Bifold Doors in Ayrshire

How To Install Bifold Doors

If you’re looking to install a bifold door in your home or property, then you’re at the right place! In reality some jobs are better left to the professionals and one of such jobs is bifold door installation especially if you lack proper training and experience that’ll guarantee the best result the first time. If otherwise, hiring a professional installer will do you lots of good like saving you time and extra money that could result from costly errors. In this step by step guide, we’ll take you through the bifold doors installation process.

The first step to take when it comes to bifold door installation is to take the measurement of the door opening and get a kit in the appropriate size. For a better accuracy, do note that the combined measurement of both doors should be about an inch less than the opening’s total width while also being two inches less than the door frame’s height.

• Install the top rails in such a way that the rail’s end makes contact with the door frame’s side using the screws.

• Fit the bottom rail in the same fashion as the top ensuring the rail’s end makes contact with the same side of the door frame.

• Insert dowels into the predrilled holes in the door panels’ top.

• Place the dowel with the adjustment screw near the bottom’s side wall. While placing the fixed dowels in the door panel’s top and bottom on the side farthest away from the hinge. Once done, put the dowel and spring assembly into the door panel’s top, closest to the side wall.

• Fit the door panels into rail’s top and bottom while also adjusting the screws to centre the doors.

• Ensure the doors open and close like they should. If positive, tighten all hardware and fit the pulls or knobs of the door.

Bifold doors can be made to measure to suit a huge range of properties. There are minimum and maximum sizes for door leaves. These dimensions vary between manufacturers. Different configurations of bifold door are suitable for different size openings.

How Long Do Bifold Doors Last?

Are you ready to make the bifold doors investment decision? There’s one thing that might you may be hesitant about - how long do bifold doors last? Well, if this is the case then you’re not alone as this happens to be one of the most frequently asked question on bifold doors by potential investors. However the lifespan of bifold doors is based on a number of influencing factors such as the manufacturer of the door, the materials used in making the bifold door as well as how properly maintained it is.

There are several types of materials which can be used in making bifold doors. These includes aluminium, uPVC as well as wood. Amongst all the options, aluminium happens to be an incredibly robust material and when produced, it can have a lifespan of about 30 to 50 years on a property with good maintenance. Aluminium boasts a perfect blend of strength and malleability which happens to be a lot less likely to warp, expand or rot when compared to wood ( timber) or uPVC bifold doors. As a result, the life expectancy an aluminium bifold doors is expected to have is up to 45 years which is considerably larger than that of the uPVC at 25 to 35 years. What’s more? Aluminium framing is designed to last a long period while also being largely resistant to corrosion because aluminium does not rust as a result of the oxide layer on its surface. The function of the oxide layer is to protect the underlying metal while also being resistant to corrosion. As a result, the aluminium door is adequately protected from rain as well as acidity which are especially more present in the coaster regions.

It must be noted that the bifold doors only require minimal maintenance, however this is quite significant in ensuring the door lasts long.

How Do Bifold Doors Work

Generally, bifold doors are modern styled doors that are able to create a grand entrance and catch any visitor’s attention almost immediately. Unlike the conventional sliding doors, they are way more practical and convenient which makes it an awe-inspiring home addition. However, with the design being relatively new when compared to its counterpart - the sliding doors, not everyone knows about how they work. Therefore, it’ll only make sense to discover more about this door design before deciding on its utility. So how does a bifold door work?

The bifold door ( both interior and exterior types) operates on a built in tracking system that runs along the glass panels and connected on a train. In other words, the doors fold in and then slowly and smoothly glides over the laid out track which is backed by a chain of wheels or a tracking system. This function is carried out in a smooth and quiet manner, irrespective of the medium of movement.

Now talking of the bifold structures, they mostly come in pairs especially the interior designs. The design can either be in form of two doors that can be folded to one side or four individual panels that can be opened from the centre while some of the doors will fold on each side. Typically, the tracking will feature these units as well as the other important fittings, and also open inwards or outwards.

One of the significant qualities of these doors making them a popular option amongst homeowners nowadays is the flexibility and versatility of these units as well as their effectiveness when it comes to saving space. You’d be surprised to know that some of these bifold door designs can feature up to 7 panels which are linked via hinges and connected to the top or bottom of the roller track.