External wall insulation in Blairgowrie

External wall insulation Prices in Blairgowrie

Home > Insulation Projects > External wall insulation > Blairgowrie

External wall insulation in Blairgowrie

Are you seeking External wall insulation in Blairgowrie? Our network of installers can assist with your project. Every one of our Builder in Blairgowrie are checked so you can see local honest reviews, when the business was opened, rankings, satisfaction as well as cost,  enabling you to make the appropriate decision on who to work with. Let us take the trouble out of locating up to 4 experts for your External wall insulation task.

A wall does many points, only one of which is to hold the roof up. Considering that the 1970s the wall surface's duty in maintaining the warm in has actually ended up being progressively essential.

External wall surface insulation includes fixing a layer of insulation product to the wall, after that covering it with a special type of make (plasterwork) or cladding. The surface can be smooth, distinctive, coloured, tiled, panelled, pebble-dashed, or do with block slips.

 

Is External Wall Surface Insulation Well Worth doing?

There are a variety of issues to be dealt with before setting up outside wall surface insulation, but the benefits are numerous, including:

  • Decreasing heat loss as well as energy bills
  • Decreasing drafts and also boosting the sense of convenience
  • It does not interfere with the house while being installed
  • It does not decrease internal floor area
  • It enables wall surfaces to add to thermal mass (the 'tea cosy' effect).
  • It boosts weatherproofing as well as sound resistance.
  • It boosts the life of the wall surface.
  • It decreases condensation on internal wall surfaces.

 

Is Planning Approval Needed for External Wall Surface Insulation?

Whatever else outside wall insulation does, it will certainly change the exterior appearance of your home. Most of the times that will mean gaining planning consent prior to undertaking the work, so do check with your neighborhood authority from the beginning. For homes in Sanctuary and for listed buildings it is rather possible that approval will certainly not loom.

Under Building Regulations, if 25 percent or even more of a wall is to be insulated externally, it is normally essential to bring the whole wall surface approximately current criteria-- that makes feeling in that, if you're mosting likely to most likely to the efforts and also expenditure of protecting externally, after that you may also do it well. The thermal efficiency of the shielded wall should have a U value of no greater than 0.30.

 

How much will it cost?

External wall insulation is expensive yet reliable. Adding it as part of a bigger job will decrease the price, plus it does not require to be done to the entire home; an attractive front elevation may be preferable to inner insulation, while much less appealing side as well as back elevations can be insulated externally. Yet despite the higher expense, the advantages external insulation provides over interior mean that it is challenging to neglect.

 

Regular setup expenses of solid wall insulation.

  • Exterior wall insulation: around ₤ 10,000.
  • Interior wall surface insulation: around ₤ 8,200.

* Based upon a typical 3-bedroom, semi-detached residence in Great Britain.

 

We will supply up to four External wall insulation pros locally, who will use quotations for the job you desire done. You'll get a property visit from specialists in Blairgowrie that'll aid you to pick the appropriate External wall insulation for your home before performing the setup. Enter your postal code to begin browsing currently.

Average External wall insulation cost in Blairgowrie

External wall insulation is expensive but effective. Adding it as part of a project can reduce costs. You don't need to do the whole house, maybe just the front. Typically costs are around £5000-£9000.

 

Average price per External wall insulation job in 2025

Avg. price low

Avg. price low
£6,000

Avg. price

Avg. price
£9,000

Avg. price high

Avg. price high
£15,000

£15500

£11625

£7750

£3875

£0

Prices based on actual External wall insulation costs for Blairgowrie, as reported by local LeadsDoWork members.

External wall insulation installation cost in Blairgowrie 2025

Labour cost £3,000
Material cost £5,500
Waste removal £500
Time frame: 2 - 3 Days

External wall insulation searches in January 2025

External wall insulation Projects in Blairgowrie in December 2024

311

Requests for quotations in Blairgowrie in December 2024

0

Requests for External wall insulation quotations in Blairgowrie in December 2024. 0% change from November 2024.

0

Requests for External wall insulation quotations in Perthshire in December 2024. 0% change from November 2024.

