Bathroom | Basin, Bath, or Toilet Fit Only
Coalville, Ibstock, Markfield - LE67
Enquiry from: Frank S
Start Date: Immediate
Toilet needs new flush unit fitting. Also tap needs new washer fitting.
Are you seeking Shower or Bath Fitting in Leicestershire? Our network of fitters can aid with your project. All of our Plumber in Leicestershire are checked so you can see local write-ups, when the business was created, reviews, satisfaction and price, enabling you to make the right choice on who to work with. Let us take the trouble out of locating up to 4 professionals for your Shower or Bath Fitting job.
When it pertains to the bathroom it won't always be essential to have a complete redesign. Finishing a bathroom refit can be costly as well as you'll be without the waterworks until the installation has been finished.
By changing specific bathroom units such as the commode or shower, you'll provide the room a refresh without the expense connected with a full refit. However remember, for all setups in the restroom you'll require the services of a trusted plumbing professional. Nevertheless, you're connecting to the primary pipes and also one incorrect step can see the location swamped.
Also suitable a brand-new toilet can be a headache and depending upon the layout, the drain may require to be relocated also. Make certain to utilize a vetted specialist as well as take pleasure in the advantages of a brand-new installation.
We will give as much as 4 Shower or Bath Fitting pros in your area, who will use quotations for the job you want done. You'll get a home visit from specialists in Leicestershire that'll help you to pick the right Shower or Bath Fitting for your residence before executing the installation. Enter your postal code to begin looking currently.
The regular cost of fitting a shower of bath is £350. Costs vary based upon the materials and the business chosen. The upper price range can be as high as £402. The material costs are typically about £87.
Avg. price low | Avg. price low |
---|---|
Avg. price | Avg. price |
Avg. price high | Avg. price high |
£1100
£825
£550
£275
£0
Labour cost | £245 | |
Material cost | £88 | |
Waste removal | £18 |
Requests for quotations in Leicestershire in August 2024
Requests for Shower or Bath Fitting quotations in Leicestershire in August 2024. 0% change from July 2024.
Requests for Shower or Bath Fitting quotations in East Midlands in August 2024. 0% change from July 2024.
Coalville, Ibstock, Markfield - LE67
Enquiry from: Frank S
Start Date: Immediate
Toilet needs new flush unit fitting. Also tap needs new washer fitting.
Leicester - LE9
Enquiry from: Sandie S
Start Date: Immediate
Replace bath and tiles/panel
Leicester - LE4
Enquiry from: Don B
Start Date: Immediate
we need an upsatairs closed toilet supplied and fitted and the old one disposing of are you the property owner: owner of the property what do you require in your bathroom: toilet what level of servic...
Leicester - LE2
Enquiry from: Angela W
Start Date: Immediate
We need a new toilet and basin, with new taps fitting in our bathroom.
Loughborough - LE11
Enquiry from: Jamie A
Start Date: Immediate
A new shower bath tub installed.
Leicester - LE2
Enquiry from: Rano G
Start Date: Immediate
i need full replacement of shower cubicle, toilet, sink, fan , radiator and cladding the ceiling, vinyl on floor, basically modernising my en-suite. are you the property owner: owner of the property w...
Wigston - LE18
Enquiry from: Ashraf B
Start Date: Immediate
Submit your free quote for rated tradespeople
Leicester - LE2
Enquiry from: Dinesh V
Start Date: Immediate
Homeowner Please contact to appoint
Hinckley - LE10
Enquiry from: James H
Start Date: Immediate
Replace damaged curved plastic shower rail with stainless tubular type with external curtain rings,sliding on rail o.dia. Rail to be secured to walls with 2 substantial end flanges Are you the p...
Leicester - LE4
Enquiry from: Lucy R
Start Date: Immediate
Install a shower
Leicester - LE5
Enquiry from: Mona A
Start Date: Immediate
Toilet to be moved from current position to a side wall
Leicester - LE3
Enquiry from: Katie U
Start Date: 1 to 3 months
Turning empty space at the front of the house into downstairs toilet. Are you the property owner: Owner of the property What do you require in your bathroom: Toilet, Basin What level of service do you...
Leicester - LE4
Enquiry from: Bharat C
Start Date: 1 to 3 months
Work description: I want old tiles remove. Old bath and shower suite remove. Floor remove. I would like to have whole bath really tiled floor tiled shower sink toilet fitted and have featured walls d...
Leicester - LE5
Enquiry from: Raiysha P
Start Date: 1 to 3 months
Purcahsing anew build property. Looking to have a shower over the bath. They have quoted us £900. Are you the property owner: Owner of the property What do you require in your bathroom: Shower What ...
Loughborough - LE11
Enquiry from: Peter S
Start Date: Immediate
To fit a toilet under the stairs and possibly (if it fits) a hand basin.
Leicester - LE4
Enquiry from: Kamlesh R
Start Date: Immediate
Toilet and wash basin fitting. Also removing old shower tray
Loughborough - LE11
Enquiry from: J
Start Date: Immediate
To remove existing whirlpool/spa bath and to refit a new one. Are you the property owner: Owner of the property What do you require in your bathroom: Bath Have you considered replacing your whole ba...
Wigston - LE18
Enquiry from: S B
Start Date: Immediate
Customers own description of work to be carried out: INSTALLATION OF NEW BATHTUB Please contact to appoint
Loughborough - LE11
Enquiry from: Ian B
Start Date: Immediate
Customers own description of work to be carried out: Remove old close couple toilet plus basin and pedestal,fit new replacements supplied by me which are same as old ones.. Are you the property ow...
