External wall insulation in Oban

External wall insulation Prices in Oban

Home > Insulation Projects > External wall insulation > Oban

External wall insulation in Oban

Are you searching for External wall insulation in Oban? Our network of installers can assist with your task. All of our Builder in Oban are checked so you can see local consumer reviews, when business was created, rankings, satisfaction as well as cost,  permitting you to make the best choice on who to work with. Let us take the headache out of finding approximately 4 experts for your External wall insulation job.

A wall surface does many points, only one of which is to hold the roof covering up. Since the 1970s the wall surface's function in keeping the heat in has actually ended up being significantly important.

Exterior wall surface insulation includes fixing a layer of insulation product to the wall surface, after that covering it with a special sort of render (plasterwork) or cladding. The surface can be smooth, distinctive, coloured, tiled, panelled, pebble-dashed, or do with brick slips.

 

Is External Wall Surface Insulation Worth doing?

There are a variety of concerns to be attended to before setting up external wall insulation, however the advantages are numerous, consisting of:

  • Lowering warmth loss as well as energy costs
  • Lowering draughts and increasing the feeling of comfort
  • It does not interfere with the house while being set up
  • It does not lower internal flooring location
  • It permits wall surfaces to add to thermal mass (the 'tea cosy' effect).
  • It improves weatherproofing and also audio resistance.
  • It raises the life of the wall surface.
  • It reduces condensation on interior walls.

 

Is Planning Authorization Needed for External Wall Insulation?

Whatever else outside wall surface insulation does, it will alter the outside look of the house. Most of the times that will imply acquiring planning approval prior to embarking on the job, so do consult your neighborhood authority from the start. For homes in Conservation Areas and also for noted buildings it is fairly feasible that permission will not loom.

Under Building Regulations, if 25 percent or even more of a wall surface is to be insulated externally, it is generally needed to bring the entire wall approximately current criteria-- which makes feeling in that, if you're going to most likely to the initiatives and expenditure of shielding on the surface, then you may also do it well. The thermal efficiency of the protected wall surface has to have a U value of no greater than 0.30.

 

How much will it cost?

Exterior wall surface insulation is costly however reliable. Including it as part of a larger job will decrease the price, plus it does not need to be done to the entire home; an appealing front altitude might be better to internal insulation, while much less attractive side and back elevations can be protected on the surface. But despite having the higher expense, the benefits external insulation provides over interior mean that it is difficult to negligence.

 

Common setup prices of solid wall insulation.

  • Exterior wall surface insulation: around ₤ 10,000.
  • Inner wall surface insulation: around ₤ 8,200.

* Based upon a normal 3-bedroom, semi-detached house in Great Britain.

 

We will provide approximately four External wall insulation pros in your area, that will certainly provide quotations for the job you want done. You'll receive a home visit from professionals in Oban that'll aid you to choose the right External wall insulation for your residence before carrying out the installment. Enter your postcode to start searching now.

Average External wall insulation cost in Oban

External wall insulation is expensive but effective. Adding it as part of a project can reduce costs. You don't need to do the whole house, maybe just the front. Typically costs are around £5000-£9000.

 

Average price per External wall insulation job in 2024

Avg. price low

Avg. price low
£6,000

Avg. price

Avg. price
£9,000

Avg. price high

Avg. price high
£15,000

£15500

£11625

£7750

£3875

£0

Prices based on actual External wall insulation costs for Oban, as reported by local LeadsDoWork members.

External wall insulation installation cost in Oban 2024

Labour cost £3,000
Material cost £5,500
Waste removal £500
Time frame: 2 - 3 Days

External wall insulation searches in November 2024

External wall insulation Projects in Oban in October 2024

877

Requests for quotations in Oban in October 2024

0

Requests for External wall insulation quotations in Oban in October 2024. 0% change from September 2024.

0

Requests for External wall insulation quotations in Argyll in October 2024. 0% change from September 2024.

