Bifold Doors in Taunton

How To Install Bifold Doors

If you’re looking to install a bifold door in your home or property, then you’re at the right place! In reality some jobs are better left to the professionals and one of such jobs is bifold door installation especially if you lack proper training and experience that’ll guarantee the best result the first time. If otherwise, hiring a professional installer will do you lots of good like saving you time and extra money that could result from costly errors. In this step by step guide, we’ll take you through the bifold doors installation process.

The first step to take when it comes to bifold door installation is to take the measurement of the door opening and get a kit in the appropriate size. For a better accuracy, do note that the combined measurement of both doors should be about an inch less than the opening’s total width while also being two inches less than the door frame’s height.

• Install the top rails in such a way that the rail’s end makes contact with the door frame’s side using the screws.

• Fit the bottom rail in the same fashion as the top ensuring the rail’s end makes contact with the same side of the door frame.

• Insert dowels into the predrilled holes in the door panels’ top.

• Place the dowel with the adjustment screw near the bottom’s side wall. While placing the fixed dowels in the door panel’s top and bottom on the side farthest away from the hinge. Once done, put the dowel and spring assembly into the door panel’s top, closest to the side wall.

• Fit the door panels into rail’s top and bottom while also adjusting the screws to centre the doors.

• Ensure the doors open and close like they should. If positive, tighten all hardware and fit the pulls or knobs of the door.

What Is The Smallest Opening For Bifold Doors?

Generally, bifold doors comes in a wide range of sizes and configurations. So if you’re looking to install them in your home, the opening size required will depend on multiple influencing factors. However, the question we’re going to look at here is the smallest opening for bifold doors.

First and foremost, let’s consider the size of bifold doors as learning about how big or small bifold doors can play a key role in helping you determine the size of bifold door you’ll need. Generally, the size of bifold doors will vary largely depending on the manufacturer, but they are usually within the range of 6.8 feet and 7 feet in height. The width, however, will be determined by the number of door panels you’d like to use but several configurations are designed in such a way that they can be installed in openings of about 1.8m and above. For each door panel, the size are usually between 500 and 1000mm in width. As a result, if you decide to opt for door panels with a width of 700mm, you’ll need to get about 3 of the door panels in order to install in an aperture that’s wider than 1.8m. What’s more? Door panels can also be custom made especially if the size you need isn’t available.

So with that in mind, what’s the smallest opening for bifold doors? The bifold door’s minimum width is 1400mm. And in order to install a bifold door to fill this size, you’ll require two individual door panels that’s 700mm in width. Building them any smaller than the minimum width will be unwise as this will make them bind when closing.

Bifold doors can be made to measure to suit a huge range of properties. There are minimum and maximum sizes for door leaves. These dimensions vary between manufacturers. Different configurations of bifold door are suitable for different size openings.

How Do Bifold Doors Work

Generally, bifold doors are modern styled doors that are able to create a grand entrance and catch any visitor’s attention almost immediately. Unlike the conventional sliding doors, they are way more practical and convenient which makes it an awe-inspiring home addition. However, with the design being relatively new when compared to its counterpart - the sliding doors, not everyone knows about how they work. Therefore, it’ll only make sense to discover more about this door design before deciding on its utility. So how does a bifold door work?

The bifold door ( both interior and exterior types) operates on a built in tracking system that runs along the glass panels and connected on a train. In other words, the doors fold in and then slowly and smoothly glides over the laid out track which is backed by a chain of wheels or a tracking system. This function is carried out in a smooth and quiet manner, irrespective of the medium of movement.

Now talking of the bifold structures, they mostly come in pairs especially the interior designs. The design can either be in form of two doors that can be folded to one side or four individual panels that can be opened from the centre while some of the doors will fold on each side. Typically, the tracking will feature these units as well as the other important fittings, and also open inwards or outwards.

One of the significant qualities of these doors making them a popular option amongst homeowners nowadays is the flexibility and versatility of these units as well as their effectiveness when it comes to saving space. You’d be surprised to know that some of these bifold door designs can feature up to 7 panels which are linked via hinges and connected to the top or bottom of the roller track.