Artex is a product used for decorating surfaces inside the interior of homes. It is commonly chosen to administer a textured surface to ceilings. Artex remains fashionable instead of smooth plaster ceilings, and a specialist painter and decorator should have the ability to apply artex in many different textured pattern finishes. Artex refers to a particular manufacturer, however there are different manufacturers who create very similar building materials. Older artex ceilings may be repaired as well, with a variety of products and applicators on the market in order to make this method as simple as possible. There is a wide variety of different alternatives for the designs of texture which artex can be used to produce. It could be applied in stipple, swirl, or shell effects, all of which can be done as a Do It Yourself project fairly easily. Professional painters and decorators will be able to examine with you what impact would best complement your area, and guarantee that artex is applied to create a superior quality and uniform finish. Artex may additionally be painted over, and picking out a colour which goes well with the texture of the surface can rejuvenate a tired ceiling and breathe life into a room.
How much your artexing project might cost depends on how big the area is, how accessible it is and your location. Different professionals charge different amounts, and may spend varying amounts of time doing the work. However, the typical cost for an artexing project in the UK is about £200.
| Avg. price low | Avg. price low |
|---|---|
| Avg. price | Avg. price |
| Avg. price high | Avg. price high |
£400
£300
£200
£100
£0
| Labour cost | £140 | |
| Material cost | £50 | |
| Waste removal | £10 |
Requests for quotations in Kinross in August 2024
Requests for Artexing quotations in Kinross in August 2024. 0% change from July 2024.
Requests for Artexing quotations in Highland in August 2024. 0% change from July 2024.
Kinross is a burgh in Perth as well as Kinross, Scotland, situated around 13 miles (21 kilometres) south of Perth as well as around 20 miles (32 kilometres) north-west of Edinburgh. It is the conventional county town of the historic county of Kinross-shire. The burgh is located on the shores of Loch Leven. There are boat trips around the loch and to Loch Leven Castle where Mary, Queen of Scots was held prisoner in 1567. Up to 2014 the yearly T in the Park music celebration. which was formally changed by TRNSMT celebration in Glasgow Eco-friendly, was held nearby, at the previous Balado landing strip. Balado is likewise the area of a now non-active NATO ICBM very early warning radar and also throughout the 2nd World War there was an airstrip as well as barracks.
Answer a few quick questions, so we can match you with professionals who can help.
Get free, no-obligation quotes from 4 verified Plasterers working in Kinross.
Compare customer reviews, services and prices, and choose the right professional for you.
Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.
Good easy way to find a selection of trades you need all in one place.
Love LeadsDoWork it's a big part of my Business I would recommend to anyone
Artex is a type of interior surface coating, similar to plaster. It’s used to create decorative textured finishes on ceilings and walls, so it takes longer to dry than plaster.
Artex is actually a brand name, but it’s used to refer to similar products made by other manufacturers too. It was particularly popular in the 1970s, but is still used to create attractive wall and ceiling finishes today.
It’s possible to paint your artex ceiling if you want to smarten it up or make it a different colour.
If it’s never been painted before, you’ll need to paint it with a PVA-based solution or water-thinned paint layer to start with. You may want to scrape or sand off any loose or peeling patches beforehand, but only do this if you’re sure that the artex doesn’t contain any asbestos.
Once you’ve done this, follow with two coats of your paint of choice – ideally an emulsion. If your artex ceiling has been painted before then you can paint directly without priming. However, if you’re painting over a particularly bold colour with a lighter one, you might want apply a layer of white paint first.
If your artex ceiling is looking tired or you just fancy a change, you can try plastering over your artex. You have two options when it comes to plastering over your artex: plasterboard or skimming.
Covering your ceiling with plasterboard is a good option if you suspect the artex may contain asbestos. If done carefully, it doesn’t involve disturbing the artex, reducing the risk of asbestos exposure.
You also have the option to skim over your ceiling. The first steps to this involve removing loose and flaking parts, cutting off stipples and sanding your ceiling down. So, if there’s a chance your artex ceiling may contain asbestos, this isn’t the right solution for you. However, if you’re sure there’s no asbestos in your ceiling, then sanding down and skimming over your ceiling can be a great way to create an attractive result.
It’s worth noting that both putting up plasterboard and skimming plaster can be difficult jobs. Although possible to DIY, you’re likely to get much better results if you hire a professional.
Artexing a ceiling can be a tricky job, but whether you’re considering hiring a professional or DIY, it’s helpful to know how it’s done.
Artex is available either in a paste or powder form. The paste is ideal if you’re making small repairs or additions to an existing ceiling. But, if you have a whole ceiling to cover, the powder is more cost effective. When you’re ready to get started, you’ll need to mix the powder up with cold water according to the instructions.
It’s possible to artex over plaster, plasterboard or paint. If you have a plasterboard surface, you should tape and fill any joints or cracks before you begin. Plaster and plasterboard both require a coat of sealant or primer first. You can usually artex straight over paint, but any gloss paint should be sanded down, and any dark paints covered with a layer of white.
Artexing can get quite messy, so make sure you empty the room you’re working in as much as possible, lay down sheets and wear protective clothing and glasses. You might want to practice on a piece of board before you start on the ceiling.
Start by using a brush or roller to cover a 500 square cm area with a generous layer of artex. Then use a brush, comb or roller to create your chosen texture. Every time you do a new section of ceiling, try to blend it with the other sections you’ve done. Don’t be tempted to cover the whole ceiling before you start adding texture – the artex will dry too quickly for you to do it all in time.
Artex usually needs 12-24 hours in a well-ventilated space to dry completely.
We can help you get more Artexing work and boost your business.
Join today