- How to build a shed base out of paving slabs
- Mix sand and cement together to make mortar or use a pre-mixed one
- Use a trowel to lay mortar for 1 slab at a time on the sub-base and lift a damp-sided slab onto the mortar, using a piece of timber and club hammer to tap the slab into position carefully. Continue to lay the first row of slabs
- Make equally-sized spacers in all the joints in the slabs to ensure they’re the same size, checking it’s level as you go along
- Next lay slabs along the two adjacent outer edges, filling in the central area row by row
- Leave the mortar to set according to the instructions or for at least 48 hours before filling in the joints with mortar or paving grout
- Building a shed base from concrete
- Create a wooden frame around your shed base area (also called formwork) to stop the concrete from spreading
- Mix pre-mixed concrete with water or use 1 part cement to 5 parts ballast
- Wet the sub-base using a watering can with a rose on the end
- Pour the concrete onto the framed base starting in one corner
- Push the blade of a shovel up and down in the edges of the concrete to get rid of air bubbles
- Use a rake to spread the concrete, leaving it around 18mm higher than the top of the frame. Work in sections of around 1-1.m2
- Compact the concrete using a straight piece of timber that’s longer than the width of the base. Move the timber along the site, hitting it along at about half of its thickness at a time until the surface is evenly ridged
- Remove excess concrete and level the surface by sliding the timber back and forwards from the edge that you started. Fill in any depressions and repeat until even
- Run an edging trowel along the frame to round off exposed edges of the concrete and prevent chipping
- Cover the concrete with a plastic sheet raised on wooden supports to allow slow drying. Weigh it down with bricks
- Once the concrete is set, you can install your shed and remove the wooden frame with a crowbar
Dalwhinnie
Dalwhinnie is a small village in the Scottish Highlands. Dalwhinnie is located at the head of Glen Truim as well as the north-east end of Loch Ericht, on the western edge of the Cairngorms National Park. Dalwhinnie sits at an altitude of 351 m (1,152 ft). It is just one of the chilliest towns in the UK, having an average yearly temperature of 6.6 ° C (43.9 ° F), making it suitable for winter months strolling and also alpinism. It is north of Drumochter, simply off the A9 roadway from Perth to Inverness as well as has actually been bypassed given that 1975. It is about 75 miles (120 km) from both Edinburgh and also Glasgow, 25 miles (40 kilometres) from Aviemore, 13 miles (21 km) from Newtonmore and 17 miles (27 km) from Kingussie. Dalwhinnie railway station lies on the Highland Main Line from Perth to Inverness. The location is strolling destination along the River Truim as well as in Cairngorm and Monadhliath Mountains in the Cairngorm National Park. Dalwhinnie is on the Sustrans National Cycle Route No. 7, Glasgow to Inverness. There are several cycle routes in the location consisting of one alongside Loch Ericht.