Source: Numbers calculated based on the search volumes in major search engines

External wall insulation searches in cities and towns near Oban October 2024

Oban

Oban is a resort community within the Argyll and Bute council area of Scotland. In spite of its little size, it is the biggest town between Helensburgh and also Fort William. Throughout the tourist period, the community can play host to as much as 25,000 people. Oban inhabits a setup in the Firth of Lorn. The bay is a near ideal horseshoe, protected by the island of Kerrera; and also past Kerrera, the Isle of Mull. To the north is the long reduced island of Lismore as well as the mountains of Morvern as well as Ardgour. Laurinburg, North Carolina (USA) ended up being a sister city to Oban in 1993. The preliminary contract was between Scotland County, North Carolina, as well as Argyll & Bute Area Council. Complying with reorganisation in 1995, the arrangement was verified by Argyll & Bute Council in 1997. In 1997 Oban was likewise twinned with Gorey, Region Wexford, in Ireland. Also twinned with Sarajevo. The local culture is Gaelic. In 2011, 8.2% of the town's population over age 3 might speak Gaelic and also 11.3% had some facility in the language. [10] Oban is thought about the residence of the Royal National Mòd, since it was first held there in 1892, with 10 rivals on a Saturday mid-day. The community held the centenary Mod in 1992 (the year it became Royal) as well as in 2003 the 100th Mod, the two occasions attracting countless rivals and also visitors (the 100th Mod was later than the centenary due to the fact that it was not kept in the war years). The Mod is kept in Oban approximately every 6-- 8 years, and also has last been held in October 2015.

Looking for External wall insulation in Oban?

Get free quotes from local builders

Get free quotes

How it works

Tell us about your External wall insulation project

Answer a few quick questions, so we can match you with professionals who can help.

Find up to 4 Builders in Oban

Get free, no-obligation quotes from 4 verified Builders working in Oban.

Hire with confidence

Compare customer reviews, services and prices, and choose the right professional for you.

Our reviews

Average

Would highly recommend

Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.

Good easy way to find a selection of…

Good easy way to find a selection of trades you need all in one place.

Love LeadsDoWork it's a big part of my …

Love LeadsDoWork it's a big part of my Business I would recommend to anyone

FAQs

How to fit external insulation?

With the title of this blog, do not be deceived into thinking the purpose is to encourage you to install an external insulation by yourself. Even as a competent DIYer, it’s not advisable to buy a couple of materials and start slapping it into the wall hoping for the best outcome. External insulation is by no means a DIY job and without the proper training and experience, it can easily turn out disastrous resulting in loss of time, effort and money in such a valuable project. This blog, however, will give you a great insight on how the installation process works and help maximize knowledge ensuring you do not spend more than necessary.

External Insulation Installation

lRender Test

• This is done to ensure the existing render is good enough for insulation support.

• If positive, the insulation can be applied directly onto it.

• If negative, ensure removal of the old render before fitting the insulation.

lPipework Adjustment & Removal

• Remove all pipework prior to insulation fitting

• Install temporary downpipes to ensure water is not wasted and everything continue to function normally during the insulation fitting process.

lWindow Protection

• Protect the window with a protective layer or film.

lStarter Track Fitting

• Determine level you want the insulation to start (height).

• Fit the aluminium start track or carrier tray at the identified level.

lInsulation Boards Fitting

• Apply a layer of adhesive to the board and glue them to the wall in a staggered pattern.

• Cut to fit round all obstructions and windows.

• File off the edge of the board where necessary using a rasp upon successful fitting of the boards

lMechanical Fixing Inclusion

• Hammer around 10 fixings per square metre into the board.

• This is to secure the insulation boards.

lBeading Fitting

• Add corner beads and stop beads to ensure the insulation is secure and to prevent it from making contact with other materials.

lReinforcing Mesh & Render Addition

• Apply two layers of strengthening properties and between the two layers of render, include a fibre glass mesh.

lPrimer Application

• Paint on the primer

lFinal Render Application

• Choose your most preferred texture and colour as this will be the last coating of the installation process.

lPipework Re-installation

• Re-install all detached pipework at the start of the installation process.

Is external wall insulation safe?

With the numerous benefits that comes with the installation of an external wall insulation in a building, it’s also important to find out whether it’s also safe before proceeding to fit one in your home. Firstly, to ensure that external wall insulation systems are safe, they must be BBA approved, which means they’ve been subjected to a thorough testing by the British Board of Agrement and therefore, suitable for use in UK homes.

