Laying simple, ground-level decking may sound intimidating, but it doesn’t have to be. With careful planning and preparation, you can lay decking that you’ll be proud to show off to neighbours, family and friends. Here are a few tips to get you started. Plan carefully Draw out a plan, to scale, on paper. This will help you to know how many boards you’ll need and ensure that you don’t end up having to cut anything to fit. Prepare the area Measure out the site according to your plan and hammer a peg into each corner, then tie string around each peg to help you see what you’re working with. If you’re not laying on existing slabs, dig into the ground, lifting out turf if it’s there, and check that the site is level. Then add concrete slabs for more stability or lay weed-control fabric over the ground and cover with gravel to further prevent weed growth. Build your sub-frame Since a lot of people ask this, we’ve got a more detailed guide in the FAQ below. Lay your deck boards Start in one corner of the sub-frame and position the first board across the inner joists. You want the deck board in the opposite direction to the inner joists, ensuring that it’s flush with the frame. Position any end-to-end joins between the deck boards halfway across an inner joist so you can screw both boards into the joist for stability. Make sure you keep a gap of between 5-8mm to allow for expansion of the wood. Begin to screw your deck boards to the joists. You’ll need to secure the deck board to every joist is covers along your deck frame. Use two screws for every joist. Mark where you’re going to add your screws, ensuring that they are at least 15mm from the end of the board and 20mm from the outside edges. Drill pilot holes for the screws, being careful to only drill through the deck board and not the joist. Then screw the decking screws into the holes. Continue to screw in the deck boards, ensuring you leave the correct expansion gap. You can stagger the deck board joins across the deck for more strength. Sand down any cut ends if you need to before applying decking preserver to protect the timber from rotting. Although this is a simplified set of instructions, it’s enough for you to see whether you want to attempt to lay decking yourself – and if you don’t, you can get in touch with professionals who will be happy to give you a quote.

Wooden Decking in Watford

Compare Wooden Decking Prices in Watford

Wooden Decking in Watford

Wooden decking is an increasingly prevalent choice for creating outdoor seating areas in gardens. Because of the natural beauty of wood, they can be very beautiful spaces which you can use year round by using outside heating and illumination. Wooden decking is frequently fitted in locations in front of patio or French doors where they can create a smooth transition between inside and outside spaces. Wooden decking is available in virtually any size or shape to match any area. Curved designs or large areas linked by pathways can create a stunning effect. Wooden decking is fairly easy to install and causes little disruption, particularly when compared to alternatives like patio or paving. It could even be installed over the top of a pre-existing patio. It is essential however to be certain that your wooden decking is structurally sound and capable of taking the load of any furniture or plants that you would like to use on the decking. There is a array of varieties of wood that can be used in wooden decking. Often decking is made of hardwood, but there are softwoods available that fulfil the durability specifications. As hardwood decking will demand maintenance, which typically involves yearly cleaning and staining for weather proofing, composite woods are becoming popular for use in wooden decking because they are more robust and require much less maintenance.

Average Wooden decking cost in Watford

The typical cost of Wooden decking is £1500. Costs can change based upon the materials and the firm hired. The upper price range can be as high as £1725. The material costs are commonly approximately £375

Average price per Wooden decking job in 2025

Avg. price low	Avg. price low £663
Avg. price	Avg. price £2,050
Avg. price high	Avg. price high £3,363

£3500

£2625

£1750

£875

£0

Prices based on actual Wooden decking costs for Watford, as reported by local LeadsDoWork members.

Wooden decking installation cost in Watford 2025

	Labour cost	£1,050
	Material cost	£375
	Waste removal	£75

Time frame: 1-4 days

Wooden decking searches in January 2025

Choose your search type

No. of estimated projects Estimates by cities and towns

Wooden decking Projects in Watford in December 2024

3,979

Requests for quotations in Watford in December 2024

0

Requests for Wooden decking quotations in Watford in December 2024. 0% change from November 2024.

0

Requests for Wooden decking quotations in Hertfordshire in December 2024. 0% change from November 2024.

