Artex is a substance that's used for for decorating surfaces in the inside of homes. It is usually chosen to administer a textured surface to ceilings. Artex is still fashionable in place of smooth plaster ceilings, and an expert painter and decorator will be able to apply artex in an assortment of different textured style finishes. Artex identifies a specific brand name, but there are different manufacturers who create comparable building materials. Older artex ceilings can be restored as well. There are an assortment products and applicators available in order to help make this method as straightforward as possible. There's a wide range of different alternatives when it comes to the styles of texture that artex could be used to create. Stipple, swirl, or shell effects may be administered, all of which can be accomplished as a DIY job reasonably easily. Specialist painters and decorators will be able to review with you which style would complement your space, and make sure that artex is put on in a high quality and uniform surface. Artex can also be painted over, and opting for a shade that matches the texture of the surface area can accentuate an old ceiling and breathe life into an area.
How much your artexing project might cost depends on how big the area is, how accessible it is and your location. Different professionals charge different amounts, and may spend varying amounts of time doing the work. However, the typical cost for an artexing project in the UK is about £200.
| Avg. price low | Avg. price low |
|---|---|
| Avg. price | Avg. price |
| Avg. price high | Avg. price high |
£400
£300
£200
£100
£0
| Labour cost | £140 | |
| Material cost | £50 | |
| Waste removal | £10 |
Requests for quotations in Romford in October 2024
Requests for Artexing quotations in Romford in October 2024. 0% change from September 2024.
Requests for Artexing quotations in Essex in October 2024. 0% change from September 2024.
Romford is a sizeable suburban town in the north east of London, home to 36,500 people. Romford is located in the borough of Havering, with a range of houses from contemporary to traditional. If you're interested in enhancing your property, ensure to compare quotations and get the ideal price from vetted specialists near you.
Romford - RM5
Enquiry from: Tammy C
Start Date: 1 to 3 months
Customer made an enquiry for Artexing via one of our websites. Looking at various options they would like to discuss directly Confirmed interest, SMS at 14:16, email at 14:16 Please call to discuss a...
Answer a few quick questions, so we can match you with professionals who can help.
Get free, no-obligation quotes from 4 verified Plasterers working in Romford.
Compare customer reviews, services and prices, and choose the right professional for you.
Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.
Good easy way to find a selection of trades you need all in one place.
Love LeadsDoWork it's a big part of my Business I would recommend to anyone
Artexing a ceiling can be a tricky job, but whether you’re considering hiring a professional or DIY, it’s helpful to know how it’s done.
Artex is available either in a paste or powder form. The paste is ideal if you’re making small repairs or additions to an existing ceiling. But, if you have a whole ceiling to cover, the powder is more cost effective. When you’re ready to get started, you’ll need to mix the powder up with cold water according to the instructions.
It’s possible to artex over plaster, plasterboard or paint. If you have a plasterboard surface, you should tape and fill any joints or cracks before you begin. Plaster and plasterboard both require a coat of sealant or primer first. You can usually artex straight over paint, but any gloss paint should be sanded down, and any dark paints covered with a layer of white.
Artexing can get quite messy, so make sure you empty the room you’re working in as much as possible, lay down sheets and wear protective clothing and glasses. You might want to practice on a piece of board before you start on the ceiling.
Start by using a brush or roller to cover a 500 square cm area with a generous layer of artex. Then use a brush, comb or roller to create your chosen texture. Every time you do a new section of ceiling, try to blend it with the other sections you’ve done. Don’t be tempted to cover the whole ceiling before you start adding texture – the artex will dry too quickly for you to do it all in time.
Artex usually needs 12-24 hours in a well-ventilated space to dry completely.
Artex was originally made using white asbestos to make it stronger. However, this stopped in the mid-1980s, and the use of asbestos was banned in the UK in 1999, due to its extreme health risks. So, any artex you buy today won’t contain asbestos.
If you have an artex ceiling or wall that was created before 1999, it may have asbestos in it. This won’t be a health hazard if you leave it undisturbed, so it’s not necessary to remove it. However, if you want to get rid of or alter your artex ceiling or wall, you must get it tested to check if it has asbestos in or not first. If it does, you’ll need to hire a qualified professional to work on it.
It’s possible to paint your artex ceiling if you want to smarten it up or make it a different colour.
If it’s never been painted before, you’ll need to paint it with a PVA-based solution or water-thinned paint layer to start with. You may want to scrape or sand off any loose or peeling patches beforehand, but only do this if you’re sure that the artex doesn’t contain any asbestos.
Once you’ve done this, follow with two coats of your paint of choice – ideally an emulsion. If your artex ceiling has been painted before then you can paint directly without priming. However, if you’re painting over a particularly bold colour with a lighter one, you might want apply a layer of white paint first.
Artex is a type of interior surface coating, similar to plaster. It’s used to create decorative textured finishes on ceilings and walls, so it takes longer to dry than plaster.
Artex is actually a brand name, but it’s used to refer to similar products made by other manufacturers too. It was particularly popular in the 1970s, but is still used to create attractive wall and ceiling finishes today.
We can help you get more Artexing work and boost your business.
Join today