Composite Doors in Corbridge

If you’re going through new constructions or renovations and looking to change your old front door and install a brand new composite door, then you’re at the right place. Composite door fitting can be a DIY project but it’s essential to have the necessary training and experience before commencement. If not, we’d recommend you hire the services of a reliable professional to guarantee the best results and save yourself some time and money.Here, we’ll give a good insight into the composite door fitting process.

To get started, here are some of the tools that may be required - tape measure, hammer, stanley knife, crowbar, chisel, saw. Silicone sealant gun, spirit levels, electric drill ( including the hammer section), rubber mallet and 6mm socket spanner.

lPreparation

• Remove the existing door by rounding up the door frame firstly with a knife to reduce the possible damage to the wall.

• Cut through the door jambs.

• Remove each in two separate sections.

• Ensure the opening is level without any screws, mastic and filler.

lAlign Your Composite Door

• Ensure the sill of the door is level and flat.

• Make sure the frame is square and plumb in both planes.

• Bridge the cavity of the wall and cover the DPC

• Ensure that the frame is square. If not, your composite door won’t function as it should.

lInstall Your Composite Door

• Place the door in the frame.

• Hold the frame firmly in position with wedge packers

• Make sure the packers are positioned close to where the fixing will be placed.

• Make sure the jams are square and plumb in all planes by using a long spirit level.

• Secure the frame to the brickwork with the use of a drill.

• Place the fixings at the top and bottom of each hinge as well as each of the lock keep.

• Top fixings should be fitted 150mm and 250mm from each corner.

More often than not, when we think about replacing our old or existing door with a new unit, we tend to get a bit creative. We think about the panel to use, but often forget about the door’s frame which is just as important. The frame is way beyond an ordinary trimming that serves as a boundary for the slabs, it also ensures the door opens with ease and also sees that heat are being locked in and security is tight. There are a variety of frame options available when fitting a new door, and putting a composite door in a uPVC frame is one. In this article, we’ll give you an idea of the great effects of composite door and uPVC frame combination and help you make informed decision about the best setup that’ll perfectly satisfy all your doorway needs and budget.

Putting a composite door in a uPVC frame or a uPVC door in a composite frame is without a doubt the most popular door/frame combinations. In fact, you’d be shocked just how well a composite door and uPVC frame complements and supports each other in either alteration. If you’re the type that likes the unmatched levels of insulation, visual appeal as well as security that’s provided by composite doors, fitting this in a UPVC frame is really one that’ll set you apart. This combination is the most loved and for a good reason. You’ll get to open your door with ease while it also remains weathertight, save some money using the usually less costly uPVC frames and ultimately, combine the strengths of both materials incorporated. What’s more? It’s an opportunity for you to make a striking impression on all your visitors.

When it comes to the installation of an external door in your home or property, you’ll be indulged with a plethora of styles and options available in the market today. But as you would have imagined, not all of these options and styles are created equal. Not all can match the security and quality standards of a composite door. A door’s quality is greatly influenced by a wide variety of factors such as the materials incorporated as well as the overall design. For instance, going for a door made with low quality materials can as well be synonymous with leaving your door open while going out.

Composite doors are modern type of door used in homes in recent times. They’ve been design to combat the common flaws identified in singular material doors. The door puts together a perfect mix of materials which have been singled out due to their beneficial properties and effectively taps out the “old flaws. Composite doors are known to be highly resistant to weather conditions, no matter how extreme and unlike singular material doors, it does not react quickly to seasonal changes. And as a result of the insulating foam core of composite doors, they possess a higher thermal resistance than wooden doors.

Generally, a composite door is designed in such a way that makes it look as a wooden door featuring a very alluring wood grain. With the exceptional quality of the materials incorporated, the colours won’t fade, no discolouration will take place and ultimately, it doesn’t require much more than wiping with a damp cloth when it’s dirty as maintenance activity. In conclusion, composite doors are greatly designed modern doors which are manufactured using various materials. The premium quality provided by composite doors is unrivalled in the door industry.

Composite doors have coloured skins rather than a coloured coating on their surface. This means that their colour is long-lasting and they don’t need repainting. If you want to change the colour of your composite door it’s best to ask the manufacturer about the best way to do this. This is because different composite doors are finished in different ways.