Air Source Heat Pump in Kingston Upon Thames

Obtain Air Source Heat Pump Prices in Kingston Upon Thames

Home > Renewable Energy Projects > Air source heat pump > Kingston Upon Thames

Air Source Heat Pump in Kingston Upon Thames

Considering installing an air source heat pump? Or questioning just how much an air-source heatpump costs in Kingston Upon Thames

Air source heat pumps are a highly reliable way to warm your property. They can work by themselves. Or collaborate with your existing main heating unit to give warm water as well as inexpensive year-round warmth.

 

What is an air source heat pump?

A lot of property heating unit either burn fuel, or convert electrical energy into heat. However heatpump are different, as they do not produce warmth.

Instead, they relocate existing heat from outdoors right into your house. This makes them extra efficient. Since they supply much more heat energy than the electrical energy they take in. So a heat-pump system usually sets you back less to run than a standard heating system also. Air source heatpump are a sort of renewable resource modern technology that take the warmth from the air outside (even when it's freezing) and also use it to heat the house. You can obtain other heat pumps that do the same point utilizing the heat in the ground and in water, yet air source heat pumps are suitable for a larger range of homes. Because the air (or ground, or water) is warmed by the sun, the energy that heat pumps create is still classified as ' eco-friendly', despite the fact that the pump itself is powered by electricity which may or might not have a sustainable source.

There are two types of air source heatpump. Air-to-water systems warm water which is after that distributed around the property using radiators or an underfloor heater. They can also be made use of to warm water in a tank for the restroom or kitchen. Air-to-air systems usually utilize fans to flow cozy air around the home as well as can not be made use of to heat water.

 

How does an air source heatpump job?

An air source heatpump takes warm from the air as well as increases it to a higher temperature level utilizing a compressor. It after that moves the warm to the heater in your home. They function a little bit like fridges in reverse.

  1. The air source heatpump soaks up warmth from the outdoors air into a liquid refrigerant at a low temperature level. Using electrical power, the pump compresses the liquid to enhance its temperature.
  2. It then condenses back right into a fluid to release its kept warm.
  3. Warmth is sent out to your radiators or underfloor home heating.
  4. The rest can be kept in your hot water cyndrical tube.
  5. You can use your saved warm water for showers, baths as well as taps.

The pump uses electricity to run, yet it needs to utilize much less electrical power than the heat it creates. This makes them an energy-efficient method to heat your house. Air source heat pumps function even if the temperature level is well below zero.

 

Is my house suitable?

Heatpump make most economic sense in buildings which are off the national gas grid and which consequently utilize costly gas like electricity, oil, LPG or coal for space heating. If you're linked to keys gas, then economically you'll most likely be far better off with gas main home heating.

A well-insulated home with high criteria of air-tightness is also preferable, although boosting the general power performance of your property will assist-- as reducing your heating needs will enable you to run a smaller and more affordable heat pump. This is since heatpump are most efficient in homes which warm up rapidly, keep the heat in and so call for little power to maintain a temperature once it has actually been reached.

 

Just how much does an air source heatpump price?

An air-to-water heatpump commonly costs in between ₤ 7,000 and ₤ 11,000, according to the Energy Conserving Count On. The prices vary relying on the dimension of the heat pump, the complexity of the system as well as whether you pick simple or advanced controls ( for instance a weather-compensated thermostat).

 

Maintenance costs for air source heat pumps are low. They are trustworthy, work instantly as well as most will operate for twenty years or more. Your installer should recommend on any kind of upkeep needed, such as an annual check by you as well as a service every couple of years by a specialist.

These costs depend on many factors, including:

  • The size of your home
  • How well insulated your home is
  • The brand of the pump
  • The pump size
  • The performance/efficiency of the pump

 

Can I obtain an air source heatpump grant?

They're included in the Renewable Heat Incentive (RHI). This government plan pays home owners in England, Scotland as well as Wales for the sustainable heat they generate.

RHI payments last for seven years. As well as for the biggest systems, you can rise to ₤1,300 annually. If you have applied for any other government grants, these may be subtracted from your RHI earnings. You can lower the in advance expense of installing an air source heatpump by appointing your RHI payments to a participating installer too.

 

Where can I discover an Air Source Heatpump installer?

