Building Work | Porch
Frinton-on-Sea - CO13
Enquiry from: Paul T
Start Date: Immediate
Replacement UPVC front door with frame.
Porches are progressively prominent in the UK for a number of reasons and normally function as a small area connected to the front of your home. They will either be confined with a windows and door, or open prepared; which is especially fantastic in the summer months.
As you would certainly anticipate there are a series of styles readily available to homeowners when it concerns the porch as well as a selection of products to match also. Without a doubt one of the most preferred are uPVC porches and wood porches.
A porch is a little and also reduced structure (with a roofing) located at the main entrance of a structure or home. It's typically without a home window (although more recent variants may include one) and can either be screened-in or enclosed to stop unwanted gain access to from pests as well as extremes in climate. Additionally, some residences may have a three-season porch or sun porch. This might be situated alongside the house and covered by the roof covering overhang - they're normally evaluated in to use good access throughout the year.
Usually, porches offer a wide variety of objectives. They consist of:
Make one of the most from what a porch can use your residence as well as compare quotes from local, vetted and also trustworthy experts to get the very best cost readily available in your location.
The typical cost of uPVC or wood porch is £4,250. Costs vary based upon the materials and the contractor chosen. The upper price range can be as high as £5,013. The material costs are in general approximately £875.
Avg. price low | Avg. price low |
---|---|
Avg. price | Avg. price |
Avg. price high | Avg. price high |
£5600
£4200
£2800
£1400
£0
Labour cost | £2,450 | |
Material cost | £875 | |
Waste removal | £175 |
Requests for quotations in Frinton-on-sea in October 2024
Requests for Upvc or wood porch quotations in Frinton-on-sea in October 2024. 0% change from September 2024.
Requests for Upvc or wood porch quotations in Essex in October 2024. 0% change from September 2024.
We noted 159 requests for home quotations within Frinton-on-sea. Of these quote requests the number of upvc or wood porch quotations within Frinton-on-sea was 0. Quotatis would have been able to match these consumers with as many as four suitable installers who were available for work in Frinton-on-sea at that time. Ask for a free home survey from reliable companies in Frinton-on-sea.
Source: Numbers calculated based on the search volumes in major search enginesFrinton-on-Sea is a tiny seaside community in the Tendring district of Essex, England. It is part of the parish of Frinton as well as Walton. A selecting ward in the name of Frinton exists. The population of this ward at the 2011 Census was 4,002. Frinton has three points of entry by road: an unadopted road from Walton-on-the-Naze in the north, a household road, and a CCTV kept track of level crossing beside the railway station which changed the older gated crossing in 2009. Frinton was as soon as geographically unique, yet real estate estates currently line the roads in between Frinton and Walton-on-the-Naze, Kirby Cross and Kirby-Le-Soken. The community has sandy and also stone beach washed daily, greater than a mile (1,600 m) long, with wardens in season, as well as an area of sea zoned for swimming, sailing as well as windsurfing. The coast is lined by a boardwalk with several hundred beach huts. Landward from the boardwalk is a lengthy greensward, prominent with young and also old alike, extending from the border with Walton-on-Naze to the golf club in the south.
Frinton-on-Sea - CO13
Enquiry from: Paul T
Start Date: Immediate
Replacement UPVC front door with frame.
Clacton-on-Sea - CO16
Enquiry from: Peter H
Start Date: Immediate
porch size 2.7 mtrs wide by 1.13 mars deep lean to with polycarbonate roof part glass and part upvc panels self fit are you the property owner: owner of the property do you have planning permission: ...
Colchester - CO2
Enquiry from: Gareth T
Start Date: Immediate
Wishing to build a front porch. Not sure which materials yet. Approximately 1.5 square metres at the front of the house.
Clacton-on-Sea - CO16
Enquiry from: Victor A
Start Date: Immediate
want a porch constructed outside are you the property owner: owner of the property do you have planning permission: no what material are you looking for: upvc what material would you like the roof mad...
Clacton-on-Sea - CO16
Enquiry from: Victor A
Start Date: Immediate
want a porch constructed outside are you the property owner: owner of the property do you have planning permission: no what material are you looking for: upvc what material would you like the roof mad...
Ipswich - IP9
Enquiry from: Peter G
Start Date: Immediate
Are you the home owner of that property? Yes Are you replacing an existing porch or is this a new build? Replacement What material do you require, UPVC? UPVC and brick What colour do you want it to be...
Ipswich - IP3
Enquiry from: Michael E
Start Date: Immediate
porch extension home owner open to material options supplied and fitted call to appoint
Answer a few quick questions, so we can match you with professionals who can help.
Get free, no-obligation quotes from 4 verified Builders working in Frinton-on-sea.
Compare customer reviews, services and prices, and choose the right professional for you.
Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.
Good easy way to find a selection of trades you need all in one place.
Love LeadsDoWork it's a big part of my Business I would recommend to anyone
Tiling a porch roof is a very important but laborious and difficult task. A project of this magnitude will require a large investment in planning and preparation way before the actual installation process takes place. It can be a brand new porch roofing tile or a replacement of the existing one, either way it’s crucial to get the right technique. If you lack proper training or experience in this field, we’d recommend you hire the services of a reliable professional probably within your local area to guarantee the best results and to save yourself some time and money. This guide will give you a good insight into the porch roof tiling process. Let’s have a look!