Source: Numbers calculated based on the search volumes in major search engines

Wooden decking searches in cities and towns near Watford December 2024

Wooden decking near you

Choose locations

Towns and Cities near Watford Other locations within East Midlands

Watford

The town and borough of Watford, positioned in Hertfordshire, is only 18 miles northwest of central London and inside the M25 boundaries. On the other hand, the borough is kept separate from the Greater London region, but its substantial populace of 80,000 still offers it a density of 9,600 individuals every sq mile. Included in the Watford postcode area are nearby regions Croxley Green, Rickmansworth, Carpenders Park and South Oxhey. To find the best property enhancement quotations from respected companies in Watford, don't forget to use our free of charge and simple service.

Looking for Wooden decking in Watford?

Get free quotes from local carpenters

Get free quotes

Wooden decking pros in Watford

See other Wooden decking Pros in Watford

Similar Customer Enquiries for Wooden decking in Watford

24 Jan

Garden | Decking

Watford - WD25

Enquiry from: Nick S

Start Date: Immediate

i have a hot tub made out of cedar. part of the tub already has a surround and steps leading up to the top to get in! however i would like to build a sun burst deck to match the surround and tie in ...

Post a similar request >

12 Jan

Watford - WD19

Enquiry from: Harsh A

Start Date: Immediate

Are you the property owner: Owner of the property Property Type: Semi detached Wooden Decking What level of service do you require: Supply and deck Time scale: Immediate Please Contact to Appoin...

Post a similar request >

Local & reliable carpenters near me

Tell us about your wooden decking project

Answer a few quick questions, so we can match you with local carpenters who can help.

Find up to 4 carpenters in Watford

Get free, no-obligation local wooden decking quotes from 4 verified carpenters working in Watford.

Hire with confidence

Compare customer reviews, services and prices, and choose the right tradesperson for you.

Our reviews

Average

Would highly recommend

Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.

Good easy way to find a selection of…

Good easy way to find a selection of trades you need all in one place.

Love LeadsDoWork it's a big part of my …

Love LeadsDoWork it's a big part of my Business I would recommend to anyone

FAQs

You might think that building decking on a slope is a no-go, but it’s actually a great way to help you make use of your garden when the ground is sloping. It will provide you with a level surface that you can BBQ on as well as dine alfresco without finding that your meal is rolling down the table. But how do you build decking on a slope? Our guide in the FAQ above, ‘How to build a raised deck’, is the perfect solution – but we’ll break it down here if you just want to get an idea of what’s involved. Dig out the area If you’re laying on soil or turf, you’ll need to dig it out. Dig down and remove all the turf from the area and ensure that there are no weeds or stones in the area you’re going to build your decking on. Since you’re building on a slope, it will be hard to get it level, but dig out to a depth of 50mm and lay weed-control fabric with gravel over the top. Add posts and set with concrete Make holes for posts and add them in, ensuring they’re longer than you need. Make sure they’re level, then fill the holes with a concrete mix to set them in place. Build the outer frame Make sure you always work at the top of the slope when you’re building your decking, and measure where the highest point of the decking will be. Secure the 4 sides of the outer frame and factor in a 2mm fall for every metre of decking so rainwater can run off. Add joists Secure joists along your frame at 400mm intervals. If you get to the last joist and there will be more than a 400mm gap left at the end, add in an extra one for support. Lay your deck boards Screw your deck boards to the joists, ensuring that the deck boards are running in the opposite direction to the joists. For timber boards, you need to make sure you leave an expansion gap of 5-8mm. These steps should give you an idea of whether you want to have a go at building decking on a slope, or whether you want to leave it to the pros.

Yes, although you should make sure that the terrace or decking is able to support the weight of a hot tub. Usually, you will need to have a structural survey carried out on the area. Seek the advise of a hot tub retailer or installer about the logistics of installing one at your property.

How much decking you need will – of course – depend on how big you plan your deck to be. There is an equation to help you work out how many deck boards you need. It’s a little complicated until you’ve been shown how it works, but once you know how to do it it’s easy to work out how much decking you need for any project. The equation takes into account the recommended 10% wastage and includes the expansion gaps that are required, which is between 5-8mm along the length of the deck boards (EGL, or expansion gap length) and 3mm along the ends of the deck boards (EGW, or expansion gap width) for timber. It also assumes you’re laying your decking horizontally, as if you’re looking for a diagonal or chevron design you’ll need more deck boards. Let’s go through an example, assuming you have a 10m x 6m area that you want to cover with decking made from timber boards that are 2.4m long and 144mm wide. We’ll use the EGL of 5mm and EGW of 3mm.

