Wooden Decking in Stranraer

Obtain Wooden Decking Prices in Stranraer

Trustpilot 4.5 stars
Home > Gardening & Landscaping Projects > Wooden decking > Stranraer

Wooden Decking in Stranraer

Wooden decking is an increasingly popular choice for providing outdoor seating areas in gardens. Due to the natural beauty of wood, they can be very fashionable spaces which you can use year round with the addition of additional heating and lighting. Wooden decking is frequently installed in locations in front of patio or French doors where they can create a seamless transition between interior and exterior spaces. Wooden decking can come in any size or shape to match any area. Curved designs or large areas linked by pathways can produce an attractive effect. Wooden decking is relatively quick to install and causes little disruption, especially when compared to alternatives like patio or paving. It could even be installed over the top of a pre-existing patio. It is necessary however to be sure that your wooden decking is structurally sound and able to take the weight of any furniture or plants that you would like to use on the decking. There is a array of types of wood that can be used in wooden decking. Typically decking is constructed from hardwood, but there are softwoods available that fulfil the durability specifications. As hardwood decking will demand maintenance, which typically involves yearly cleaning and staining for weather proofing, composite woods have become popular for use in wooden decking as they are stronger and require far less maintenance.

Average Wooden decking cost in Stranraer

The typical cost of Wooden decking is £1500. Costs can change based upon the materials and the firm hired. The upper price range can be as high as £1725. The material costs are commonly approximately £375

Average price per Wooden decking job in 2024

Avg. price low

Avg. price low
£613
Avg. price

Avg. price
£1,025
Avg. price high

Avg. price high
£1,363

£1500

£1125

£750

£375

£0

Prices based on actual Wooden decking costs for Stranraer, as reported by local LeadsDoWork members.

Wooden decking installation cost in Stranraer 2024

Labour cost £1,050
Material cost £375
Waste removal £75
Time frame: 1-4 days

Wooden decking searches in November 2024

Wooden decking Projects in Stranraer in October 2024

0

Requests for quotations in Stranraer in October 2024

0

Requests for Wooden decking quotations in Stranraer in October 2024. 0% change from September 2024.

0

Requests for Wooden decking quotations in Wigtownshire in October 2024. 0% change from September 2024.

Source: Numbers calculated based on the search volumes in major search engines

Wooden decking searches in cities and towns near Stranraer October 2024

Wooden decking near you

Stranraer

Stranraer is a community in Inch, Wigtownshire, in the west of Dumfries and Galloway, southwest Scotland. It lies on the coasts of Loch Ryan, on the north side of the isthmus signing up with the Rhins of Galloway to the mainland. According to the 2001 Census, the town has a long-term population of around 10,851. This has implied that Stranraer is considered Dumfries as well as Galloway's second-largest community. Stranraer functions as the administrative centre for the West Galloway Wigtownshire location of Dumfries as well as Galloway. It is recognized most commonly for having actually been a ferryboat port, which previously attached Scotland with Belfast and also Larne in Northern Ireland. The last solution was moved to Cairnryan in November 2011. The primary markets in the area are the ferry port, with such associated sectors as tourism and, a lot more typically, farming. The name is normally believed ahead from the Scottish Gaelic language, which converts as 'The Fat Nose', but which more prosaically may be rendered as "the wide cliff". An additional analysis would certainly connect the 2nd element in the name with Rerigonium, an ancient negotiation kept in mind by Ptolemy in this part of Britain. A person from Stranraer is referred to as a Stranraerarian, who is somebody from the initial, loch side, part of the town, including Sheuchan Street and Agnew Crescent. There are a variety of neighborhood tourist attractions. The Old Town Hall, constructed in 1776, is house to the Stranraer Museum, which consists of screens of Victorian Wigtownshire and also the town's polar explorers, Sir John Ross and also his nephew James Clark Ross. The town is additionally home to the North West Castle and also the very first resort worldwide with its own indoor curling ice rink. For every one of your residence improvements, make certain to identify credible professionals in Stranraer to make particular of quality.

Looking for Wooden decking in Stranraer?

Get free quotes from local carpenters

Get free quotes

How it works

Tell us about your Wooden decking project

Answer a few quick questions, so we can match you with professionals who can help.

Find up to 4 Carpenters in Stranraer

Get free, no-obligation quotes from 4 verified Carpenters working in Stranraer.

Hire with confidence

Compare customer reviews, services and prices, and choose the right professional for you.

Our reviews

Average

Would highly recommend

Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.