Source: Numbers calculated based on the search volumes in major search engines

External wall insulation searches in cities and towns near Blairgowrie December 2024

Blairgowrie

Blairgowrie as well as Rattray is a twin burgh in Perth and Kinross, Scotland. Citizens describe the community as "Blair". Blairgowrie is the bigger of both former burghs which were united by an Act of Parliament in 1928 and rests on the southwest side of the River Ericht while Rattray is on the northeast side. Rattray asserts to be the older as well as definitely Old Rattray, the area round Rattray Kirk, goes back to the 12th century. New Rattray, the location along the Boat Brae as well as Balmoral Road days from 1777 when the River was covered by the Brig o' Blair. The town lies on the north side of Strathmore at the foot of the Grampian Mountains. The west limit is created by the Knockie, a round verdant hill, as well as Craighall Gorge on the Ericht. Blairgowrie and Rattray created over the centuries at the crossroads of several historic routes with web links from the community to Perth, Coupar Angus, Alyth and Braemar. The roads to Coupar Angus and also Braemar form part of General Wade's armed forces roadway from Perth to Fort George. The community's centrepiece is the Wellmeadow, a grassy triangle in the middle of community which holds normal markets and also outside enjoyment.

Looking for External wall insulation in Blairgowrie?

Get free quotes from local builders

Get free quotes

Similar Customer Enquiries for External wall insulation in Blairgowrie

17 Feb

Insulation | External Wall

Blairgowrie - PH10

Enquiry from: Jennifer D

Start Date: Immediate

our conservatory needs a new roof and double glazed windows. wooden frames of windows may need replaced too. are you the property owner: owner of the property property type: detached how many bedrooms...

Post a similar request >

29 Jul

Insulation | External Wall

Blairgowrie - PH13

Enquiry from: Patrick R

Start Date: Immediate

external wall insulation are you the property owner: owner of the property property type: detached property age: 1900-30 how many bedrooms do you have: 5+ bedrooms please call to appoint

Post a similar request >

13 Mar

Insulation | External Wall

Perth - PH1

Enquiry from: Allyn S

Start Date: Immediate

Conservatory roof insulation/ conversion

Post a similar request >

17 Sep

Insulation | External Wall

Perth - PH1

Enquiry from: Sam M

Start Date: Immediate

insulation and plasterboard on existing glass roof property type: detached

Post a similar request >

11 Feb

Insulation | External Wall

Perth - PH14

Enquiry from: Kirsty M

Start Date: Immediate

Hello, I am looking for quotes to insultate our conservarory which measures around 4.3 by 3.5metres please. Are you the property owner: Owner of the property Property Type: Detached How many bedroo...

Post a similar request >

Local & reliable builders near me

Tell us about your external wall insulation project

Answer a few quick questions, so we can match you with local builders who can help.

Find up to 4 builders in Blairgowrie

Get free, no-obligation local external wall insulation quotes from 4 verified builders working in Blairgowrie.

Hire with confidence

Compare customer reviews, services and prices, and choose the right tradesperson for you.

Our reviews

Average

Would highly recommend

Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.

Good easy way to find a selection of…

Good easy way to find a selection of trades you need all in one place.

Love LeadsDoWork it's a big part of my …

Love LeadsDoWork it's a big part of my Business I would recommend to anyone

FAQs

Does external wall insulation add value to your home?

The answer is yes! Houses whose external walls have been insulated are more valuable than their uninsulated counterparts. And not only does it add to the value of a home, but also significantly reduces the amount of electricity consumption. This is a major turn on for potential investors which implies a greater demand and ultimately, a higher price. The real estate market is a very dynamic one which can be hard to predict at any particular time. The frequent changes in price are usually down to factors beyond the owners’ control, but if you’re looking to put up your house for sale in the near future, it would be a wise decision to consider ways in which you can increase its value. While renovating each room can be on the expensive side, a great solution would be insulate the external walls.

An insulated house is one that is well secured against the harmful impact of extremely high or low temperature, humidity and other atmospheric factors. Hence, the reason why a house with external wall insulation has a greater value which you would not want to miss out on. What’s more? You’ll get a great thermal insulation with the top notch materials like foamed polystyrene, high quality renders, mineral wool or polyurethane.

With an external wall insulation, you know the transaction will always be favourable on both ends. You get to smile to the bank, while the buyer also gets to enjoy great value for every penny spent. To employ the services of a reliable external wall insulation expert, simply conduct an in depth research from family and friends, online and other sources. Go through their online reviews and ask questions to become more familiar with the process and its value-adding potentials.

Will external wall insulation stop condensation?

Damp issues on a property are usually generated by a lot of factors such as a poor or broken guttering, condensation and lots more. The question arising here is what is the possibility of External Wall Insulation (EWI) preventing condensation? Not only is EWI a reliable way to reduce condensation-caused damp, but it’s also one of the major reasons property owners in solid wall homes consider thermally rendering or cladding their external walls.

Condensation arises as a result of warm moist internal air hitting a cold surface such as the steaming up of both windows and mirror when having a shower. What happens here is the condensation of the water vapour in the air from a gas to liquid in the process of touching the cold surface - one whose temperature is significantly reduced to reach the dew point. At the dew point, condensation is very rampant, and to tackle this issue you’ll have to heighten the wall temperature in order to convert the moisture to vapour and permit it to pass through the wall. And that’s exactly the job of an external wall insulation!