• With the crown looking upwards, put the first tile on the batten and centre the tile from side to side.
• Hammer a 10d nail at the base of the tile and into the batten (make sure not to overdrive the nail).
• To provide a much needed support, apply a little mortar under the first tile.
• Identify the inner end of the first tile and place another tile on top. Take a measurement from the outer end and adjust the end of the second tile to fit.
• Just like you’ve done with the first tile, nail the second tile into the batten.
• Position two tiles at the both ends of the ridge and proceed with the installation just as you’ve done with the previous tiles.
• Take a measurement of the distance across the ridge from the first tile’s outer end. Once done, you can then calculate the number of tiles required by subtracting 16 inches from your measurement and divide the answer by 8.
• Beginning at the second tile on one end of the ridge, install the half the number of ridge tiles towards the centre of the ridge. Now install the remaining tiles working from the opposite end to the ridge’s centre. At the centre of ridge should be a key tile with mortar.
A front porch is a glorious addition that would be a blessing to have in any home. It gives you a good floor space to enjoy your neighbourhood as well as your surroundings in the cool atmosphere of the outside living space. The question however is, how do you build a porch? Constructing the structure can be a very challenging task but with proper guidance and lots of practice, you can also be a skilled porch builder. To protect your investment, it’s advisable to hire the services of a professional for help with your porch especially if you lack proper training and experience. This way, you’ll get to save time and money. This guide is prepared to give you some insight into the porch building process.
lAssess Your Location
• Consider the location before proceeding with the project. It’s essential to select a location that’ll reduce the sunlight coming in.
lPlan The Materials Required For Your Porch
• You’ll have to decide the type of porch you’ll be going for. For example, your porch can be built out of wood, composite decking or if it’s going to utilize some stone flooring, brick or even tile.
lBuild Your Porch Foundation
• Dig the foundations deep to ensure stability while also putting in mind any pipework or cabling
• Fit a damp proof course
• Add the subfloor - this can be concrete or timber
lStart To Lay The Brick And Floor
• Lay the bricks evenly up to the DPC level
• Lay the floor
• Add the flooring protection
• Once done, you can lay the bricks to the window level
• You can fit in a window sill if required before proceeding the brick and block work until it reaches the roof timber’s height
• Fit the linter when you get to the top of where the window will reach.
lConstruct The Roof
• Build a timber framework
• Fit a breathable roof membrane
• Install the roof battens and lay the roof tiles.
• Add gutters
The simple answer to this question is... they can be! Although there are many types of porch designs that are available in the market, the uPVC porch happens to be one of the most loved and cost effective. Most home and property owners prefer the installation of a uPVC porch for a number of reasons. These includes:
• Value for money
It’s no coincidence the uPVC is widely accepted across the building industry with a plethora of uses. Not only is it relatively inexpensive to manufacture, but even the recycled uPVC is now becoming more and more useful. UPVC’s main rivals are wood and aluminium, and both are way more expensive to incorporate for frame profiles. Therefore, making use of uPVC is going to make your initial costs relatively low.
• Life Span
Although the main rivals in both hardwood and aluminium can also boast a lengthy lifespan just as uPVC. However, considering the price that you can get a uPVC, the lifespan is just incredible as it can be measured in decades.
• Aesthetic Appeal
UPVC gives you a wide range of foil colours that’ll fit your home perfectly well while also enhancing it’s visual appeal. You can actually get a porch that looks exactly like it’s manufactured from timber frames. To achieve this, all you need to do would be to make use of a wood grain surface finish. This is also long lasting, strong and resistant to fade.
• Little Maintenance
This is a very common feature of uPVC that makes it even more advantageous when used in making a porch. Unlike timber or wood which swells due to absorption of water or shrinks, you’ll never need to worry about all these distortions and more with uPVC. No painting, no sanding and ultimately, low maintenance required.
If you’ve decided to construct a porch to your property and now looking to figure out the cost required to complete the project, then you’re at the right place!
There are many factors that comes to play when determining the price of building a porch. These factors includes the size of the porch, the number of windows, the style of the roof as well as the type of the porch selected. Now let’s take a look at these factors one after the other.
• The Porch’s Size
As you would have correctly imagined, a large porch will definitely cost more money than a smaller one. A rough estimate of a porch’s cost per square metre is approximately £1,400.
• The Number Of Windows
Just like in the scenario above, the more the number of windows to be incorporated, the more money you’ll have to pay to complete your porch. A porch window will generally cost you within a range of £300 to £1,000
• The Style Of The Roof
There are two popular styles of porch’s roof which includes a tiled rood and a rubber flat roof. Generally, roof tiles are costlier than a rubber flat roof. A tiled roof would cost you between £0.80 to £1.80 per roof tile, while a rubber roofing will cost your between £70 to £90 per metre squared.
• Type Of The Porch
Another huge determinant of a porch’s price is type of material incorporated. For instance, if your preferred type is a lean-to, the price of a uPVC would be between £2,300 to £2,700. Meanwhile, a flat gable roof porch should cost within a range of £3,300 to £3,800.
Kindly note that the costs quoted in this article are only rough estimates, for a more accurate estimate you can contact a porch building professional within your local area.
We can help you get more Upvc or wood porch work and boost your business.
Join today