Insulation | External Wall
Dumfries - DG2
Enquiry from: Graeme S
Start Date: Immediate




Insulation and possible re-roof of our W-12ft by L-15 ft conservatory. Normal pitch on roof. Thank you.
Are you looking for External wall insulation in Dumfriesshire? Our network of installers can assist with your job. All of our Builder in Dumfriesshire are examined so you can see local write-ups, when business was founded, ratings, approval and cost, allowing you to make the best decision on who to employ. Allow us take the trouble out of locating up to 4 pros for your External wall insulation task.
A wall does several points, just one of which is to hold the roofing up. Considering that the 1970s the wall's function in keeping the warmth in has become progressively vital.
External wall insulation entails dealing with a layer of insulation product to the wall, after that covering it with a unique kind of make (plasterwork) or cladding. The coating can be smooth, textured, colored, tiled, panelled, pebble-dashed, or completed with block slides.
Is External Wall Insulation Worth doing?
There are a number of problems to be resolved before setting up outside wall insulation, but the benefits are numerous, consisting of:
Is Planning Consent Required for External Wall Insulation?
Whatever else exterior wall insulation does, it will alter the outside look of the house. Most of the times that will certainly imply getting planning permission before taking on the job, so do check with your neighborhood authority from the start. For homes in Conservation Areas and also for listed buildings it is rather possible that permission will certainly not be forthcoming.
Under Building Regulations, if 25 per cent or more of a wall is to be shielded externally, it is commonly essential to bring the entire wall surface approximately present requirements-- that makes feeling because, if you're going to go to the efforts and also expenditure of insulating on the surface, then you may as well do it well. The thermal efficiency of the insulated wall has to have a U worth of no more than 0.30.
Just how much will it set you back?
External wall surface insulation is pricey but efficient. Including it as part of a bigger job will decrease the expense, plus it does not require to be done to the whole residence; an appealing front elevation might be preferable to inner insulation, while much less appealing side as well as rear altitudes can be protected externally. However despite the higher cost, the advantages exterior insulation supplies over inner mean that it is challenging to disregard.
Normal installation expenses of solid wall insulation.
* Based upon a typical 3-bedroom, semi-detached residence in Great Britain.
We will offer approximately 4 External wall insulation pros in your area, who will provide quotations for the job you want done. You'll obtain a home visit from experts in Dumfriesshire that'll help you to pick the ideal External wall insulation for your residence prior to carrying out the installation. Enter your postcode to begin looking now.
External wall insulation is expensive but effective. Adding it as part of a project can reduce costs. You don't need to do the whole house, maybe just the front. Typically costs are around £5000-£9000.
Avg. price low | Avg. price low |
---|---|
Avg. price | Avg. price |
Avg. price high | Avg. price high |
£15500
£11625
£7750
£3875
£0
Labour cost | £3,000 | |
Material cost | £5,500 | |
Waste removal | £500 |
Requests for quotations in Dumfriesshire in March 2025
Requests for External wall insulation quotations in Dumfriesshire in March 2025. 0% change from February 2025.
Requests for External wall insulation quotations in Scotland in March 2025. 0% change from February 2025.
Dumfries - DG2
Enquiry from: Graeme S
Start Date: Immediate
Insulation and possible re-roof of our W-12ft by L-15 ft conservatory. Normal pitch on roof. Thank you.
Moffat - DG10
Enquiry from: Malcolm M
Start Date: Immediate
we need cavity wall insulation in our external bungalow walls. property built in 1968. are you the property owner: owner of the property property type: detached how many bedrooms do you have: 3-4 bed...
Castle Douglas - DG7
Enquiry from: Ewen M
Start Date: Immediate
we need external insulation on the utility room and bathroom on our property are you the property owner: owner of the property property type: detached how many bedrooms do you have: 3-4 bedrooms prope...
Dumfries - DG2
Enquiry from: Maureen M
Start Date: Immediate
we have a glass roofed conservatory, would like to add panels to help with heat regulation are you the property owner: owner of the property property type: detached how many bedrooms do you have: 3-4 ...
Dumfries - DG2
Enquiry from: Kate D
Start Date: Immediate
Cavity wall insulation in kitchen extension Are you the property owner: Owner of the property Property Type: Detached Property Age: Pre 1900 How many bedrooms do you have: 1-2 Bedrooms Please call to...