Leicester - LE3
Enquiry from: Kamal S
Start Date: Immediate
Installation of downstairs toilet. Hoping there is enough space under the stairs. Are you the property owner: Owner of the property How old is your property: 50 years + What level of service do y...
Answer a few quick questions, so we can match you with professionals who can help.
Get free, no-obligation quotes from 4 verified Plumbers working in Leicestershire.
Compare customer reviews, services and prices, and choose the right professional for you.
Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.
Good easy way to find a selection of trades you need all in one place.
Love LeadsDoWork it's a big part of my Business I would recommend to anyone
If you’re about to get a new bath installed in your home or property, then its only wise to carry out a research to determine the cost to complete such a project. In order to help you make the best informed decision possible, we’ve created this post gives you the price range of the purchase as well as installation of a new bath. Let’s take a look!
There are a number of factors that can influence the total installation cost of a bath, however the main ones include the price of the bath and the installation cost. These two components are higher for steel baths, freestanding bath and whirlpool bath when compared to shower baths and corner baths. In general, it can take within the range of £390 to £5500 to purchase ans install a new bath. Depending on the type, below are the rice range for different type of baths:
And while its possible to get a quick evaluation of the estimated costs when you’re planning to install a new bath, the end figure can vary. Most professional bath installer will charge anywhere between £110 to £500 depend on the type of the bath as well as how complex and intricate the task at hand is.
Once you’ve chosen the perfect feature to suit the shape and style of your bathroom, it’s time to start putting it to good use. Read on for a step-by-step guide on how to install a bath, but first of all, below are the preparatory tools;
Preparation
Before you install a bath, there are some things that needs to be taken into considerations.Once you have decided where you are going to install your bath, use an electronic detector to make sure there are no hidden pipes or wires in the walls where you will be securing the fittings. It is also advisable to choose walls that have a stud so that you can attach your fittings so strongly.
When assembling your bath, lay it on top of a rug or blanket to ensure it doesn’t get scratched, and remove any protective film from the areas you will be working on, such as around the drain and tap fittings, as well as the sides where the bath will sit against the wall. Always turn off the water at the mains beforehand.
Note: The installation process will vary, depending on the design of your bath. It is always necessary to consult the manufacturer instructions alongside this guide.
MATERIALS
You’ll also need an extra pair of hands to help manoeuvre the bath into place.
Step 1
Attach the legs and the fittings by securing the appropriate bolts and channels, and then attach the feet.
Step 2
Measure and adjust the bath's position, Once you are sure that your bath is level, mark the places where it will be secured into the walls and floor. If your bath comes with wall fittings, use your pencil to mark the place where they will be secured to the walls. Do the same for the floor fittings.
Step 3
Prepare the wall for the fittings, align it with the wall at the location you marked and use your spirit level to make sure it is even. Drill holes and secure in place, making sure you use fittings that are suitable for the type of walls in your bathroom.
Step 4
Secure your bath by moving the bath back into the final position and align it with the holes you created, or on top of the timber batten. Once again, check that it is level. Turn the water back on and check for any leaks.
Step 5
Seal around the rim, fill it with water and trace silicone sealant around the edges, where the rim meets the wall. Allow it to dry for the recommended time.
The bath waste is primarily responsible for the safe drainage of the bath once the plug is removed. Generally, it’s connected to the overflow which enables excess water to go away if the plug is in and the bath is overfilled. There are times whereby the bath waste can corrode and start to leak, so when this happens its important to replace the components so as to make sure that there’s no excessive water damage as well as other complications. This is a task any DIYer, regardless of the experience level can achieve, however if you lack the confidence to pull this off, then we’d recommend you get in touch with a professional who can guarantee the best results for help. In this guide, we aim to take you through the bath waste fitting process to ensure you do it the right way. Let’s take a look!
If you just acquired an electric shower or thinking about getting one soon, one of the first things that comes to mind is who to call on for help to handle its installation. Well, if you’re confused about the perfect tradesperson you’re certainly not alone! As we’re always told that electrics and water don’t mix, so who do you call when buying an electric shower? Is it a plumber, an electrician or probably someone who with a knowledge of both? Well, you’d find the answer here as we’ve created this post specifically to resolve this concern once and for all.
Refurbishing and renovating any part of one’s home always tends to be a tricky and daunting prospect and without a single doubt, the bathroom is not an exception. With a wide array of things to put into consideration such as plumbing as well as bathroom electrical safety, it always pays to have all your bathroom related questions answered before you go ahead to employ a tradesperson.
Being fully aware any task involving electrical works can be very dangerous, anyone that takes on a job such as fitting an electric shower must be qualified to work with electrics safely. This is referred to in the building regulations sections which is termed as part P dealing with domestic electricals, as such you may hear tradespeople term themselves as being “Part P qualified. What this implies is that they’re registered with a competent persons scheme like ELESCA OR NICEIC to self certify their work. Due to the high risk involved in their field, all electricians should be able to self certify their work, whereas only some plumbers should also be able to do the same. As a result, dedicated bathroom fitting companies should possess individuals who can deal with the plumbing, electrics as well as tasks such as tiling.
We can help you get more Shower or Bath Fitting work and boost your business.
Join today