Good easy way to find a selection of…

Good easy way to find a selection of trades you need all in one place.

Love LeadsDoWork it's a big part of my …

Love LeadsDoWork it's a big part of my Business I would recommend to anyone

FAQs

How to build decking on a slope?
You might think that building decking on a slope is a no-go, but it’s actually a great way to help you make use of your garden when the ground is sloping. It will provide you with a level surface that you can BBQ on as well as dine alfresco without finding that your meal is rolling down the table. But how do you build decking on a slope? Our guide in the FAQ above, ‘How to build a raised deck’, is the perfect solution – but we’ll break it down here if you just want to get an idea of what’s involved. Dig out the area If you’re laying on soil or turf, you’ll need to dig it out. Dig down and remove all the turf from the area and ensure that there are no weeds or stones in the area you’re going to build your decking on. Since you’re building on a slope, it will be hard to get it level, but dig out to a depth of 50mm and lay weed-control fabric with gravel over the top. Add posts and set with concrete Make holes for posts and add them in, ensuring they’re longer than you need. Make sure they’re level, then fill the holes with a concrete mix to set them in place. Build the outer frame Make sure you always work at the top of the slope when you’re building your decking, and measure where the highest point of the decking will be. Secure the 4 sides of the outer frame and factor in a 2mm fall for every metre of decking so rainwater can run off. Add joists Secure joists along your frame at 400mm intervals. If you get to the last joist and there will be more than a 400mm gap left at the end, add in an extra one for support. Lay your deck boards Screw your deck boards to the joists, ensuring that the deck boards are running in the opposite direction to the joists. For timber boards, you need to make sure you leave an expansion gap of 5-8mm. These steps should give you an idea of whether you want to have a go at building decking on a slope, or whether you want to leave it to the pros.
How to fit composite decking?
Fitting composite decking is similar to installing timber decking, but there are some small differences in terms of the gaps you need to leave between boards and the screws you use. We’ll go through a quick guide to show you the process involved in fitting composite decking so you can decide whether it’s something you want to do yourself. Prepare the area Prepare the area according to our instructions in the previous FAQs – or you can use an existing patio or concrete base if you have one. Measure and mark out the area using chalk (if using an existing base). Assemble the decking frame Build the outer frame as we show in our FAQs above; if the area you have planned is longer than your joists, you’ll need to join them together. When you’ve built the frame and it’s secure, ensure that it’s at the right level for water runoff and add risers, slabs or treated off-cuts of timber at 500mm intervals if you need to. Add joists The spacing of your joists will depend on the type of design you have chosen for your composite decking. If you’re laying arched boards horizontally, you’ll need to space the joists 300mm apart. Lay your composite decking boards
  1. If you’ve not got an overhang or it’s a fixed deck, fit starter clips along the outside edge of the frame and secure with screws provided with the composite decking. If you are working with an overhang, put the first board into position not exceeding 25mm. If you’re adding a fascia, put an off-cut of board under the overhang so you know it’ll be flush with the fascia.
  2. Pre-drill all fixing points, measuring in 30mm from the edge of the board. Secure the board to the joist below with composite decking screws.
  3. Slide a hidden fastener clip in so it sits within the groove of the deck board. It needs to be in the centre of the joist to keep the boards secure and ensure an expansion gap of 6mm. Tighten the clips until just tight, and repeat so there’s a clip at every joist.
  4. Add the next board, ensuring that the fastener clips sit within the groove – make sure you don’t force it. Repeat step 3.
  5. Continue steps 3 and 4 until you’re at the final board, which you should secure in the same way as you did the first.
Add a fascia board If you’re adding a fascia, measure in 40mm from each end and add two guide marks: one at 40mm from the top and the other at 40mm from the bottom. Connect the marks, then mark at 300mm intervals down the board. Drill pilot holes, then put the fascia board into position. You need to make sure that there’s a 40mm ventilation gap between the bottom of the fascia and the ground. Ask someone to hold the board level until you’ve finished securing it with composite decking screws; you can get colour-matched ones so they don’t look unsightly at the end of your decking. Not so sure you want to carry out such a big project yourself? Get quotes from decking pros who will be able to fit composite decking much more quickly and easily.
How to build a raised deck?
Building a raised deck will take some time and is trickier than laying standard decking at ground level, but if you want to build decking on a slope or uneven ground it’s the best way to do it. If you do your research and follow instructions, you and a friend or family member can build a raised deck over a few days. Here’s a simplified guide of the steps you’ll need to take. Plan carefully It’s best to plan your raised deck by drawing it to scale on paper before you go and get supplies. This will help avoid wastage and making more cuts to timber than necessary. Prepare the area Prepare the area according to the instructions we give in the FAQ ‘How to lay decking’. However, because you’re building a raised deck, you’ll need to add posts:
  1. Place a post in the corner of the frame you created with the pegs and string. Measure and mark out 100mm from each side.
  2. Dig out this soil to a depth of 700mm (watch out for cables or pipes). You should have a 300 x 300mm hole. Repeat for the other 3 corners.
  3. Using a brick bolster, split a concrete block in two. Put a section of the block in each hole.
  4. Get a length of post longer than you need and place one in each hole. You can cut it down later.
  5. Create props on each post to hold them in place until you’re ready to add a cement mix. Check that they’re level. When you’re happy that they are, secure them in place with a concrete mix, making sure you create a slope in the concrete so that rainwater runs away from each post. When the concrete is set, remove the props.
  6. Create a string line around each corner post and find the centre point between each. Place a timber batten at each point, ensuring that they’re not spaced any more than 1500mm apart.
Make the outer frame
  1. Working from the corner where the deck will be at its highest above ground level, measure and mark on the post where the highest part of the frame will be.
  2. Measure from the far side of one post to the opposite and cut sections of joist to size. Line up a piece of joist with the mark you made and temporarily secure it. Factor in a 2mm fall for every metre of decking so rainwater can run off.
  3. Secure the frame to the other corner post, ensuring it’s at the right level. Do this for every side of the outer frame.
  4. Using 100mm coach screws with washers hanging on the end, secure each end of the four sections of frame.
  5. Mark out where the centre of the support posts will be and secure all of these posts to the frame, except the centre post.
  6. Add your central support joists. These should run in the same direction as the deck boards will run. You’ll need to measure from the inside of the frame on one side to the inside of the frame on the opposite side. Attach the joist in the same way as you did for the other posts. Repeat so the centre post is in between two sections of frame and secure the posts with concrete.
  7. Trim down all the posts to the correct height using a saw.
  8. Add your weed-control fabric and weigh down with gravel across the entire area.
Add your joists
  1. Measure 400mm from the centre of the outer frame and mark a line. This will be where the first joist is positioned. Repeat at 400mm intervals down the length of the frame – if the last one will be more than 400mm, add another joist to create enough support.
  2. Attach a joist hanger to each end of the joist.
  3. Place the joist in position so the centre lines up with the 400mm spacer mark.
  4. Secure using external grade screws once you’re happy that the joist is flush with the frame.
Lay your decking boards Refer to our FAQ on how to lay decking to see how you should attach your decking boards. Remember: Always treat cut ends and pilot holes with decking preservative to keep your decking in good condition for as long as possible. Building a raised deck isn’t a straightforward task. If you’d rather leave it to the professionals, get a range of quotes to help you get the best price and a high quality finish.
How much maintenance will a wooden deck need?