To get started you must ensure that the walls are clean and dry prior to fitting the external wall insulation. The month of May through to September when the weather tends to be dry and more stable are usually the best period to carry out the project. The external wall insulation will function just like a cosy blanket around the building. Ultimately, changing the feel and temperature of the inside of your home. As a result, the previously cold walls will no longer be cold which goes a long way to mitigate the effects of condensation. Furthermore, when an EWI is installed, the rooms of your home will automatically trap more thermal mass as the heat is saved in the walls’ fabric and released back when the temperature drops.

How to get free external wall insulation?

This is a very great opportunity to not only get free external wall insulation, but also cut down your energy bills depending on the type of property you live in. Generally, to enjoy free external wall insulation you must at least be part of the group receiving one of the benefits listed below and also depends on the amount of money you earn. The benefits include:

• Income based jobseeker’s allowance (JSA)

• Income support

• Income-related employment and support allowance (ESA)

• Tax credits

• Pension credit guarantee credit.

• Universal credit.

There are also other important factors that determines if you can have a free insulation fitted on your property. These includes the place you reside, the carbon level of your home and according to some suppliers, the level of beneficial impact the insulation will have on your home. In order to have a free external wall insulation installed, you must either be the owner of your home or at least obtain the go ahead from your landlord before any external wall insulation activity can be made.

Good news is, if you fit the aforementioned criteria and you’ve already installed an external wall insulation, you just may be entitled to receive a refund for the good job done. However, to really find out if you’re eligible, we’d recommend you get in touch with your supplier directly. Also, the Energy Saving Trust (EST) can direct you to some organizations who can assist you in the determination of your eligibility.

As a home and property owner living in England, you can also check out the Each Home Counts Advice Website which is committed to giving impartial energy efficiency advice.

At the end of the day, if it turns out you happen to be ineligible for a free external wall insulation, you can still go ahead to contact a professional installer for a help at a competitive price to enjoy the several benefits that comes with home insulation.

How to fit external insulation?

With the title of this blog, do not be deceived into thinking the purpose is to encourage you to install an external insulation by yourself. Even as a competent DIYer, it’s not advisable to buy a couple of materials and start slapping it into the wall hoping for the best outcome. External insulation is by no means a DIY job and without the proper training and experience, it can easily turn out disastrous resulting in loss of time, effort and money in such a valuable project. This blog, however, will give you a great insight on how the installation process works and help maximize knowledge ensuring you do not spend more than necessary.

External Insulation Installation

lRender Test

• This is done to ensure the existing render is good enough for insulation support.

• If positive, the insulation can be applied directly onto it.

• If negative, ensure removal of the old render before fitting the insulation.

lPipework Adjustment & Removal

• Remove all pipework prior to insulation fitting

• Install temporary downpipes to ensure water is not wasted and everything continue to function normally during the insulation fitting process.

lWindow Protection

• Protect the window with a protective layer or film.

lStarter Track Fitting

• Determine level you want the insulation to start (height).

• Fit the aluminium start track or carrier tray at the identified level.

lInsulation Boards Fitting

• Apply a layer of adhesive to the board and glue them to the wall in a staggered pattern.

• Cut to fit round all obstructions and windows.

• File off the edge of the board where necessary using a rasp upon successful fitting of the boards

lMechanical Fixing Inclusion

• Hammer around 10 fixings per square metre into the board.

• This is to secure the insulation boards.

lBeading Fitting

• Add corner beads and stop beads to ensure the insulation is secure and to prevent it from making contact with other materials.

lReinforcing Mesh & Render Addition

• Apply two layers of strengthening properties and between the two layers of render, include a fibre glass mesh.

lPrimer Application

• Paint on the primer

lFinal Render Application

• Choose your most preferred texture and colour as this will be the last coating of the installation process.

lPipework Re-installation

• Re-install all detached pipework at the start of the installation process.

Placholder Image

Other Top Projects in Blairgowrie

Customer Reviews

Overall rating:


Blairgowrie External wall insulation installers are rated 5 out of 5 based on 1 reviews of 4 pros.
The LeadsDoWork rating and review is an overall rating based on verified reviews and feedback from the customers with External wall insulation projects that have been connected with External wall insulation pros to help them. All External wall insulation contractors All Blairgowrie External wall insulation contractors

Are you a builder in Blairgowrie?

We can help you get more external wall insulation work with our qualified job leads and boost your business.

Join today