A garden shed is a great option to add extra storage space in your garden. Lock away your lawnmower, tools, outdoor toys and furniture so it doesn’t get weather damaged or stolen. But how do you build a shed? We’ll go through a brief guide on building a shed using a flat packed one. Plan your shed base You must have a sturdy base for your shed, otherwise the frame won’t stand properly and could stop the door from opening. Decide whether you’re going to have: A concrete base laid on hardcore Concrete slabs on sharp sand Treated wood beams on hardcore or shingle An interlocking plastic system All bases should be laid on firm, level ground as far as possible. Treat wood with preservative To help your shed last as long as possible, you should coat all the wooden parts with timber preservative before you put it together. Put the shed floor together Some will need more assembly than others, but you need to make sure that the floor panel is attached to the joists; follow the manufacturer’s instructions for the correct spacing. Put up the shed walls Mark the centre point of each wall on its bottom edge, then do the same for the shed floor so you can line them up together. Stand the gable end on the base and line it up. Check that it’s vertical with a spirit level – you might need someone to support the panel while you do this. Use a temporary holding batten to keep it in place. Fix a side panel to the gable end panel with countersunk screws, then add the second side panel in the same way. Don’t attach the panels to the floor until you’ve fitted your shed roof. Fit the roof If the shed comes with a support bar, put this in position before you put the roof panels in. Nail the roof panels in place, ensuring there’s a parallel and equal overlap at each end. Roll out some roofing felt from front to back, leaving a 50mm overlap at each side. Secure it with clout-headed felt tacks at 100mm intervals. Apply mastic sealant to the outside corners, then fix each corner trim with 30mm nails. Add the fascias and finials, predrilling 2mm holes to avoid splitting the wood. Nail them through the felt into the shed using 40mm nails. Add the shed windows Slide each windowsill into the tongue and groove cut out, then put the window cover strip in position, fixing it to the vertical framing. From inside the shed, put the glazing sheets into the window rebates, making sure the bottom edge of the glazing sheets sit on the outside of the sill. Fix the window beading on the top and sides with 25mm nails. Fix the walls to the floor Before you do anything, make sure you check that the centre marks on the walls line up with the marks on the shed floor. Then fix the wall panels to the floor with 50mm screws, aligning them with the joists. And that’s it! But if you’re not confident in building a shed yourself, there are plenty of professionals available who will be happy to help.

Garden Sheds in Pembroke Dock

Obtain Garden Sheds Prices in Pembroke Dock

Garden Sheds in Pembroke Dock

Garden sheds are an essential factor of any useful garden space. They provide storage for large garden tools, as well as for other tools. A large shed could even provide enough space for plant potting or a general workshop. Alternatively, a big shed could be used as an indoor seating area. Garden sheds are available in an enormous selection of sizes and can be specified to your precise requirements, providing you complete control over the amount and placement of windows, type, size and location of door, and design of roof. Garden sheds generally come in one of three materials. Wooden sheds are the traditional design and can be integrated well into any garden creating a natural look, particularly if the wood used for the shed is matched to adjacent fences. Wooden sheds are still very popular, although they will require maintenance by retreating or staining the wood to maintain the life of the shed. Garden sheds are also made of metal, which is very tough and therefore ideal for storage of tools and other equipment. Metal sheds additionally require almost no maintenance. The final material for garden sheds is plastic, which in modern examples is much more resilient than might be expected. When contemplating a garden shed, it's essential to make sure that you choose one which will fit in your garden space. Garden sheds will need to be sited on a level area, and will require a base to be built as a foundation. This base could be produced from either concrete, paving, gravel or a floating wooden base, but will need to be the right size for your shed and able to support the weight of your shed when loaded.

