Wall Tiling in Portsmouth

Compare Wall Tiling Prices in Portsmouth

Home > Tiling Projects > Wall tiling > Portsmouth

Wall Tiling in Portsmouth

Are you looking for Wall tiling in Portsmouth? Our network of installers can help with your project. All of our Tiler in Portsmouth are examined so you can see local honest reviews, when the business was founded, rankings, approval and also day rate,  permitting you to make the ideal choice on who to employ. Allow us take the problem out of discovering up to 4 professionals for your Wall tiling project.

Wall tiles are a popular choice for wall covering. Wall tiles are frequently utilised in bathroom and kitchens, but wall tiling is increasingly typical in other locations of the home. Wall tiles are available in a huge variety of colours and designs to suit any design of interior style. They're similarly offered in a range of materials including natural stone, porcelain or ceramic. Wall tiles are very resilient along with being water and stain resistant. This makes them suitable for usage in places like kitchens or bathrooms. It's vital to be sure that wall tiles are fitted on top of an appropriate surface. This means that the plasterboard or other wall surface must be clean and in great condition. If the wall surface is in bad condition, the tiles may not be thoroughly water-proof or could even be cracked from the irregular surface with time. Some tiles are intended to be fitted to walls. You should only select wall tiles that are specified to be used on walls, as these are thinner and lighter than floor tiles. Floor tiles are not appropriate to be fitted to walls and might even cause damage to them if utilised. Skilled tiling firms can advise you of the most suitable tile to choose on your walls. They will also be able to fit the tile to a superior quality and make sure that they will last for their entire life-span.

We will provide approximately four Wall tiling pros locally, that will certainly provide quotes for the work you desire done. You'll get a home visit from specialists in Portsmouth that'll assist you to choose the ideal Wall tiling for your house before accomplishing the setup. Enter your postal code to start searching currently.

Average Wall tiling cost in Portsmouth

The typical cost of Wall tiling is £700. Costs can change based upon the materials and the tradesman picked. The upper price range can be as high as £805. The material costs are ordinarily around £175

Average price per Wall tiling job in 2024

Avg. price low

Avg. price low
£525

Avg. price

Avg. price
£700

Avg. price high

Avg. price high
£805

£1000

£750

£500

£250

£0

Prices based on actual Wall tiling costs for Portsmouth, as reported by local LeadsDoWork members.

Wall tiling installation cost in Portsmouth 2024

Labour cost £490
Material cost £175
Waste removal £35
Time frame: 1-4 days

Wall tiling searches in November 2024

Wall tiling Projects in Portsmouth in October 2024

6,538

Requests for quotations in Portsmouth in October 2024

0

Requests for Wall tiling quotations in Portsmouth in October 2024. 0% change from September 2024.

0

Requests for Wall tiling quotations in Hampshire in October 2024. 0% change from September 2024.

Source: Numbers calculated based on the search volumes in major search engines

Wall tiling searches in cities and towns near Portsmouth October 2024

Portsmouth

Portsmouth is a huge city to the southern coast of England and is also the 14th biggest urban location in the country. Portsmouth acquired fame from its port, which like lots of others in Britain, was intensely targeted in World War Two by German bombers. A great deal of the city has long been renewed over the last six decades but we receive loads of requests to get the best tradespeople in Portsmouth all through the year in several house improvement categories.

Looking for Wall tiling in Portsmouth?

Get free quotes from local tilers

Get free quotes

How it works

Tell us about your Wall tiling project

Answer a few quick questions, so we can match you with professionals who can help.

Find up to 4 Tilers in Portsmouth

Get free, no-obligation quotes from 4 verified Tilers working in Portsmouth.

Hire with confidence

Compare customer reviews, services and prices, and choose the right professional for you.

Our reviews

Average

Would highly recommend

Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.

Good easy way to find a selection of…

Good easy way to find a selection of trades you need all in one place.

Love LeadsDoWork it's a big part of my …

Love LeadsDoWork it's a big part of my Business I would recommend to anyone

FAQs

How to tile a bathroom wall?

How To Tile A Bathroom Wall

Tiling your bathroom walls will not only increase the visual appeal of your space, but also provide an additional layer which helps protect against potential moisture damage, moist growth and also makes the bathroom a lot easier to clean up. So if you’re are looking to tile your bathroom, it’s recommended to get in touch with a skilled professional to ensure you get the best results. However, this guide will provide you with a good insight on how to get through the process smoothly and avoid costly errors. Let’s take a look!

lPrepare The Wall’s Surface

• Make sure that the surface is clean, smooth and dry.

• If there are any dips or holes, ensure to have them patched or sanded.

• Measure the area to be tiled and shape the backer board to fit, if a new wall surface is necessary.

• Cover the new surface area with adhesive to attach the back board to the surface.

lMix The Mortar

• Firstly determine the tile layout and make a layout tool

• Install the datum

• Follow the instructions of the adhesive package as the type you’re to use depends on the wall type.

