Server Room Air Conditioning in Middlesex

Also referred to as Freon, the refrigerant “R22 is a commonly used chlordiflouromethane that’s usually incorporated in air conditioning systems as well as many other refrigeration applications. However, because of the evidence discovered which shows the gas can contribute to the damage of the ozone layer, the refrigerant has now been banned since Dec 31, 2009 as it became legally required that any system making use of R22 and became faulty must be replaced.

Generally, R22 owners in commercial applications are now responsible for checking for leaks, record keeping as well as labelling of equipment using this type of gas. Failure to comply with these directives can lead to hefty fines.

Existing refrigeration and air conditioning equipment that makes use of R22 can still be used. However, the owner of the equipment will be denied any rights to purchase extra tanks of gas that’ll keep the equipment running. In the event whereby an air conditioning system requires a complete recharge of the R22 refrigerant, according to the law, it’ll be considered obsolete and therefore will have to be replaced. What’s more? As the remaining supplies of R22 starts to decline, the price of getting the refrigerant is expected to skyrocket. As a result, do not be shocked if the cost of purchasing more R22 to keep your current equipment running outweighs the cost of replacing your existing equipment with a new and environmentally approved one.

As R22 is gradually being phased out, there are new ozone friendly alternatives which are being introduced into the refrigerant market. Out of these alternatives, the most common one is the R410A, which is purely a combination of hydrofluorocarbons which does not deplete the ozone layer.

Having its usage banned in air conditioning systems and many other refrigeration applications due to the danger it poses to the ozone layer, several companies that are affected by the R22 legislation would possess a policy to identify specific recommended alternatives. If you’re also affected by this new legislation, then you’ve come to the right place. Generally, the alternative that’s selected is usually dependent on the business unit level as well as the business’ energy efficiency requirements.  In this post, we’re going to consider some of the recommended alternatives to the R22 refrigerant. Let’s take a look!

• R140a. This refrigerant is commonly used in industrial refrigeration, residential air conditioning, industrial air conditioning as well as commercial centrifugal compressors.
• R134A. This refrigerant is commonly used in domestic refrigeration, commercial refrigeration, transport refrigeration, residential air conditioning, commercial centrifugal compressors and mobile air conditioning.
• R407C. This is commonly incorporated in industrial refrigeration, residential air conditioning and commercial air conditioning.
• R407A. This type of gas is commonly incorporated in commercial refrigeration, plug ins as well as vending machines.
• MO99 ( R438A). This gas type is common applied in commercial refrigeration, plug ins, vending machines, industrial refrigeration as well as residential air conditioning.
• RS-44b. This is commonly used in all refrigeration systems.

These R22 alternatives are all believed to be environmental friendly having little to no impact on the ozone layer. However, one drawback possessed by of these alternatives is when POE oil is incorporated. This can result in excess moisture which causes acid build up inside the refrigerant lines. What’s more? These refrigerant alternatives also work at a higher pressure which means that it may cause more wear and tear on components.

In a server room, you have multiple electronics in a single room. If you stand a bit close to your personal computer while its still running, you know you’ll definitely feel some heat. Now imagine the amount of heat that would be generated by large servers in a single room (hint: it’s quite much). A server room would be highly uncomfortable to work in with that amount of heat around and beyond that, the heat is also very dangerous to the electronics. It can lead to equipment malfunction or even breakdown. When the equipment in your server room is one that stores all your business’ information, then it’s simply a no-brainer to do everything you possibly can to protect the equipment. Hence, the reason why every server room requires a good and well installed air conditioning system which helps to control temperature as well as moisture in the server room. It also goes a long way to control the amount of dust in the room and dust can also affect the performance of the electronics. Here are some of the reasons why the HVAC system in your server room should be professionally installed.

• The quality is guaranteed. Compared to when the installation project is made a DIY task, a professional installer is able to guarantee a better quality result. They possess the necessary experience, knowledge, tools and skills to make the project a successful one and highly satisfactory.
• They offer technical advice. When you hire a professional HVAC system installer, you also get free advice on a bunch of relevant technical topics and lots more.
• They often offer maintenance guides and after installation support. Companies that are committed to customer service and utmost satisfaction will often provide maintenance guides and technical support post installation. They also give you the opportunity to leave a feedback based on your experience so they can improve on their service delivery.