How to felt a shed roof?

Whether you want to felt a new shed roof or you’re re-felting your existing shed roof, it’s simple when you know how. Read our quick guide to see how easy it is. Remove any existing fascia boards Remove the fascia boards and the old felt if you’re re-felting. Measure the shed roof Measure the roof, taking into account that you should leave around 50mm for overlaps at the eaves and 75mm at the gable ends. You’ll probably need 3 pieces of felt, but some smaller sheds only need 2. Apply felt to the roof Once you’ve cut the felt to size, apply the each piece to the roof, pulling it tight. Then nail along the length of the roof at 100mm intervals. For nails at the bottom edge, they can be wider – around 300mm. If you’re adding a piece of felt in the middle of the shed along the apex, fix it using adhesive, then nail it at the lower edge at 50mm intervals. Tidy up the overhangs Fold down the felt at each overhang and nail it securely. Cut a slit in the overhang at the apex using a pen knife, then fold that down and nail at 100mm intervals along the gable. If you like, you can add fascia boards to keep the shed looking neat. Use wood nails to secure them and then trim away any excess felt. That’s it. It sounds scary, but it won’t take you long to felt your shed roof as long as you follow instructions carefully.

A garden shed is a great option to add extra storage space in your garden. Lock away your lawnmower, tools, outdoor toys and furniture so it doesn’t get weather damaged or stolen. But how do you build a shed? We’ll go through a brief guide on building a shed using a flat packed one. Plan your shed base You must have a sturdy base for your shed, otherwise the frame won’t stand properly and could stop the door from opening. Decide whether you’re going to have: A concrete base laid on hardcore Concrete slabs on sharp sand Treated wood beams on hardcore or shingle An interlocking plastic system All bases should be laid on firm, level ground as far as possible. Treat wood with preservative To help your shed last as long as possible, you should coat all the wooden parts with timber preservative before you put it together. Put the shed floor together Some will need more assembly than others, but you need to make sure that the floor panel is attached to the joists; follow the manufacturer’s instructions for the correct spacing. Put up the shed walls Mark the centre point of each wall on its bottom edge, then do the same for the shed floor so you can line them up together. Stand the gable end on the base and line it up. Check that it’s vertical with a spirit level – you might need someone to support the panel while you do this. Use a temporary holding batten to keep it in place. Fix a side panel to the gable end panel with countersunk screws, then add the second side panel in the same way. Don’t attach the panels to the floor until you’ve fitted your shed roof. Fit the roof If the shed comes with a support bar, put this in position before you put the roof panels in. Nail the roof panels in place, ensuring there’s a parallel and equal overlap at each end. Roll out some roofing felt from front to back, leaving a 50mm overlap at each side. Secure it with clout-headed felt tacks at 100mm intervals. Apply mastic sealant to the outside corners, then fix each corner trim with 30mm nails. Add the fascias and finials, predrilling 2mm holes to avoid splitting the wood. Nail them through the felt into the shed using 40mm nails. Add the shed windows Slide each windowsill into the tongue and groove cut out, then put the window cover strip in position, fixing it to the vertical framing. From inside the shed, put the glazing sheets into the window rebates, making sure the bottom edge of the glazing sheets sit on the outside of the sill. Fix the window beading on the top and sides with 25mm nails. Fix the walls to the floor Before you do anything, make sure you check that the centre marks on the walls line up with the marks on the shed floor. Then fix the wall panels to the floor with 50mm screws, aligning them with the joists. And that’s it! But if you’re not confident in building a shed yourself, there are plenty of professionals available who will be happy to help.

Garden Sheds in Cottingham

Get Garden Sheds Prices in Cottingham

Garden Sheds in Cottingham

Garden sheds are a crucial aspect of any practical garden space. They offer storage for cumbersome garden tools, as well as for other equipment. A larger sized shed could even provide enough space for plant potting or a general workshop. Additionally, a substantial shed could be utilised as an indoor seating area. Garden sheds are available in a large array of sizes and can be specified to your precise requirements, giving you complete control over the number and placement of windows, type, size and location of door, and design of roof. Garden sheds usually are available in one of three materials. Wooden sheds are the traditional style and can be integrated well into any garden creating a natural look, especially if the wood used for the shed is matched to neighbouring fences. Wooden sheds remain extremely popular, although they will need maintenance by retreating or staining the wood to preserve the life of the shed. Garden sheds are also manufactured from metal, which is very resilient and therefore ideal for storage of tools and other equipment. Metal sheds additionally require almost no maintenance. The final material for garden sheds is plastic, which in modern examples is much more durable than might be expected. When contemplating a garden shed, it's crucial to ensure that you choose one that will fit in your garden space. Garden sheds should be placed on a flat area, and will require a base to be built as a foundation. This base could be made from either concrete, paving, gravel or a floating timber base, but will have to be the right size for your shed and capable of supporting the weight of your shed when loaded.

