Tree Surgery in Willenhall

Do you have a large tree on your property and wondering how much it would cost to have it totally removed? If yes, then you’ve come to the right place. Generally, the average cost of a tree removal can widely range due to a number of reasons which includes the size, heigh, diameter, location in the garden as well as the type of the tree. And as you would have expected, the larger your tree is the more you’re definitely going to pay to have it completely removed. While being large, another important factor that influences the price is the ease of access. This means that the more difficult it is to get to the tree the more strenuous and longer it’ll take to be felled, hence the more the price that’s likely to be charged when compared to a similar-sized tree which is more accessible.

Generally for a day’s work, a tree surgeon will charge within the range of £150 to £200, and will usually work with one or two general labourer. As a result, you can expect to pay about £300 to £500 in a day as cost of labour if there happens to be up to three labourers.

In short, to cut down a large tree of about 50 feet to 75 feet, this will usually take about one to two days and cost within the range of £650 to £1,200. Meanwhile an extra large tree which is beyond 75 feet will take about 2 to 5 days to cut down and cost within the range of £1,000 to £2,500. However, you should have it in mind that the price that will be charged will be based on a number of factors like the overhang, tree type, access, disposal, closeness to public footpath or road and more.

Have you being considering the options available to you for removing the conifers around your home? Or perhaps you’re just planning to raise some structures in an area where you have lots of conifer trees. Regardless of your reason for wanting to remove a conifer tree, you’ve come to the right place!

There are multiple options to remove a conifer tree based on the one that best suits your needs. Some individuals are okay with felling the tree and leaving the stumps behind, while others don’t just want both the tree and the stumps so they poison the tree and subject the stumps to a quick rotting process.

lThe Physical Method

This basically involves felling the trees with the help of powerful machines and other tools. Let’s take a look!

• Early preparation. Get your chainsaw ready alongside your pruning tools as well as other equipments that can prove to be useful.

• Determine the direction you want the tree to fall. You must ensure there’s no passerby risk or risk of damage to any property whatsoever.

• Cut down the trunk. Put your chainsaw to use. First cut doen the branches and twigs before felling the tree.

• Choose your cutting technique depending on the tree’s size, slope and chainsaw available.

• Check for possible infestation before removing the conifer tree.

• Remove the conifer stumps by grinding the stumps out (use a grinder) and setting fire to consume the stumps.

lThe Chemical Method

To carry out this process, you need to first cut down the large tree branches using a chainsaw. Once done, cut off a portion around the circumference of the trunk below the lower branches, close to the root. Leave the bark’s strips connected to the conifer tree to expose the inner tissue.

Mix the chemicals and apply into the conifer tree directly until the whole surface is covered. This will make the conifer tree to die off gradually for a couple of weeks.

Even if your trees are not obviously damaged or diseased, tree surgeons can carry out surveys to determine if there is any work that needs to be carried out. This work could range from removing dead branches, pruning to promote growth, or even crown works which could open up more light into your property by altering the height and size of nearby trees.

The decision to purchase a property may not come with trees as an influencing factor. However, when the trees start to get overgrown or appears sick you will have to consider the regulatory status which may affect your ability to prune, fell or remove them.

First and foremost, the owner of the tree must be determined and this is the individual who owns the land on which the tree was originally planted. However, if you’re not the owner but the tree overhangs your land you’re allowed to cut the branches back up to the boundary, if the tree is unprotected. In such cases, you normally do not need to seek the consent of the original tree owner or neighbouring land owner to perform the works to the tree. But the branches and fruits on them ( if any) still remains that of the land owner and they’re to be returned to them if necessary.

In situations whereby you’re the owner of the tree, you’re required to determine whether or not your tree is protected by a Tree Protection Order ( TPO) before any action can be taken. The main goal of a Tree Protection Order is to provide protection to trees which are considered to deliver amenity values to the general public. In other words, if your tree can be viewed by the public and enjoyed from outside your garden’s confines then there’s a high possibility that it’s subjected to a TPO.

To confirm whether or not your tree is subjected to a TPO, you can check with your local planning authority (LPA). However, there are some local council websites that displays all TPOs registered within their jurisdiction.