Artex is a material that is used for for surface decorating inside the inside of homes. It is commonly used to apply a textured surface to ceilings. Artex remains fashionable as another option to smooth plaster ceilings, and a highly skilled painter and decorator should be able to apply artex in numerous different textured design finishes. Artex relates to a particular brand name, but there are alternative manufacturers who create similar products. Older artex ceilings may be refurbished as well, with various products and applicators available in order to make this task as easy as possible. There exists a wide array of of different alternatives with regard to the designs of texture which artex can be applied in. It can be applied in stipple, swirl, or shell effects, all of which may be performed as a Do It Yourself task relatively easily. Experienced painters and decorators can discuss with you which texture would best suit your space, and ensure that artex is put on to create a high quality and consistent surface. Artex may even be painted over, and opting for a shade which goes with the texture of the surface can restore an old ceiling and breathe life into a space.
How much your artexing project might cost depends on how big the area is, how accessible it is and your location. Different professionals charge different amounts, and may spend varying amounts of time doing the work. However, the typical cost for an artexing project in the UK is about £200.
| Avg. price low | Avg. price low |
|---|---|
| Avg. price | Avg. price |
| Avg. price high | Avg. price high |
£400
£300
£200
£100
£0
| Labour cost | £140 | |
| Material cost | £50 | |
| Waste removal | £10 |
Requests for quotations in Whitstable in October 2024
Requests for Artexing quotations in Whitstable in October 2024. 0% change from September 2024.
Requests for Artexing quotations in Kent in October 2024. 0% change from September 2024.
Whitstable is a town within northern Kent, situated on the coast, only 8 kilometres from the City of Canterbury. It is a popular tourist attraction, made famous for its oysters and features an overall total populace of 30,195. For all home improvements you need in Whitstable, review quotations from respected tradesmen within Kent and get the ideal price for all work you would like done.
Whitstable - CT5
Enquiry from: Nick S
Start Date: Immediate
Artex ceilings in (measured in metres) living room/dining room 7.54 x 3.43 bedroom 1 4.06 x 2.49 bedroom 23.58 x 2.54 bedroom 3 3.73 x 2.36 bathroom (approx 2 x 2) kitchen 2.92 x 2.57 shower ro...
Herne Bay - CT6
Enquiry from: Sam A
Start Date: Immediate
Artexing 12ft x 8ft
Faversham - ME13
Enquiry from: Roy J
Start Date: Immediate
Artex kitchen ceiling size length 427cms. X 277cms wide
Sheerness - ME12
Enquiry from: Jan B
Start Date: 1 to 3 months
Home owner Customers description : small bathroom ceiling 1-3 months Please contact to appoint *
Answer a few quick questions, so we can match you with professionals who can help.
Get free, no-obligation quotes from 4 verified Plasterers working in Whitstable.
Compare customer reviews, services and prices, and choose the right professional for you.
Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.
Good easy way to find a selection of trades you need all in one place.
Love LeadsDoWork it's a big part of my Business I would recommend to anyone
Artex was originally made using white asbestos to make it stronger. However, this stopped in the mid-1980s, and the use of asbestos was banned in the UK in 1999, due to its extreme health risks. So, any artex you buy today won’t contain asbestos.
If you have an artex ceiling or wall that was created before 1999, it may have asbestos in it. This won’t be a health hazard if you leave it undisturbed, so it’s not necessary to remove it. However, if you want to get rid of or alter your artex ceiling or wall, you must get it tested to check if it has asbestos in or not first. If it does, you’ll need to hire a qualified professional to work on it.
It’s possible to paint your artex ceiling if you want to smarten it up or make it a different colour.
If it’s never been painted before, you’ll need to paint it with a PVA-based solution or water-thinned paint layer to start with. You may want to scrape or sand off any loose or peeling patches beforehand, but only do this if you’re sure that the artex doesn’t contain any asbestos.
Once you’ve done this, follow with two coats of your paint of choice – ideally an emulsion. If your artex ceiling has been painted before then you can paint directly without priming. However, if you’re painting over a particularly bold colour with a lighter one, you might want apply a layer of white paint first.
If your artex ceiling is looking tired or you just fancy a change, you can try plastering over your artex. You have two options when it comes to plastering over your artex: plasterboard or skimming.
Covering your ceiling with plasterboard is a good option if you suspect the artex may contain asbestos. If done carefully, it doesn’t involve disturbing the artex, reducing the risk of asbestos exposure.
You also have the option to skim over your ceiling. The first steps to this involve removing loose and flaking parts, cutting off stipples and sanding your ceiling down. So, if there’s a chance your artex ceiling may contain asbestos, this isn’t the right solution for you. However, if you’re sure there’s no asbestos in your ceiling, then sanding down and skimming over your ceiling can be a great way to create an attractive result.
It’s worth noting that both putting up plasterboard and skimming plaster can be difficult jobs. Although possible to DIY, you’re likely to get much better results if you hire a professional.
Artexing a ceiling can be a tricky job, but whether you’re considering hiring a professional or DIY, it’s helpful to know how it’s done.
Artex is available either in a paste or powder form. The paste is ideal if you’re making small repairs or additions to an existing ceiling. But, if you have a whole ceiling to cover, the powder is more cost effective. When you’re ready to get started, you’ll need to mix the powder up with cold water according to the instructions.
It’s possible to artex over plaster, plasterboard or paint. If you have a plasterboard surface, you should tape and fill any joints or cracks before you begin. Plaster and plasterboard both require a coat of sealant or primer first. You can usually artex straight over paint, but any gloss paint should be sanded down, and any dark paints covered with a layer of white.
Artexing can get quite messy, so make sure you empty the room you’re working in as much as possible, lay down sheets and wear protective clothing and glasses. You might want to practice on a piece of board before you start on the ceiling.
Start by using a brush or roller to cover a 500 square cm area with a generous layer of artex. Then use a brush, comb or roller to create your chosen texture. Every time you do a new section of ceiling, try to blend it with the other sections you’ve done. Don’t be tempted to cover the whole ceiling before you start adding texture – the artex will dry too quickly for you to do it all in time.
Artex usually needs 12-24 hours in a well-ventilated space to dry completely.
We can help you get more Artexing work and boost your business.
Join today