Average Garden shed cost in Cottingham

The typical cost of Garden shed is £600. Costs vary based on the materials and the organisation selected. The upper price range can be as high as £690. The material costs are typically around £150

Average price per Garden shed job in 2025

Avg. price low	Avg. price low £450
Avg. price	Avg. price £600
Avg. price high	Avg. price high £690

£800

£600

£400

£200

£0

Prices based on actual Garden shed costs for Cottingham, as reported by local LeadsDoWork members.

Garden shed installation cost in Cottingham 2025

	Labour cost	£420
	Material cost	£150
	Waste removal	£30

Time frame: 1-2 days

Garden shed searches in March 2025

Choose your search type

No. of estimated projects Estimates by cities and towns

Garden shed Projects in Cottingham in February 2025

539

Requests for quotations in Cottingham in February 2025

0

Requests for Garden shed quotations in Cottingham in February 2025. 0% change from January 2025.

0

Requests for Garden shed quotations in Humberside in February 2025. 0% change from January 2025.

Source: Numbers calculated based on the search volumes in major search engines

Garden shed searches in cities and towns near Cottingham February 2025

Garden shed near you

Choose locations

Towns and Cities near Cottingham Other locations within Yorkshire & Humber

Cottingham

Cottingham is a large village and civil parish in the East Riding of Yorkshire. It lies to the northwest of the city of Kingston upon Hull, and it is 4.5 miles from the city centre. Home to a population of 17164, according to the 2011 Census, Cottingham is believed to be among the biggest villages in England. Traditionally, Cottingham was identified mainly for its springs, which formed a riverlet through the village and drove a mill in the village. The extraction of water on a level that was hardly sustainable ever since the 1930s is thought to be the reason for the disappearance of the springs from the village. There are 2 primary shopping streets, Hallgate and King Street, in the village. They are located by the medieval church, the council offices, library and the civic hall. Every Thursday, the village holds a market on Market Green. These locations are all a part of a conservation area, as specified by the 1990 Planning Act. The village is likewise home to a variety of significant buildings. The University of Hull uses the village for one of its lodging dorms. This includes the Lawns, Thwaite Hall and Needler's Hall, both of which are buildings going back to the late 18th century that have actually been broadened to house the student population. Other major houses include Southwood Hall, Newgate House, Eastgate House and Westfield House. The majority of Cottingham's houses are characterised by Victorian balconies built in the 2nd half of the 19th century and interwar and postwar real estate. A several public houses are in Cottingham, consisting of the Blue Bell and the Duke of Cumberland on the market square. For all of your house upgrades, make sure to make use of reputable specialists in Cottingham to make sure of quality.

Looking for Garden shed in Cottingham?

Get free quotes from local carpenters

Are you the property owner: Owner Property Type: Detached Other Forms: 10085 Agreed to recieve quotes for selected products: Yes Please call to appoint

Post a similar request >

Local & reliable carpenters near me

Tell us about your garden shed project

Answer a few quick questions, so we can match you with local carpenters who can help.

Find up to 4 carpenters in Cottingham

Get free, no-obligation local garden shed quotes from 4 verified carpenters working in Cottingham.

Hire with confidence

Compare customer reviews, services and prices, and choose the right tradesperson for you.

Our reviews

Average

Would highly recommend

Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.

Good easy way to find a selection of…

Good easy way to find a selection of trades you need all in one place.

Love LeadsDoWork it's a big part of my …

Love LeadsDoWork it's a big part of my Business I would recommend to anyone

FAQs

Try to put your shed in open space, away from trees, bushes and other buildings. This will help to protect it from falling branches and sap. It will also mean that you can access all sides of the shed for repair and maintenance purposes. Make sure you take a look at garden shed planning rules before you pick a final spot for your shed.

