent food, drink and also craft reasonable, described the "Thoroughfair", to raise money completely causes. Halesworth is the house to the New Cut Arts Centre, which hosts the acclaimed yearly Halesworth Arts Festival. Halesworth has the largest Millennium Green in the UK with about 44 acres (18 ha) of grazing marsh supplying a place for wildlife close to the town centre. The rivers in this field are house to herons, kingfishers as well as otters. Neighboring villages include Cratfield, Wissett, Chediston, Walpole, Blyford, Linstead Parva, Wenhaston, Thorington, Spexhall and also Bramfield. The village of Holton is 1-mile (1.6 kilometres) away with a huge open space for strolling called Holton Pits.

Looking for Wooden decking in Halesworth?

Get free quotes from local carpenters

Get free quotes

Local & reliable carpenters near me

Tell us about your wooden decking project

Answer a few quick questions, so we can match you with local carpenters who can help.

Find up to 4 carpenters in Halesworth

Get free, no-obligation local wooden decking quotes from 4 verified carpenters working in Halesworth.

Hire with confidence

Compare customer reviews, services and prices, and choose the right tradesperson for you.

Our reviews

Average

Would highly recommend

Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.

Good easy way to find a selection of…

Good easy way to find a selection of trades you need all in one place.

Love LeadsDoWork it's a big part of my …

Love LeadsDoWork it's a big part of my Business I would recommend to anyone

FAQs

How much decking do I need?
How much decking you need will – of course – depend on how big you plan your deck to be. There is an equation to help you work out how many deck boards you need. It’s a little complicated until you’ve been shown how it works, but once you know how to do it it’s easy to work out how much decking you need for any project. The equation takes into account the recommended 10% wastage and includes the expansion gaps that are required, which is between 5-8mm along the length of the deck boards (EGL, or expansion gap length) and 3mm along the ends of the deck boards (EGW, or expansion gap width) for timber. It also assumes you’re laying your decking horizontally, as if you’re looking for a diagonal or chevron design you’ll need more deck boards. Let’s go through an example, assuming you have a 10m x 6m area that you want to cover with decking made from timber boards that are 2.4m long and 144mm wide. We’ll use the EGL of 5mm and EGW of 3mm.
  1. Calculate the surface area for your decking Multiply the length (L) of your decking area by the width (W): L x W = Decking Surface Area (DSA) in m2 10 x 6 = 60m2
  2. Work out the coverage of your deck boards Add your deck board width (DBW) to the expansion gap length (EGL), then add the deck board length (DBL) to the expansion gap width (EGW). Then multiply these numbers. (DBW + EGL) x (DBL + EGW) = Single Board Coverage (SBC) 0.144m + 0.005m = 0.149m 2.4m + 0.003m = 2.403m 0.149 x 2.403 = 0.358m2
  3. Calculate the number of deck boards you need Multiply the SBC by 1.1 to allow for 10% wastage. Then, divide the DSA by the SBC. DSA / SCB x 1.1 = Total number of boards required 60m2 / 0.358m2 x 1.1 = 184.36 boards – so round up to 185 so you’re not left short.
If that all seems a bit complicated for you, let a professional do the maths – they will be able to give you an idea of how much decking you’ll need in no time.
How to build a raised deck?
Building a raised deck will take some time and is trickier than laying standard decking at ground level, but if you want to build decking on a slope or uneven ground it’s the best way to do it. If you do your research and follow instructions, you and a friend or family member can build a raised deck over a few days. Here’s a simplified guide of the steps you’ll need to take. Plan carefully It’s best to plan your raised deck by drawing it to scale on paper before you go and get supplies. This will help avoid wastage and making more cuts to timber than necessary. Prepare the area Prepare the area according to the instructions we give in the FAQ ‘How to lay decking’. However, because you’re building a raised deck, you’ll need to add posts:
  1. Place a post in the corner of the frame you created with the pegs and string. Measure and mark out 100mm from each side.
  2. Dig out this soil to a depth of 700mm (watch out for cables or pipes). You should have a 300 x 300mm hole. Repeat for the other 3 corners.
  3. Using a brick bolster, split a concrete block in two. Put a section of the block in each hole.
  4. Get a length of post longer than you need and place one in each hole. You can cut it down later.
  5. Create props on each post to hold them in place until you’re ready to add a cement mix. Check that they’re level. When you’re happy that they are, secure them in place with a concrete mix, making sure you create a slope in the concrete so that rainwater runs away from each post. When the concrete is set, remove the props.
  6. Create a string line around each corner post and find the centre point between each. Place a timber batten at each point, ensuring that they’re not spaced any more than 1500mm apart.
Make the outer frame
  1. Working from the corner where the deck will be at its highest above ground level, measure and mark on the post where the highest part of the frame will be.
  2. Measure from the far side of one post to the opposite and cut sections of joist to size. Line up a piece of joist with the mark you made and temporarily secure it. Factor in a 2mm fall for every metre of decking so rainwater can run off.
  3. Secure the frame to the other corner post, ensuring it’s at the right level. Do this for every side of the outer frame.
  4. Using 100mm coach screws with washers hanging on the end, secure each end of the four sections of frame.
  5. Mark out where the centre of the support posts will be and secure all of these posts to the frame, except the centre post.
