uPVC Window Spraying in Newton Stewart

Over the years, UPVC spray painting has grown to become a standard practice. Previously, what was done when people wanted to change the colour of their UPVC window is simply to replace the old ones. However compared to the cost of replacing the units, it’s actually a lot easier to simply have your UPVC windows sprayed and even more importantly, at just a fraction of the replacement cost. If you’re thinking about spraying your upvc windows, then you’ve come to the right place! In this post, we’re going to take you through the entire process. However, if you lack the confidence needed to pull this off, we’d strong advise that you get in touch with a professional to avoid make costly errors or mistakes.

The first step to successful upvc window spraying is always to make sure that the upvc is properly cleaned by removing any loose dirt and residue, getting rid of any muck and grime which has developed over the years. You can also abrade the surface in a very light manner to leave upvc frames with a key to make the paint adhesions stronger. Once you’re done with the preparation, the obvious next step is masking off. This process requires you to protect the walls, glass, floors and brickwork from any potential over spray. To achieve this, you can make use of masking papers.

Upon completion of the masking off process, then its time to spray paint the upvc windows using a spray gun and spray painter. This requires a lot of practice as it could be very dangerous as you can inject yourself with paint, which can be seriously fatal.

If you happen to possess a upvc door, then you’re likely to notice two main things about about it. Firstly, it’s built to last and will most likely work perfectly well for several more years to come. Lastly, after just a couple of years, it’ll start showing signs of ageing - it starts to fade and becomes dull or discolour which is a problem that’s commonly identified with white plastic after some time and even more so when exposed to the sun and rain year in year out. Unlike back in the days where you’d have to replace your old upvc door due to discolouration, now you’d only have to repaint it which will only cost just a fraction of the price that would have been expended to get a replacement upvc door. By painting your upvc door, you’ll have it looking its best again while also adding to the curb appeal of your home.

Now painting of a upvc door is a very tricky and dangerous affair as it requires a lot of practice and any if proper care is not taken, you can easily inject yourself with paint. As a result, if you lack the skill or confidence required to carry out this task, then we’d strongly recommend you get in touch with a professional who can guarantee the best results the first time. If you wish to paint your upvc door, here are the four simple steps to it:

1. Remove any door furniture
2. Prepare the upvc door for the painting
3. Select a paint that’ll work on upvc doors
4. Decide on the finishing touches

The quick and simple answer to this question is yes, upvc spraying is, in fact, largely beneficial! When it comes to helping your home or property rediscover its lost spark, upvc spraying is definitely a super convenient and effective solution you should consider. The drawback with UPVCs in general is the fact that they tend to get discoloured, scruffy or dull over time due to the elements as well as usage. In the previous years, when this occurs, the only option home and property owners had available to them was to replace the expensive upvc. However, good news is, you no longer have to go that length to have your home revitalized any more. With spray painting services for your home, you can easily achieve great results with little investment.

Using advanced technology as well as specially formulated paints, you can totally transform your home using just a fraction of the replacement cost within just a couple of days. If your upvc features appear to be quite unsightly and dull, spray painting can instantly improve their appearance while also enhancing the appearance of the whole property as well. Here are some of the benefits associated with spray painting:

• It helps you save money. Being an affordable alternative, spray painting upvc is about 75 percent cheaper when compared to the replacement cost.
• Improved appearance. This can instantly elevate the appearance of your home or make it an attractive choice for buyers if you wish to sell.
• Strengthen and protect. Using specially formulated paints and professional application, you can achieve long lasting and durable results.
• Finishing touch. There’s a variety of finishes you can opt for such as a satin, gloss or matt finish.

This is one of the most common questions when it comes to upvc windows. If you’re also interested in knowing the possibility of spraying white upvc windows grey, then you’ve come to the right place! In this post, we aim to answer this question once and for all.

The short and simple answer to this question is yes, you can definitely spray white upvc windows grey! In fact, you can spray white upvc windows with any colour of your choice. So far, the most used colour is the anthracite grey, but you’re not restricted to that. You can also make use of agate grey, French grey, window grey, battleship grey and lots more! However, it should be noted that spraying white upvc windows grey is in no way an easy task as it requires lots of experience and practice.

The spraying process usually starts with a thorough cleaning of all the surfaces to be sprayed using a specialist solvent upvc cleaner. Once done, you’ll have to get rid of any existing silicone from around the frames because the paint won’t adhere properly to silicone. Upon completion, you can then proceed to masking up the surrounding brick or stone, glass, openings into room, furniture, paths or plants and many more to protect them from potential paint overspray. Now to spray the paint, you can make use of a spray gun and spray painter. Before you start painting, you can apply a light dust or mist coat to identify any contamination left on the surfaces. Once this has dried without any negative reactions, you should spray two further coats (some colours may require up to 3). leave for up to 20 minutes to dry and remove all masking.