We will provide up to 4 Air source heat pump pros locally, that will supply quotations for the job you desire done. You'll get a property visit from professionals in Kingston Upon Thames that'll aid you to pick the appropriate Air source heat pump for your residence prior to performing the installment. Enter your postcode to start looking now.

Average Air source heat pump cost in Kingston Upon Thames

How much it will cost you to install an air source heat pump on your property depends on the type of building you have, how powerful your heat pump needs to be, and your location. However, the common price for an air source heat pump installation is about £7,000 Kingston Upon Thames.

Average price per Air source heat pump job in 2025

Avg. price low

Avg. price low
£5,250

Avg. price

Avg. price
£7,000

Avg. price high

Avg. price high
£8,050

£8600

£6450

£4300

£2150

£0

Prices based on actual Air source heat pump costs for Kingston Upon Thames, as reported by local LeadsDoWork members.

Air source heat pump installation cost in Kingston Upon Thames 2025

Labour cost £4,900
Material cost £1,750
Waste removal £350
Time frame: 1-3 days

Air source heat pump searches in January 2025

Air source heat pump Projects in Kingston Upon Thames in December 2024

3,268

Requests for quotations in Kingston Upon Thames in December 2024

22

Requests for Air source heat pump quotations in Kingston Upon Thames in December 2024. 0% change from December 2024.

270

Requests for Air source heat pump quotations in Surrey in December 2024. 4% change from December 2024.

We noted 3,268 requests for property or home quotations in Kingston Upon Thames. Of these quote requests the number of air source heat pump quotations within Kingston Upon Thames was 22. Quotatis would have been able to match these consumers with as many as four suitable installers who were available for work in Kingston Upon Thames at that time. Ask for a free property survey from reputable companies within Kingston Upon Thames.

Source: Numbers calculated based on the search volumes in major search engines

Air source heat pump searches in cities and towns near Kingston Upon Thames December 2024

22

Requests for quotations in Kingston Upon Thames in December 2024

10

Requests for quotations in Walton-on-thames in December 2024

10

Requests for quotations in Esher in December 2024

10

Requests for quotations in Weybridge in December 2024

10

Requests for quotations in Chertsey in December 2024

Kingston Upon Thames

Kingston upon Thames is a key settlement in southwest London and a historical market town which includes a populace around 50,000. It was identified as among the city's significant metropolitan areas and is bordered by the County of Surrey. For the property upgrades you have got planned for the Kingston upon Thames region, be sure to make use of vetted contractors in your area for the best price in addition to a good quality finish.

Looking for Air source heat pump in Kingston Upon Thames?

Get free quotes from local renewable energy specialists

Get free quotes

Similar Customer Enquiries for Air source heat pump in Kingston Upon Thames

14 Nov

Heating | Air Source Heatpumps

Kingston upon Thames - KT1

Enquiry from: Anton A

Start Date: Immediate

Call back anytime. Type of building: Semi-detached Number of bedrooms: 5 Mains Gas available: Yes Age of Boiler (years): 9 How became interested in heat pump: Reduce Bills Quote requested on ...

Post a similar request >

27 Sep

Heating | Air Source Heatpumps

Kingston upon Thames - KT2

Enquiry from: Alan F

Start Date: Immediate

Call anytime Type of building: Detached Number of bedrooms: 3 Mains Gas available: Yes Age of Boiler (years): 12 How became interested in heat pump: Save Money Quote requested on air source ...

Post a similar request >

29 Mar

Heating | Air Source Heatpumps

Kingston upon Thames - KT2

Enquiry from: Guy F

Start Date: Immediate

Call back anytime. Type of building: Detached Number of bedrooms: 5 Mains Gas available: Yes Age of Boiler (years): 43 How became interested in heat pump: Reduce Bills Quote requested on air ...

Post a similar request >

02 Jan

Heating | Air Source Heatpumps

Kingston upon Thames - KT2

Enquiry from: Rupert N

Start Date: Immediate

Air Source heat pump quotes

Post a similar request >

06 Oct

Heating | Air Source Heatpumps

Kingston upon Thames - KT2

Enquiry from: Jamie H

Start Date: Immediate

replace existing boiler with air source heat pump for 4 bed detached house. 120 years old are you the property owner: owner of the property property type: detached how many bedrooms do you have: 3-4 ...

Post a similar request >

01 Jul

Heating | Air Source Heatpumps

Kingston upon Thames - KT2

Enquiry from: Tristan F

Start Date: Immediate

customer in the kingston upon thames area made an enquiry a couple of projects including air source heat pumps.call anytime and arrange an appointment to discuss. below is some details about this proj...