Sanquhar - DG4
Enquiry from: Clayton B
Start Date: Immediate
Cavity wall insulation for 30m squared single storey extension wall. Are you the property owner: Owner of the property Property Type: Detached How many bedrooms do you have: 3-4 Property Age: Pre 1900...
Dumfries - DG1
Enquiry from: Thomas S
Start Date: Immediate
Roof insulation inside and tiled roof
Canonbie - DG14
Enquiry from: Peter S
Start Date: 1 to 3 months
Full roof inspection and quote for insulation Are you the property owner: Owner of the property Property Type: Commercial How many bedrooms do you have: 3-4 Bedrooms Property Age: 1970-2000 Time sca...
Dumfries - DG2
Enquiry from: Paul P
Start Date: Immediate
External wall insulation
Dumfries - DG2
Enquiry from: Caroline M
Start Date: Immediate
external wall insulation Are you the property owner: Owner of the property Property Type: Detached How many bedrooms do you have: 1-2 Bedrooms Property Age: Unknown Interested in quote for cavity wa...
Lockerbie - DG11
Enquiry from: K E
Start Date: Immediate
Customers own description of work to be carried out: External insulation of wall and rendering Supplied and fitted Please contact to appoint
Dumfries - DG2
Enquiry from: DAVID H
Start Date: 1 to 3 months
INSULATION OF CONSERVATORY INTERNAL ROOF BY EITHER PLASTER FINISH OR UVPC FINISH A VICTORION STYLE CONSERVARY 4.70 MTR X 3.30 MTR Are you the property owner: Owner of the property Property Type:...
Sanquhar - DG4
Enquiry from: William A
Start Date: Immediate
Home Owner Semi Detached External wall insulation Call to Appoint
Dumfries - DG1
Enquiry from: Cieran W
Start Date: Immediate
Cavity wall insulation on extension to building. Are you the property owner: Tenant (with permission) Property Type: Detached How many bedrooms do you have: 1-2 Property Age: Pre 1900 Are you in a con...
Dumfries - DG1
Enquiry from: R G
Start Date: Immediate
we want a main wall in our basement kitchen, looked at we need it damp proofed and sealed before we can install a new kitchen Homeowner Please contact to appoint
Answer a few quick questions, so we can match you with local builders who can help.
Get free, no-obligation local external wall insulation quotes from 4 verified builders working in Dumfriesshire.
Compare customer reviews, services and prices, and choose the right tradesperson for you.
Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.
Good easy way to find a selection of trades you need all in one place.
Love LeadsDoWork it's a big part of my Business I would recommend to anyone
If you want to install an external wall, it is only wise to consider whether or not a planning permission is required in order to avoid a hefty fine. In a great kudos to the government and a welcome relief to home and property owners, the installation of external wall insulation is seen as an “improvement to the house and not an “extension or an “enlargement. Ultimately, this implies that external wall insulation fitting is to be done under permitted development and a planning application may not be required. However, like many other regulations, there are also exceptions to this rule and the main one is if the activity changes the appearance of your property. Properties such as a listed building having tighter regulations may pose some issues. As a result, we’d advise you to consult your local authority to ensure that there’s no fast rule to this topic before commencement of the external wall insulation project.
At the moment, according to the Government Building Regulations, the surface of the entire wall is to be improved to existing standards if the area to be insulated exceeds 25 percent of the wall. In normal situations this is usually the typical case, however to prevent avoidable fines and other possible punishments, it is always best to reach to your local authority and check out the rules guiding external wall insulation in your constituency. Furthermore, since external wall insulation is not a task that’s recommended to be done by yourself, you can also ask the professional external wall insulation fitting company for the applying rules before proceeding. As a good professional, the company should have a better knowledge of the rules and regulation guiding its activities.
External Wall Insulation (EWI) is the act of insulating a home by fitting insulation to the exterior parts of the building which in turn improves thermal performance, cuts energy consumption ( savings on energy bill) and also adds to the home’s visual appeal. The systems are built in multiple layers, with the insulation board offering a plethora of options with each being suitable to varying projects and their needs. Installing an external wall insulation comes with a variety of benefits, let’s have a look!
• Thermal Performance Improvement
With EWI, the thermal inertia of the walls are greatly enhanced while also restricting the loss of heat. Ultimately, this lowers heating costs, enhances the comfort of indoor thermal and also reduces CO2 pollution.