Given the fact that cladding materials have recently generated a lot of debate and negative press about how reliable some particular materials are, questions are being asked of the safety and reliability of external wall insulation. However we must clarify that, although external wall insulation can be classified under cladding, it is very different to rainscreen cladding - which caused the Grenfell fire tragedy.

External wall insulation is completely safe. However, when it comes to fire, the safety of your system depends largely on the insulation type in question. The safest type of insulation you can have installed is the Rockwool insulation boards which are rated as Euroclass A1 non-combustible. The board is specially designed in such a way that it contains fire - preventing it from reaching the other areas of the building. They also do not produce harmful emission or smoke when impacted by fire.

Meanwhile, the Wood Fibre, is also a great insulation which is known to char and not burn. Contrary to many beliefs, it actually burns slowly creating this charring effect which produces an oxygen barrier that helps reduce the spread of fire.

To make your system safer, you can also make use of Fibreglass Mesh for reinforcement. It helps to improve the strength of the tensile which promotes the security of the boards attached to the wall.

How good is external wall insulation?

External Wall Insulation (EWI) is the act of insulating a home by fitting insulation to the exterior parts of the building which in turn improves thermal performance, cuts energy consumption ( savings on energy bill) and also adds to the home’s visual appeal. The systems are built in multiple layers, with the insulation board offering a plethora of options with each being suitable to varying projects and their needs. Installing an external wall insulation comes with a variety of benefits, let’s have a look!

• Thermal Performance Improvement

With EWI, the thermal inertia of the walls are greatly enhanced while also restricting the loss of heat. Ultimately, this lowers heating costs, enhances the comfort of indoor thermal and also reduces CO2 pollution.

• Eliminates Noise Pollution

When the noise levels are high, it can have a bad impact on our overall well being. A great way to reduce the disturbances from the outside like traffic noise is by fitting an External Wall Installation system.

• More Comfortable Living Space

Do you know the damp in homes can contribute to respiratory problems? A properly insulated home will greatly limit the impact of condensation by combating the damp issues. As a result, you can always expect your house to be cosy and comfy irrespective of the season. A cooler summer and warmer spring is guaranteed with EWI.

• Enhances The Property’s Visual Appeal

Looking for an excuse to rejuvenate your home’s aesthetic appeal? Well, you can as well try out adding an EWI system. There are a plethora of unique colours and styles you can pick from to beautify your home effortlessly.

• Adds Value To Property

An insulated home will generally cost more than an uninsulated one at the time of resale. Potential home buyers are more interested in the acquisition of a home with an EWI system due to its various benefits - and a higher demand can only imply a higher price!

Do I need planning permission for external wall insulation?

If you want to install an external wall, it is only wise to consider whether or not a planning permission is required in order to avoid a hefty fine. In a great kudos to the government and a welcome relief to home and property owners, the installation of external wall insulation is seen as an “improvement to the house and not an “extension or an “enlargement. Ultimately, this implies that external wall insulation fitting is to be done under permitted development and a planning application may not be required. However, like many other regulations, there are also exceptions to this rule and the main one is if the activity changes the appearance of your property. Properties such as a listed building having tighter regulations may pose some issues. As a result, we’d advise you to consult your local authority to ensure that there’s no fast rule to this topic before commencement of the external wall insulation project.

At the moment, according to the Government Building Regulations, the surface of the entire wall is to be improved to existing standards if the area to be insulated exceeds 25 percent of the wall. In normal situations this is usually the typical case, however to prevent avoidable fines and other possible punishments, it is always best to reach to your local authority and check out the rules guiding external wall insulation in your constituency. Furthermore, since external wall insulation is not a task that’s recommended to be done by yourself, you can also ask the professional external wall insulation fitting company for the applying rules before proceeding. As a good professional, the company should have a better knowledge of the rules and regulation guiding its activities.

Placholder Image

Other Top Projects in Oban

Are you a builder in Oban?

We can help you get more External wall insulation work and boost your business.

Join today