Calculate the surface area for your decking Multiply the length (L) of your decking area by the width (W): L x W = Decking Surface Area (DSA) in m² 10 x 6 = 60m²
Work out the coverage of your deck boards Add your deck board width (DBW) to the expansion gap length (EGL), then add the deck board length (DBL) to the expansion gap width (EGW). Then multiply these numbers. (DBW + EGL) x (DBL + EGW) = Single Board Coverage (SBC) 0.144m + 0.005m = 0.149m 2.4m + 0.003m = 2.403m 0.149 x 2.403 = 0.358m²
Calculate the number of deck boards you need Multiply the SBC by 1.1 to allow for 10% wastage. Then, divide the DSA by the SBC. DSA / SCB x 1.1 = Total number of boards required 60m² / 0.358m² x 1.1 = 184.36 boards – so round up to 185 so you’re not left short.

If that all seems a bit complicated for you, let a professional do the maths – they will be able to give you an idea of how much decking you’ll need in no time.

Laying simple, ground-level decking may sound intimidating, but it doesn’t have to be. With careful planning and preparation, you can lay decking that you’ll be proud to show off to neighbours, family and friends. Here are a few tips to get you started. Plan carefully Draw out a plan, to scale, on paper. This will help you to know how many boards you’ll need and ensure that you don’t end up having to cut anything to fit. Prepare the area Measure out the site according to your plan and hammer a peg into each corner, then tie string around each peg to help you see what you’re working with. If you’re not laying on existing slabs, dig into the ground, lifting out turf if it’s there, and check that the site is level. Then add concrete slabs for more stability or lay weed-control fabric over the ground and cover with gravel to further prevent weed growth. Build your sub-frame Since a lot of people ask this, we’ve got a more detailed guide in the FAQ below. Lay your deck boards

Start in one corner of the sub-frame and position the first board across the inner joists. You want the deck board in the opposite direction to the inner joists, ensuring that it’s flush with the frame. Position any end-to-end joins between the deck boards halfway across an inner joist so you can screw both boards into the joist for stability. Make sure you keep a gap of between 5-8mm to allow for expansion of the wood.
Begin to screw your deck boards to the joists. You’ll need to secure the deck board to every joist is covers along your deck frame. Use two screws for every joist. Mark where you’re going to add your screws, ensuring that they are at least 15mm from the end of the board and 20mm from the outside edges. Drill pilot holes for the screws, being careful to only drill through the deck board and not the joist. Then screw the decking screws into the holes.
Continue to screw in the deck boards, ensuring you leave the correct expansion gap. You can stagger the deck board joins across the deck for more strength.
Sand down any cut ends if you need to before applying decking preserver to protect the timber from rotting.

Although this is a simplified set of instructions, it’s enough for you to see whether you want to attempt to lay decking yourself – and if you don’t, you can get in touch with professionals who will be happy to give you a quote.

Other Top Projects in Watford

Customer Reviews

Overall rating:

Watford Wooden decking installers are rated 4.5 out of 5 based on 30 reviews of 175 pros.

The LeadsDoWork rating and review is an overall rating based on verified reviews and feedback from the customers with Wooden decking projects that have been connected with Wooden decking pros to help them. All Wooden decking contractors All Watford Wooden decking contractors

Need more help?

Resin recoating for damaged fibreglass flat roof in Deal Published: 18/01/2025 Address air bubble cracks and sun damage on a fibreglass flat roof in Deal with professional resin recoating. Restore durability and weatherproofing. Read this article

Electric shower supply and fitting in Hawick Published: 18/01/2025 Upgrade your shower with a professionally supplied and fitted electric shower in an existing cubicle in Hawick. Reliable installation tailored to your needs. Read this article

Resolving damp issues in living room floor corner in Cardigan Published: 18/01/2025 Experiencing damp in the corner of your living room floor in Cardigan? Discover effective damp proofing solutions to protect your home. Read this article

Are you a carpenter in Watford?

We can help you get more wooden decking work with our qualified job leads and boost your business.

Join today

Wooden Decking in Watford

Compare Wooden Decking Prices in Watford