Commercial / Industrial Roofing in Aughnacloy

Find Commercial / Industrial Roofing Prices in Aughnacloy

Home > Roofing Projects > Commercial roofing > Aughnacloy

Commercial / Industrial Roofing in Aughnacloy

On the lookout for commercial roofing in Aughnacloy? Our commercial roofing specialists in Aughnacloy are going to offer the ideal quotes for getting commercial roofing installed or replaced.

Commercial rooftops might be required for numerous reasons, particularly if the existing roof requires repair or it will be placed on a brand new build.

There are several variables that can contribute to the style and planning of a new commercial roof top and the cost will all be determined by the size and style you select.

Thermoplastic roofing is particularly popular. This sort of roofing is made from a durable material with high temperature tolerance. The material is a favourite for commercial rooftops as it's resistant against ultraviolet and chemical exposure. The roofing lasts for over two decades, with a terrific resistance for fire, punctures and high wind loads.

You can also contemplate EPDM roofing. The durability and flexibility of EPDM roofing makes it a popular material in the commercial roofing world. These kinds of roofing materials have the benefit of being much easier to install, maintain and restore too, adding to their popularity.

If you would like install commercial roofing then make sure to look at prices between vetted specialists in Aughnacloy. By doing this you can get the top price and deal available for you in Aughnacloy.

Average Commercial roofing cost in Aughnacloy

The regular cost of Commercial roofing is £5000. Costs vary based upon the materials and the tradesman hired. The upper price range can be as high as £5750. The material costs are generally approximately £1250

Average price per Commercial roofing job in 2024

Avg. price low

Avg. price low
£3,750

Avg. price

Avg. price
£5,000

Avg. price high

Avg. price high
£5,750

£6300

£4725

£3150

£1575

£0

Prices based on actual Commercial roofing costs for Aughnacloy, as reported by local LeadsDoWork members.

Commercial roofing installation cost in Aughnacloy 2024

Labour cost £3,500
Material cost £1,250
Waste removal £250
Time frame: 1-2 weeks

Commercial roofing searches in November 2024

Commercial roofing Projects in Aughnacloy in October 2024

65

Requests for quotations in Aughnacloy in October 2024

0

Requests for Commercial roofing quotations in Aughnacloy in October 2024. 0% change from September 2024.

0

Requests for Commercial roofing quotations in County Tyrone in October 2024. 0% change from September 2024.

We recorded 65 requests for house improvement prices in Aughnacloy. Of these quote requests the volume of commercial roofing (type: commercial roofs, green rooftops, thermoplastic roofs etc...) was 0. Quotatis were able to match these consumers with up to four ideal experts who had been readily available for work in Aughnacloy during that time.

Source: Numbers calculated based on the search volumes in major search engines

Commercial roofing searches in cities and towns near Aughnacloy October 2024

Northern Ireland is the Irish area of the United Kingdom, with the Republic of Ireland providing the remainder of the island. It comes with a population of just over 1.8 million, plus a population density of 133 people per square kilometre. This population is just 3% of the United Kingdom and 28% of people on the island of Ireland. Northern Ireland’s capital city of Belfast holds the most significant population of around 340,000, while Derry and Lisburn have 100,000 and 45,000 respectively. For all your home improvement projects in Northern Ireland, use reputable specialists to make sure you get a high-quality finish.

Looking for Commercial roofing in Aughnacloy?

Get free quotes from local roofers

Get free quotes

How it works

Tell us about your Commercial roofing project

Answer a few quick questions, so we can match you with professionals who can help.

Find up to 4 Roofers in Aughnacloy

Get free, no-obligation quotes from 4 verified Roofers working in Aughnacloy.

Hire with confidence

Compare customer reviews, services and prices, and choose the right professional for you.

Our reviews

Average

Would highly recommend

Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.

Good easy way to find a selection of…

Good easy way to find a selection of trades you need all in one place.

