Artex is a material used for surface decorating in the inside of homes. It is usually made use of to administer a textured surface to ceilings. Artex is still in demand as a substitute to smooth plaster ceilings, and an experienced painter and decorator will have the ability to apply artex in numerous different textured design finishes. Artex refers to a specific brand, however there are other manufacturers who make comparable products. Older artex ceilings can be fixed as well. There are a variety of materials and applicators available to make this task as convenient as possible. There is a wide array of of different alternatives with regard to the styles of texture that artex may be used to create. Stipple, swirl, or shell effects could be administered, all of which can be completed as a Do It Yourself project comparatively easily. Professional painters and decorators will be able to examine with you which impact would best match your area, and make sure that artex is applied to create a high quality and uniform finish. Artex may even be painted over, and choosing a colour which complements the texture of the surface can regenerate an old ceiling and breathe life into a room.
How much your artexing project might cost depends on how big the area is, how accessible it is and your location. Different professionals charge different amounts, and may spend varying amounts of time doing the work. However, the typical cost for an artexing project in the UK is about £200.
| Avg. price low | Avg. price low |
|---|---|
| Avg. price | Avg. price |
| Avg. price high | Avg. price high |
£400
£300
£200
£100
£0
| Labour cost | £140 | |
| Material cost | £50 | |
| Waste removal | £10 |
Requests for quotations in Crieff in October 2024
Requests for Artexing quotations in Crieff in October 2024. 0% change from September 2024.
Requests for Artexing quotations in Perthshire in October 2024. 0% change from September 2024.
Crieff is a Scottish market town in Perth and also Kinross. It rests on the A85 road in between Perth and also Crianlarich, and also the A822 in between Greenloaning and also Aberfeldy. The A822 signs up with the A823, which causes Dunfermline. Crieff has become a hub for tourism, famous for its whisky and history of livestock droving. Destinations consist of the Caithness Glass Visitor Centre and Glenturret Distillery. The close-by Innerpeffray Library (started regarding 1680), is Scotland's earliest lending library. St Mary's Chapel, beside the collection, days from 1508. Both are open to the public: the library is run by a charitable depend on, while the chapel remains in the care of Historic Scotland.
Answer a few quick questions, so we can match you with professionals who can help.
Get free, no-obligation quotes from 4 verified Plasterers working in Crieff.
Compare customer reviews, services and prices, and choose the right professional for you.
Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.
Good easy way to find a selection of trades you need all in one place.
Love LeadsDoWork it's a big part of my Business I would recommend to anyone
Artex is a type of interior surface coating, similar to plaster. It’s used to create decorative textured finishes on ceilings and walls, so it takes longer to dry than plaster.
Artex is actually a brand name, but it’s used to refer to similar products made by other manufacturers too. It was particularly popular in the 1970s, but is still used to create attractive wall and ceiling finishes today.
It’s possible to paint your artex ceiling if you want to smarten it up or make it a different colour.
If it’s never been painted before, you’ll need to paint it with a PVA-based solution or water-thinned paint layer to start with. You may want to scrape or sand off any loose or peeling patches beforehand, but only do this if you’re sure that the artex doesn’t contain any asbestos.
Once you’ve done this, follow with two coats of your paint of choice – ideally an emulsion. If your artex ceiling has been painted before then you can paint directly without priming. However, if you’re painting over a particularly bold colour with a lighter one, you might want apply a layer of white paint first.
Artexing a ceiling can be a tricky job, but whether you’re considering hiring a professional or DIY, it’s helpful to know how it’s done.
Artex is available either in a paste or powder form. The paste is ideal if you’re making small repairs or additions to an existing ceiling. But, if you have a whole ceiling to cover, the powder is more cost effective. When you’re ready to get started, you’ll need to mix the powder up with cold water according to the instructions.
It’s possible to artex over plaster, plasterboard or paint. If you have a plasterboard surface, you should tape and fill any joints or cracks before you begin. Plaster and plasterboard both require a coat of sealant or primer first. You can usually artex straight over paint, but any gloss paint should be sanded down, and any dark paints covered with a layer of white.
Artexing can get quite messy, so make sure you empty the room you’re working in as much as possible, lay down sheets and wear protective clothing and glasses. You might want to practice on a piece of board before you start on the ceiling.
Start by using a brush or roller to cover a 500 square cm area with a generous layer of artex. Then use a brush, comb or roller to create your chosen texture. Every time you do a new section of ceiling, try to blend it with the other sections you’ve done. Don’t be tempted to cover the whole ceiling before you start adding texture – the artex will dry too quickly for you to do it all in time.
Artex usually needs 12-24 hours in a well-ventilated space to dry completely.
If your artex ceiling is looking tired or you just fancy a change, you can try plastering over your artex. You have two options when it comes to plastering over your artex: plasterboard or skimming.
Covering your ceiling with plasterboard is a good option if you suspect the artex may contain asbestos. If done carefully, it doesn’t involve disturbing the artex, reducing the risk of asbestos exposure.
You also have the option to skim over your ceiling. The first steps to this involve removing loose and flaking parts, cutting off stipples and sanding your ceiling down. So, if there’s a chance your artex ceiling may contain asbestos, this isn’t the right solution for you. However, if you’re sure there’s no asbestos in your ceiling, then sanding down and skimming over your ceiling can be a great way to create an attractive result.
It’s worth noting that both putting up plasterboard and skimming plaster can be difficult jobs. Although possible to DIY, you’re likely to get much better results if you hire a professional.
We can help you get more Artexing work and boost your business.
Join today