Post a similar request >

25 Mar

Heating | Air Source Heatpumps

Kingston upon Thames - KT2

Enquiry from: Steve B

Start Date: Immediate

Call anytime. Type of building: Detached Number of bedrooms: 5 How became interested in heat pump: Save money Quote requested on air source (wet) heat pump, to be supplied and fitted.

Post a similar request >

10 Mar

Heating | Air Source Heatpumps

Kingston upon Thames - KT1

Enquiry from: Lina M

Start Date: Immediate

Call any-time Type of building: Semi-detached Number of bedrooms: 5 How became interested in heat pump: Change heating technology Quote requested on air source (wet) heat pump, to be supplied ...

Post a similar request >

01 Mar

Heating | Air Source Heatpumps

Kingston upon Thames - KT2

Enquiry from: Julian H

Start Date: Immediate

call any time. type of building: semi-detached number of bedrooms: 3 length of garden: 10 m. width of garden: 10 m. access available for excavator: yes how became interested in heat pump: to hel...

Post a similar request >

16 Feb

Heating | Air Source Heatpumps

Kingston upon Thames - KT2

Enquiry from: Darren I

Start Date: Immediate

call any time. type of building: detached number of bedrooms: 5 how became interested in heat pump: to help heat property. quote requested on air source (wet) heat pump, to be supplied and fit...

Post a similar request >

11 Jan

Heating | Air Source Heatpumps

Kingston upon Thames - KT1

Enquiry from: Alastair M

Start Date: Immediate

Call any time. Type of building: Semi-detached Number of bedrooms: 4 How became interested in heat pump: To help heat property. Quote requested on air source (wet) heat pump, to be supplied a...

Post a similar request >

06 Jan

Heating | Air Source Heatpumps

Kingston upon Thames - KT1

Enquiry from: Alastair M

Start Date: Immediate

call any-time type of building: terraced number of bedrooms: 4 how became interested in heat pump: change heating technology quote requested on air source (wet) heat pump, to be supplied and f...

Post a similar request >

09 Oct

Heating | Air Source Heatpumps

Kingston upon Thames - KT2

Enquiry from: Laure T

Start Date: Immediate

call anytime. type of building: semi-detached number of bedrooms: 5 how became interested in heat pump: save money quote requested on air source (wet) heat pump, to be supplied and fitted. are...

Post a similar request >

05 Oct

Heating | Air Source Heatpumps

Kingston upon Thames - KT2

Enquiry from: Andreas K

Start Date: Immediate

Call anytime. Type of building: Semi-detached Number of bedrooms: 4 How became interested in heat pump: Save money Quote requested on air source (wet) heat pump, to be supplied and fitted.

Post a similar request >

17 Jun

Heating | Air Source Heatpumps

Kingston upon Thames - KT2

Enquiry from: Joanne A

Start Date: Immediate

are you the property owner: tenant (with permission) property type: detached other forms: solar electricity, air source heat pumps agreed to receive quotes for selected products: yes please call to a...

Post a similar request >

16 Jul

Heating | Air Source Heatpumps

Kingston upon Thames - KT1

Enquiry from: Garth W

Start Date: 1 to 3 months

We are a church in Hampton Wick and we have a building that is fitted with Vaillant Air Source Heat Pumps, model VAIM2. I have been trying to find a company that can service these units and wondered ...

Post a similar request >

05 Jan

Heating | Air Source Heatpumps

Kingston upon Thames - KT2

Enquiry from: R

Start Date: Immediate

Are you the property owner: Owner of the property Property Type: Terrace How many bedrooms does the property have: 3-4 Time scale: Less than one month Please Call to Appoint

Post a similar request >

20 Dec

Heating | Air Source Heatpumps

Kingston upon Thames - KT2

Enquiry from: Srimantha R

Start Date: Immediate

Are you the property owner: Owner of the property Property Type: Terrace How many bedrooms does the property have: 3-4 Is your roof obstructed by: No obstructions What is the direction of the roof...

Post a similar request >

Local & reliable renewable energy specialists near me

Tell us about your air source heat pump project

Answer a few quick questions, so we can match you with local renewable energy specialists who can help.

Find up to 4 renewable energy specialists in Kingston Upon Thames

Get free, no-obligation local air source heat pump quotes from 4 verified renewable energy specialists working in Kingston Upon Thames.