• Create a consistent and smooth paste by mixing the adhesive with water.

lInstall The Tiles

• Using a notched trowel, spread the mortar.

• Put a thin layer at the back of each tile and press it against the surface.

• Create ridges using the notched side of the trowel.

• Clear out any excess adhesive on the tile’s surface as you continue.

• Put the spacers at the joints

• Remove the datum planks when ready to install the outer edge tiles.

lApply The Grout

• Put the grout over te tiles with a grout float

• Clean out excess grout with a damp sponge

• Seal the tiles once the grout is dried

How to tile an uneven wall?

How To Tile An Uneven Wall

Do you know it’s almost impossible to find a wall in any home that’s fully flat and vertical? Just like floors, walls also have areas of imperfection or where they’re a bit uneven. When it comes to tiling, these are the problematic areas in which you must work around and identify how to solve to achieve a perfect finish. If not, you may as well just have the tiles sticking out and making room for moisture to creep in affecting the longevity of your project.

There a variety of options to tackle an uneven wall surface and one of the best is plastering. To make sure the surface of your wall is even, a great step would be to plaster it. Plastering of a wall can be a very simple task, however, if you lack proper training or experience, you might want to consider getting a skilled professional to handle the project for you. Making sure the surface of your wall is even is a crucial step in the tile installation process and can be quite tricky on your first trial.

Uneven wall is usually as a result of two major factors - sagging of the wall over time and the wall’s surface is not completely flat. To solve this, you’d have to detach the boards. Then, attach a new board and re-skim the walls to create a new flat and even surface you can work on. For small imperfections and dips, simply use an adhesive cement to fill in the gaps in the plaster. This approach is perfect for holes and ding with a depth that’s not more than half a centimetre. When the cement is totally dry, you can sand it to achieve a flat finish. Happy Tiling!

How to tile a wall?

How To Tile A Wall

If you’re not an expert floor installer who would take wall tile installation as merely being a vertical floor, you are advised to be very cautious when tackling the project. The installation of wall tiles follow some set of rules which you’d better not break if you really wish to protect your investment. And worst of all, a wall tile done wrong is a lifetime penalty of having to look at it. So how can you get it right? Well, probably by reaching out to a wall tile installation professional for a good quality solution that’ll save you time, money and effort. However, we’ve put together this guide to help give you an insight of how it works and also to help you avoid some unnecessary expenses. Let’s have a look!

lHang a batten board

• Start your rows of tiles or bottom-most course with a batten board which works to prevent spillage of tiles.

• Position the batten board at 3/4 of the tiles’ height. Ensure not to start at the floor.

lForm A Pyramid Shape With The Tiles

• If you’ve reached the bottom row of tile, then arrange the tile in a pyramid shape. To achieve this, you’d have to install the tiles one through four as instructed. Each following row will be draped over the pyramid.

lExamine The Floor For Level & Walls For Plumb

• If your floor level or plumb is off by a maximum of a half-inch over the course of 8 feet, add extra baseboards and trim to cover up the problem.

lThe Least Size Of Tiles To Be Used Is Half-Wide

• Ensure that no “silvers (tiles that are lower than half the width of the tile in question) are incorporated in the project.

How to take tiles off a wall?

How To Take Tiles Off A Wall

The bonding agent or adhesive usually incorporated to hold a tile against the wall are always very strong or else you’ll find your tiles peeling off. As a result, to have them removed is not the easiest of tasks and bashing them with a hammer, will only have them broken leaving you with the task of having to scrape off the pieces. A better and much easier approach to removing tiles from a wall will be to pry them off one after the other. So how do you go about this? Let’s have a look!

lSafety First, Then Remove The First Tile

• Wear a protective eye goggle and gloves.

• Break up the grout around a tile located atthe wall’s centre using a putty knife and hammer.

• Place the putty knife under the the tile and gently it with the hammer.

lRemove The Remaining Tiles

• By tapping and prying using the tools - hammer and putty knife, wipe off all the tiles in the vertical row.

• Once done, continue to detaching the tiles in the adjacent rows until you’re able to open a wallboard section that’s around 12 inches wide and does not obstruct a stud.

• Use a keyhole blade to poke it through the wallboard.

• With the help of a reciprocating saw, cut out the wallboard’s section.

lCut The Fasteners

• Using a metal-cutting blade, cut te wallboard-holding fasteners. Make sure the fasteners holding the wallboard to the top and bottom plates of the wall are both detached.

lRemove All Wallboard Sections

• Using a similar approach, gently remove the other sections of the wallboard.

• Once completed, you can easily sweep the tiles’ broken pieces.

• Finally, vaccum the grout dust to ensure the work is neatly done.

If you lack a proper training or experience, taking off your tiles from a wall is best left to a skilled professional for the best results and to prevent potential damages which can lead to additional costs.

Placholder Image

Other Top Projects in Portsmouth

Are you a tiler in Portsmouth?

We can help you get more Wall tiling work and boost your business.

Join today