  6. Add your central support joists. These should run in the same direction as the deck boards will run. You’ll need to measure from the inside of the frame on one side to the inside of the frame on the opposite side. Attach the joist in the same way as you did for the other posts. Repeat so the centre post is in between two sections of frame and secure the posts with concrete.
  7. Trim down all the posts to the correct height using a saw.
  8. Add your weed-control fabric and weigh down with gravel across the entire area.
Add your joists
  1. Measure 400mm from the centre of the outer frame and mark a line. This will be where the first joist is positioned. Repeat at 400mm intervals down the length of the frame – if the last one will be more than 400mm, add another joist to create enough support.
  2. Attach a joist hanger to each end of the joist.
  3. Place the joist in position so the centre lines up with the 400mm spacer mark.
  4. Secure using external grade screws once you’re happy that the joist is flush with the frame.
Lay your decking boards Refer to our FAQ on how to lay decking to see how you should attach your decking boards. Remember: Always treat cut ends and pilot holes with decking preservative to keep your decking in good condition for as long as possible. Building a raised deck isn’t a straightforward task. If you’d rather leave it to the professionals, get a range of quotes to help you get the best price and a high quality finish.
How to lay decking on uneven ground?
There are two ways to lay decking on uneven ground. We’ve explained how to build a raised deck in our FAQ ‘How to build a raised deck’ above, and that’s great for uneven ground or sloped gardens. But there’s another way that you can lay decking on uneven ground if you don’t want a raised deck: you can create a level supporting base. We’ll go through the basics here. Materials you’ll need
  • Paving slabs – old or cheap ones are fine
  • Timber for the frame and legs
  • Type 1 MOT hardcore
How to lay decking on uneven ground
  1. Mark out the area as we explain in ‘How to lay decking’. Then, dig to 200mm below where you want to surface of the decking to be.
  2. Add a 50mm layer of hardcore and make sure it’s compact.
  3. Build the decking sub-frame as we describe in ‘How to build a deck frame’.
  4. Lay out paving slabs along the edges and in the centre of the area. This will help to spread the weight of the decking.
  5. Set the decking frame on the slabs, checking for high or low points and adding off-cuts of timber where needed. Don’t forget to sand and seal these off-cuts with decking preservative.
  6. Add your joists and then the deck boards, leaving the recommended gaps of expansion of between 5-8mm.
Building your decking on top of paving slabs is a good way to get it level, but you still may not be able to get as good a finish as if a professional did it. If you’re in any doubt, get in contact with some decking specialists and see what they would recommend.
How to make steps for a deck?
Unless you built a ground-level deck, you’re going to need steps to go with it. Check Building Regulations to see if you need to install handrails as well. It’s good practice to:
  • Have a step tread width of 900mm – if you don’t want them that wide, they should be no less than 760mm
  • Add a central step riser to stairs wider than 900mm to prevent them buckling
  • Add a step depth (the vertical distance between each step) of between 150 and 180mm if building your own riser, so the steps are at a comfortable depth
Getting started To build your steps for the deck, you’ll need:
  • Step treads (the actual step themselves)
  • Step risers
  • Coach screws
  • Deck screws
  • Saw
  • Drill
Make the steps for your deck
  1. Make sure the ground where you want to put your steps is level and firm. If it’s not, consider laying concrete or paving slabs to provide a secure surface for your steps to sit so they don’t sink.
  2. Grab some joist off-cuts and cut them to the same width as your step treads. Attach them to the step risers at the top and bottom using countersunk coach screws.
  3. Place the steps against the sub-frame of the deck; if you’ve put slabs down for support, make sure the steps sit in the middle of them. The longest edge of the stair riser should be on the slabs, and the short edge against the deck. Drill pilot holes through the step and sub-frame joist, then screw the step to the sub-frame with more coach screws.
  4. After drilling pilot holes, screw the treads into the risers at each end with deck screws.
  5. If you don’t want gaps between each stair, you can add joist off-cuts or deck boards. Measure the height and depth of the gap, then screw the off-cut or board into the step riser with two screws at each end.
Placholder Image

Other Top Projects in Halesworth

Related Projects

Customer Reviews

Overall rating:


Halesworth Wooden decking installers are rated 4.5 out of 5 based on 5 reviews of 76 pros.
The LeadsDoWork rating and review is an overall rating based on verified reviews and feedback from the customers with Wooden decking projects that have been connected with Wooden decking pros to help them. All Wooden decking contractors All Halesworth Wooden decking contractors

Useful Wooden decking Links

Need more help?

Renovating a large 4 piece bathroom in Exeter Published: 12/01/2025 Transform your large 4-piece bathroom in Exeter with expert renovation services. Modernize your space with bespoke fittings and high-quality materials. Read this article
Apex roof replacement on concrete garage in Sutton Published: 12/01/2025 Replace the apex roof on a concrete garage in Sutton, ensuring a weatherproof solution with durable materials and updated wooden gable ends. Read this article
Laminate flooring and skirting board fitting in Doncaster bathroom and landing Published: 12/01/2025 Professional fitting of laminate flooring and skirting boards for a bathroom and upstairs landing on Stoops Lane, Doncaster. Expert installation tailored to your home. Read this article

Are you a carpenter in Halesworth?

We can help you get more wooden decking work with our qualified job leads and boost your business.

Join today