Hire with confidence

Compare customer reviews, services and prices, and choose the right tradesperson for you.

Our reviews

Average

Would highly recommend

Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.

Good easy way to find a selection of…

Good easy way to find a selection of trades you need all in one place.

Love LeadsDoWork it's a big part of my …

Love LeadsDoWork it's a big part of my Business I would recommend to anyone

FAQs

Are heat pumps efficient?

Air source heat pumps can be a really efficient way to generate heat. Although they require electricity to run, they generate much more heat than an electric heater that uses the same amount.

Air source heat pumps provide heat at a lower temperature than most other types of space heating. This means they’re most efficient when they’re left on for longer periods of time, and distribute heat through wet heating systems with large surface areas, like underfloor heating or big radiators.

Air source heat pumps can be much more efficient than oil and LPG boilers, and older electric heating systems. However, they’re only usually the most efficient option if your property is very well insulated.

Are heat pumps noisy?

Air source heat pumps do make a bit of noise. However, it’s the external unit that makes the noise, minimising disruption in your home. And while it’s a good idea to ensure your external unit isn’t located directly under your bedroom window or very close to a neighbour’s property, it won’t be louder than 40-60 decibels. In many cases, this is actually quieter than a fossil fuel-powered boiler.

how does an air source heat pump work?

Air source heat pumps work by taking heat from the air and using it to heat your home. They absorb heat from the air into a fluid, which then goes to a compressor where it gets hotter. This heat is then used to warm up water or air, which is distributed around your home.

First and foremost, you should know that heat pump is simply a device whose primary function is the transmission of thermal energy from one spot to the other. A good example can be found in the refrigerators whereby the evaporation as well as cooling of a liquid is incorporated to lower the storage compartment’s temperature. In recent times, this whole technology is utilized to draw the potential thermal energy present in the air outside and transmit it directly to the home or property where it’s going to be compressed and the heat transferred with the help of a number of coils. This is exactly what an air source heat pump does as it absorbs heat from the air and convert it into a higher temperature using a compressor. How the air source heat pump works is really simple, it’s just like a refrigerator but in reverse. Let’s take a look!

  • The air source heat pump extracts heat present in the outside air into a liquid refrigerant at a reduced temperature.
  • The pump then compresses the liquid to increase its temperature with the help of electricity. Once done, it then compresses it back to liquid so as to free the heat stored.
  • The heat released is then directed to the radiators or under floor heating, while the ones left would be stored in the hot water cylinder.
  • The hot water that’s stored can be used for showers, baths as well as taps.

Overall, the air source heat pump is an efficient way to make your home warm. It makes use of electricity to function, but it should consume lower electrical energy than the heat it generates.

How do air source heat pumps work?

Air source heat pumps work by absorbing heat from the outside air and transferring it inside to heat up your property.

An air source heat pump has an outdoor unit containing a refrigerant. This absorbs heat from the air and passes into a compressor, where the temperature is increased. The heat then transfers either into water, which feeds into your wet heating system, or into air, which is dispersed around your property.

Air source heat pumps need electricity to run, but this is to power the compressor rather than directly generate heat.

Placholder Image

Other Top Projects in Kingston Upon Thames

Customer Reviews

Overall rating:


Kingston Upon Thames Air source heat pump installers are rated 4.7 out of 5 based on 2 reviews of 22 pros.
The LeadsDoWork rating and review is an overall rating based on verified reviews and feedback from the customers with Air source heat pump projects that have been connected with Air source heat pump pros to help them. All Air source heat pump contractors All Kingston Upon Thames Air source heat pump contractors
Can I heat water with an air source heat pump? Published: 08/07/2014 Air source heat pumps are becoming popular in the UK, mainly because of the lucrative Renewable Heat Incentive, which will earn you thousands of pounds ... Read this article
Tips for investing in a heat pump Published: 06/06/2014 Heat pumps are a brilliant technology and you can make huge savings with an investment, when you compare it to the price you pay for ... Read this article
Is a heat pump suitable for my home? Published: 06/06/2014 Heat pumps have grown into one of the most popular renewable technologies in the UK in recent years because of the huge savings and earnings ... Read this article

Are you a renewable energy specialist in Kingston Upon Thames?

We can help you get more air source heat pump work with our qualified job leads and boost your business.

Join today