Properly installed wooden decking will not need a lot of maintenance. Most manufacturers recommend regularly brushing leaves and dirt off the deck, and a yearly cleaning and staining procedure. This will keep the wood in the best condition. Fluids and treatments are readily available from all DIY shops and stores.

Placholder Image

Other Top Projects in Stranraer

Related Projects

Customer Reviews

Overall rating:


Stranraer Wooden decking installers are rated 4.8 out of 5 based on 2 reviews of 19 pros.
The LeadsDoWork rating and review is an overall rating based on verified reviews and feedback from the customers with Wooden decking projects that have been connected with Wooden decking pros to help them. All Wooden decking contractors All Stranraer Wooden decking contractors

Useful Wooden decking Links

Moss removal from roof and gutter repair in Bath BA2 Full garage roof replacement in Leeds LS17 with budget-friendly materials Damp proofing for corridor and kitchen in Fort William, PH33 Roof felting replacement on a tiled semi Greenwich, Lewisham Ridge tiles, gutter, and roof leak repair in Telford, Shropshire Replace shower handles and kitchen mixer tap in Hayes, Middlesex Supply and Fit Multi-Room Air Conditioning System for Detached Property in Ormskirk Installing MultiMounted Air Conditioning System in Terraced Property in Dagenham Relocating Roof-Mounted Air Conditioning Unit on Detached Property in Enfield

Are you a carpenter in Stranraer?

We can help you get more Wooden decking work and boost your business.

Join today