Yes, it is possible to insulate a shed. You might want to do this if you’re planning on working in it during the winter. A professional will be able to help you find an insulated shed or advise you on how to insulate a shed that you already have. Always seek professional advise first before attempting to do this yourself!

Whether you want to felt a new shed roof or you’re re-felting your existing shed roof, it’s simple when you know how. Read our quick guide to see how easy it is.

Remove any existing fascia boards Remove the fascia boards and the old felt if you’re re-felting.
Measure the shed roof Measure the roof, taking into account that you should leave around 50mm for overlaps at the eaves and 75mm at the gable ends. You’ll probably need 3 pieces of felt, but some smaller sheds only need 2.
Apply felt to the roof Once you’ve cut the felt to size, apply the each piece to the roof, pulling it tight. Then nail along the length of the roof at 100mm intervals. For nails at the bottom edge, they can be wider – around 300mm. If you’re adding a piece of felt in the middle of the shed along the apex, fix it using adhesive, then nail it at the lower edge at 50mm intervals.
Tidy up the overhangs Fold down the felt at each overhang and nail it securely. Cut a slit in the overhang at the apex using a pen knife, then fold that down and nail at 100mm intervals along the gable. If you like, you can add fascia boards to keep the shed looking neat. Use wood nails to secure them and then trim away any excess felt.

That’s it. It sounds scary, but it won’t take you long to felt your shed roof as long as you follow instructions carefully.

A garden shed is a great option to add extra storage space in your garden. Lock away your lawnmower, tools, outdoor toys and furniture so it doesn’t get weather damaged or stolen. But how do you build a shed? We’ll go through a brief guide on building a shed using a flat packed one.

Plan your shed base You must have a sturdy base for your shed, otherwise the frame won’t stand properly and could stop the door from opening. Decide whether you’re going to have:
- A concrete base laid on hardcore
- Concrete slabs on sharp sand
- Treated wood beams on hardcore or shingle
- An interlocking plastic system
All bases should be laid on firm, level ground as far as possible.
Treat wood with preservative To help your shed last as long as possible, you should coat all the wooden parts with timber preservative before you put it together.
Put the shed floor together Some will need more assembly than others, but you need to make sure that the floor panel is attached to the joists; follow the manufacturer’s instructions for the correct spacing.
Put up the shed walls
- Mark the centre point of each wall on its bottom edge, then do the same for the shed floor so you can line them up together.
- Stand the gable end on the base and line it up. Check that it’s vertical with a spirit level – you might need someone to support the panel while you do this. Use a temporary holding batten to keep it in place.
- Fix a side panel to the gable end panel with countersunk screws, then add the second side panel in the same way.
Don’t attach the panels to the floor until you’ve fitted your shed roof.
Fit the roof
- If the shed comes with a support bar, put this in position before you put the roof panels in.
- Nail the roof panels in place, ensuring there’s a parallel and equal overlap at each end.
- Roll out some roofing felt from front to back, leaving a 50mm overlap at each side. Secure it with clout-headed felt tacks at 100mm intervals.
- Apply mastic sealant to the outside corners, then fix each corner trim with 30mm nails.
- Add the fascias and finials, predrilling 2mm holes to avoid splitting the wood. Nail them through the felt into the shed using 40mm nails.
Add the shed windows
- Slide each windowsill into the tongue and groove cut out, then put the window cover strip in position, fixing it to the vertical framing.
- From inside the shed, put the glazing sheets into the window rebates, making sure the bottom edge of the glazing sheets sit on the outside of the sill.
- Fix the window beading on the top and sides with 25mm nails.
Fix the walls to the floor Before you do anything, make sure you check that the centre marks on the walls line up with the marks on the shed floor. Then fix the wall panels to the floor with 50mm screws, aligning them with the joists.

Other Top Projects in Cottingham

Customer Reviews

Overall rating:

Cottingham Garden shed installers are rated 4.8 out of 5 based on 2 reviews of 22 pros.

The LeadsDoWork rating and review is an overall rating based on verified reviews and feedback from the customers with Garden shed projects that have been connected with Garden shed pros to help them. All Garden shed contractors All Cottingham Garden shed contractors

Are you a carpenter in Cottingham?

We can help you get more garden shed work with our qualified job leads and boost your business.

Join today