- Start in one corner of the sub-frame and position the first board across the inner joists. You want the deck board in the opposite direction to the inner joists, ensuring that it’s flush with the frame. Position any end-to-end joins between the deck boards halfway across an inner joist so you can screw both boards into the joist for stability. Make sure you keep a gap of between 5-8mm to allow for expansion of the wood.
- Begin to screw your deck boards to the joists. You’ll need to secure the deck board to every joist is covers along your deck frame. Use two screws for every joist. Mark where you’re going to add your screws, ensuring that they are at least 15mm from the end of the board and 20mm from the outside edges. Drill pilot holes for the screws, being careful to only drill through the deck board and not the joist. Then screw the decking screws into the holes.
- Continue to screw in the deck boards, ensuring you leave the correct expansion gap. You can stagger the deck board joins across the deck for more strength.
- Sand down any cut ends if you need to before applying decking preserver to protect the timber from rotting.
Cockburnspath
Cockburnspath (population 411) is a town in the Scottish Borders location of Scotland. It lies near the North Sea shore in between Berwick-upon-Tweed and Edinburgh. It goes to the eastern extremity of the Southern Upland Method a long-distance footpath from the west to east shore of Scotland. It is also the termini of the Sir Walter Scott Way and also the Berwickshire Coastal Course. At the nearby village of Cove, there is a little fishing harbour.