Average Garden shed cost in Pembroke Dock

The typical cost of Garden shed is £600. Costs vary based on the materials and the organisation selected. The upper price range can be as high as £690. The material costs are typically around £150

Average price per Garden shed job in 2025

Avg. price low	Avg. price low £475
Avg. price	Avg. price £1,050
Avg. price high	Avg. price high £1,595

£1700

£1275

£850

£425

£0

Prices based on actual Garden shed costs for Pembroke Dock, as reported by local LeadsDoWork members.

Garden shed installation cost in Pembroke Dock 2025

	Labour cost	£420
	Material cost	£150
	Waste removal	£30

Time frame: 1-2 days

Garden shed searches in January 2025

Choose your search type

No. of estimated projects Estimates by cities and towns

Garden shed Projects in Pembroke Dock in December 2024

590

Requests for quotations in Pembroke Dock in December 2024

0

Requests for Garden shed quotations in Pembroke Dock in December 2024. 0% change from November 2024.

0

Requests for Garden shed quotations in Dyfed in December 2024. 0% change from November 2024.

Source: Numbers calculated based on the search volumes in major search engines

Garden shed searches in cities and towns near Pembroke Dock December 2024

Garden shed near you

Choose locations

Towns and Cities near Pembroke Dock Other locations within Wales

Pembroke Dock

Pembroke Dock is a town and an area in Pembrokeshire, South West Wales, 3 miles (4.8 kilometres) northwest of Pembroke on the banks of the River Cleddau. Originally Paterchurch, a tiny angling village, Pembroke Dock town broadened swiftly adhering to the building of the Royal Navy Dockyard in 1814. The Cleddau Bridge web links Pembroke Dock with Neyland. After Haverfordwest and Milford Haven, Pembroke Dock is the third-largest community in Pembrokeshire.

Looking for Garden shed in Pembroke Dock?

Get free quotes from local carpenters

i need somewhere to work on my van, it'd a LWB hightop van would be handy if there is power, but not essential. i would need it for a max of 2, Days Regards Phillip...

Post a similar request >

Local & reliable carpenters near me

Tell us about your garden shed project

Answer a few quick questions, so we can match you with local carpenters who can help.

Find up to 4 carpenters in Pembroke Dock

Get free, no-obligation local garden shed quotes from 4 verified carpenters working in Pembroke Dock.

Hire with confidence

Compare customer reviews, services and prices, and choose the right tradesperson for you.

Our reviews

Average

Would highly recommend

Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.

Good easy way to find a selection of…

Good easy way to find a selection of trades you need all in one place.

Love LeadsDoWork it's a big part of my …

Love LeadsDoWork it's a big part of my Business I would recommend to anyone

FAQs

Yes, it is possible to insulate a shed. You might want to do this if you’re planning on working in it during the winter. A professional will be able to help you find an insulated shed or advise you on how to insulate a shed that you already have. Always seek professional advise first before attempting to do this yourself!

If you spend time in your shed, whether you use it as a summer house or an office, you’ll probably want a bit of insulation in there for when it starts to get chilly. There are different ways to insulate a shed, and some aren’t expensive at all. You just need to decide what the best way for you is. Bubble wrap If you don’t spend too much time in your shed, bubble wrap is an easy and cheap way to insulate your shed. Simply attach bubble wrap strips to the framing of the shed to create an air gap, then screw or nail a sheet of MDF over the top. Fibreglass wool Fibreglass wool is a good option if you want to insulate your shed further. Make sure you use safety equipment to protect your eyes, nose, mouth and hands when you’re handling it. Tack a breathable membrane to the inner walls of the shed, then place the fibreglass wool on top. Add a sheet of MDF or wood board, ensuring all the fibreglass is covered. Insulating shed windows and doors You'll often feel draughts through shed windows and doors, and these are easy to block up. You can use foam filler or liquid wool along the edges of the windows and gaps in the door frame. Let it dry out after you’ve applied it then cut off any excess. Insulate the floor If you’re building a new shed, you could fit some underfloor insulation to the grid of the shed base – it could help reduce up to 40% of heat lost through the shed floor. But if your shed’s already built, you can line the floor with a breathable membrane then lay a rug or piece of carpet down. The membrane underneath stops any damp or rot forming, so it’s best not to lay a rug straight down on the shed floor.