Love LeadsDoWork it's a big part of my …

Love LeadsDoWork it's a big part of my Business I would recommend to anyone

FAQs

What is the best commercial roofing material?
The best commercial roofing material for your building will depend on the size and type of roof you have as well as your budget. A lot of commercial buildings have flat roofs, but some have pitched roofs. These days, flat roofs are almost flat, but are usually built on a small slope so water can drain effectively. Pitched roofs are much steeper and are made using tiles or shingle. Our top choices for commercial flat roofs would be fibreglass or EDPM rubber. Both of these materials will set you back around £80-110 per square metre, making them some of the most expensive flat roof materials, but they’re strong and durable. A fibreglass roof consists of a cut glass fibre mat that is pressed on the roofing frame, then resin is poured and rolled over the roof before a topcoat is applied. An EDPM roof involves laying an EDPM rubber membrane on the roof surface then gluing it down and coating it with a contact adhesive. For pitched commercial roofs, our top material would be concrete tiles or metal. Concrete tiles will set you back anywhere between 40p and £2.90 per tile and they’re long-lasting and fire-resistant. However, they are heavy and can be susceptible to high winds. Metal roofs have been used for over 50 years and today’s modern systems are extremely strong and allow for structural or thermal movement. Aluminium roofs will cost between £40-75 per square metre, plus installation. These days, flat roofs are almost flat, but are usually built on a small slope so water can drain effectively. Pitched roofs are much steeper and are made using tiles or shingle. Our top choices for commercial flat roofs would be fibreglass or EDPM rubber. Both of these materials will set you back around £80-110 per square metre, making them some of the most expensive flat roof materials, but they’re strong and durable. A fibreglass roof consists of a cut glass fibre mat that is pressed on the roofing frame, then resin is poured and rolled over the roof before a topcoat is applied. An EDPM roof involves laying an EDPM rubber membrane on the roof surface then gluing it down and coating it with a contact adhesive. For pitched commercial roofs, our top material would be concrete or clay tiles. Concrete tiles will set you back anywhere between 40p and £2.90 per tile and they’re long-lasting and fire-resistant. However, they are heavy and can be susceptible to high winds. Clay tiles cost as little as 50p to £2 each and can last over 50 years, but they are heavy so if your commercial roof isn’t already, it will need to be reinforced.

How long does it take to fix a roofing sheet on a commercial property?

How long it takes to fix a roofing sheet on a commercial property will depend on the size of your roof and how difficult access is. Corrugated iron roofing sheets are much easier to fit than other roofing materials such as clay tiles or EDPM rubber, so that will work in your favour.

The size of the team of the roofing company you engage will also make a difference. If they have a lot of tradespeople working on your roof with lots of experience, it will take less time, while if there are only a couple of people it will take longer.

Another thing to bear in mind when considering how long it will take to fix a roofing sheet is the weather. If it starts to rain, the contractors will probably have to stop and wait, as the roof will be too slippery to work on.

In general, it should take between 1 and 3 days to fit roofing sheets on a commercial property. If you’re not having a full roof replacement, it may only take one day, whereas a completely new metal roof could take up to 3 days.

How to install commercial rubber roofing?

How you install commercial rubber roofing is similar to fitting it on a residential property, except that the area that’s covered is likely to be bigger. With commercial properties, you should always leave any maintenance and repair works to the professionals – whether you own or lease the property, you could invalidate any insurance if you try to install rubber roofing yourself. We’ll outline the steps roofers will take when installing rubber roofing on a commercial property.

Firstly, the installers will remove any existing coverings and clean and dry the surface thoroughly. This is vital in ensuring that the rubber will stick. They will then unwrap the EDPM rubber membrane and leave it to rest until it’s fully expanded. On a warm day this may take around half an hour.

Next, the roofers will work with half a sheet of rubber at a time and adhere it to the roof surface. They may use a water-based adhesive which they will spread onto the roof in sections, then roll the membrane onto the surface before moving onto the next section. If they’re using a bonded adhesive, they will apply it to both the roof and the rubber and leave it to dry until it’s tacky before extending the membrane.

Once the EDPM rubber is rolled out, the installers will brush the surface with a large broom to get rid of bubbles and provide a stronger bond. Then they will work of the edges, applying adhesive to roof and walls edges, sealing corners and creating watertight seals. They’ll also tidy up any excess membrane and seal all the trims.

As long as it’s installed correctly, your commercial rubber roofing should last you decades without any repairs needed. It’s always best to inspect your roof regularly to spot any damage before it becomes a bigger problem.

What is commercial roofing?

Commercial roofing simply refers to any roofing work, including installation and repair, that is done to commercial buildings. This might include office roofs, shop roofs or commercial unit roofs. Every building needs a roof to keep out the rain!

Since looks aren’t usually the first priority with commercial buildings, lots of commercial properties have flat roofs. These are often made from felt, EDPM rubber or fibreglass. Felt is the cheapest commercial roofing material, while fibreglass tends to be the most expensive. In felt roofs, roofers use an adhesive to stick roofing felt onto a frame. EDPM rubber roofs have a rubber membrane that is laid down and glued onto the roof and coated with a contact adhesive, while fibreglass uses a cut glass fibre mat that is pressed on before a resin and topcoat are applied.

Not all roofing companies will offer commercial roofing services, because generally the buildings tend to be bigger. Small companies won’t have enough tradespeople to work on a roof without making it very expensive for you. Commercial buildings also tend to need more scaffolding to make it safe for the professionals to work, so some smaller roofing companies won’t offer commercial services. Make sure you check a company’s website or social media if you’re looking for commercial roofing – on the Quotatis Directory, our roofers will show whether they do commercial roofing to make your search easier.

Placholder Image

Other Top Projects in Aughnacloy

Are you a roofer in Aughnacloy?

We can help you get more Commercial roofing work and boost your business.

Join today