• Eliminates Noise Pollution
When the noise levels are high, it can have a bad impact on our overall well being. A great way to reduce the disturbances from the outside like traffic noise is by fitting an External Wall Installation system.
• More Comfortable Living Space
Do you know the damp in homes can contribute to respiratory problems? A properly insulated home will greatly limit the impact of condensation by combating the damp issues. As a result, you can always expect your house to be cosy and comfy irrespective of the season. A cooler summer and warmer spring is guaranteed with EWI.
• Enhances The Property’s Visual Appeal
Looking for an excuse to rejuvenate your home’s aesthetic appeal? Well, you can as well try out adding an EWI system. There are a plethora of unique colours and styles you can pick from to beautify your home effortlessly.
• Adds Value To Property
An insulated home will generally cost more than an uninsulated one at the time of resale. Potential home buyers are more interested in the acquisition of a home with an EWI system due to its various benefits - and a higher demand can only imply a higher price!
With the title of this blog, do not be deceived into thinking the purpose is to encourage you to install an external insulation by yourself. Even as a competent DIYer, it’s not advisable to buy a couple of materials and start slapping it into the wall hoping for the best outcome. External insulation is by no means a DIY job and without the proper training and experience, it can easily turn out disastrous resulting in loss of time, effort and money in such a valuable project. This blog, however, will give you a great insight on how the installation process works and help maximize knowledge ensuring you do not spend more than necessary.
External Insulation Installation
lRender Test
• This is done to ensure the existing render is good enough for insulation support.
• If positive, the insulation can be applied directly onto it.
• If negative, ensure removal of the old render before fitting the insulation.
lPipework Adjustment & Removal
• Remove all pipework prior to insulation fitting
• Install temporary downpipes to ensure water is not wasted and everything continue to function normally during the insulation fitting process.
lWindow Protection
• Protect the window with a protective layer or film.
lStarter Track Fitting
• Determine level you want the insulation to start (height).
• Fit the aluminium start track or carrier tray at the identified level.
lInsulation Boards Fitting
• Apply a layer of adhesive to the board and glue them to the wall in a staggered pattern.
• Cut to fit round all obstructions and windows.
• File off the edge of the board where necessary using a rasp upon successful fitting of the boards
lMechanical Fixing Inclusion
• Hammer around 10 fixings per square metre into the board.
• This is to secure the insulation boards.
lBeading Fitting
• Add corner beads and stop beads to ensure the insulation is secure and to prevent it from making contact with other materials.
lReinforcing Mesh & Render Addition
• Apply two layers of strengthening properties and between the two layers of render, include a fibre glass mesh.
lPrimer Application
• Paint on the primer
lFinal Render Application
• Choose your most preferred texture and colour as this will be the last coating of the installation process.
lPipework Re-installation
• Re-install all detached pipework at the start of the installation process.
This is a very great opportunity to not only get free external wall insulation, but also cut down your energy bills depending on the type of property you live in. Generally, to enjoy free external wall insulation you must at least be part of the group receiving one of the benefits listed below and also depends on the amount of money you earn. The benefits include:
• Income based jobseeker’s allowance (JSA)
• Income support
• Income-related employment and support allowance (ESA)
• Tax credits
• Pension credit guarantee credit.
• Universal credit.
There are also other important factors that determines if you can have a free insulation fitted on your property. These includes the place you reside, the carbon level of your home and according to some suppliers, the level of beneficial impact the insulation will have on your home. In order to have a free external wall insulation installed, you must either be the owner of your home or at least obtain the go ahead from your landlord before any external wall insulation activity can be made.
Good news is, if you fit the aforementioned criteria and you’ve already installed an external wall insulation, you just may be entitled to receive a refund for the good job done. However, to really find out if you’re eligible, we’d recommend you get in touch with your supplier directly. Also, the Energy Saving Trust (EST) can direct you to some organizations who can assist you in the determination of your eligibility.
As a home and property owner living in England, you can also check out the Each Home Counts Advice Website which is committed to giving impartial energy efficiency advice.
At the end of the day, if it turns out you happen to be ineligible for a free external wall insulation, you can still go ahead to contact a professional installer for a help at a competitive price to enjoy the several benefits that comes with home insulation.
We can help you get more external wall insulation work with our qualified job leads and boost your business.
Join today