A garden shed is a great option to add extra storage space in your garden. Lock away your lawnmower, tools, outdoor toys and furniture so it doesn’t get weather damaged or stolen. But how do you build a shed? We’ll go through a brief guide on building a shed using a flat packed one.

Plan your shed base You must have a sturdy base for your shed, otherwise the frame won’t stand properly and could stop the door from opening. Decide whether you’re going to have:
- A concrete base laid on hardcore
- Concrete slabs on sharp sand
- Treated wood beams on hardcore or shingle
- An interlocking plastic system
All bases should be laid on firm, level ground as far as possible.
Treat wood with preservative To help your shed last as long as possible, you should coat all the wooden parts with timber preservative before you put it together.
Put the shed floor together Some will need more assembly than others, but you need to make sure that the floor panel is attached to the joists; follow the manufacturer’s instructions for the correct spacing.
Put up the shed walls
- Mark the centre point of each wall on its bottom edge, then do the same for the shed floor so you can line them up together.
- Stand the gable end on the base and line it up. Check that it’s vertical with a spirit level – you might need someone to support the panel while you do this. Use a temporary holding batten to keep it in place.
- Fix a side panel to the gable end panel with countersunk screws, then add the second side panel in the same way.
Don’t attach the panels to the floor until you’ve fitted your shed roof.
Fit the roof
- If the shed comes with a support bar, put this in position before you put the roof panels in.
- Nail the roof panels in place, ensuring there’s a parallel and equal overlap at each end.
- Roll out some roofing felt from front to back, leaving a 50mm overlap at each side. Secure it with clout-headed felt tacks at 100mm intervals.
- Apply mastic sealant to the outside corners, then fix each corner trim with 30mm nails.
- Add the fascias and finials, predrilling 2mm holes to avoid splitting the wood. Nail them through the felt into the shed using 40mm nails.
Add the shed windows
- Slide each windowsill into the tongue and groove cut out, then put the window cover strip in position, fixing it to the vertical framing.
- From inside the shed, put the glazing sheets into the window rebates, making sure the bottom edge of the glazing sheets sit on the outside of the sill.
- Fix the window beading on the top and sides with 25mm nails.
Fix the walls to the floor Before you do anything, make sure you check that the centre marks on the walls line up with the marks on the shed floor. Then fix the wall panels to the floor with 50mm screws, aligning them with the joists.

Yes, your shed does need a base. This is to give it a solid, level foundation. Open soil will not help with the longevity of the shed itself or the contents within. The best materials to use to make your shed base are concrete, natural stone or wood.

Other Top Projects in Pembroke Dock

Customer Reviews

Overall rating:

Pembroke Dock Garden shed installers are rated 4.2 out of 5 based on 1 reviews of 39 pros.

The LeadsDoWork rating and review is an overall rating based on verified reviews and feedback from the customers with Garden shed projects that have been connected with Garden shed pros to help them. All Garden shed contractors All Pembroke Dock Garden shed contractors

Need more help?

Safe removal of an asbestos garden shed in Galashiels Published: 02/12/2024 Expert removal and disposal of a small asbestos garden shed in Galashiels, ensuring safety and compliance with regulations. Read this article

Lawn care, shrub pruning, and shed maintenance in Bolton Published: 07/12/2024 Garden maintenance in Lostock, Bolton, including lawn care, weed clearance, shrub pruning, tree work, planting, and pond installation. Perfect for a small detached home garden. Read this article

Urgent re felting of a sloped shed roof in Fakenham Published: 04/12/2024 Professional re-felting of a sloped shed roof in Fakenham to stop water leakage and restore weatherproofing. Read this article

Are you a carpenter in Pembroke Dock?

We can help you get more garden shed work with our qualified job leads and boost your business.

Join today