Wooden Decking in Arlesey

Discover Wooden Decking Prices in Arlesey

Home > Gardening & Landscaping Projects > Wooden decking > Arlesey

Wooden Decking in Arlesey

Wooden decking is an increasingly fashionable choice for creating outdoor seating areas in gardens. Due to the natural beauty of wood, they can be very elegant areas that can be used year round by adding outside heating and lighting. Wooden decking is commonly fitted in locations in front of patio or French doors where they can create a smooth transition between inside and outside spaces. Wooden decking can come in any size or shape to complement any area. Curved designs or large areas joined by pathways can create a striking effect. Wooden decking is fairly easy to install and causes minimal disruption, especially when compared to other possibilities like patio or paving. It could even be installed over the top of a pre-existing patio. It is essential however to make sure that your wooden decking is structurally sound and able to take the weight of any furniture or plants that you would like to use on the decking. There is a range of types of wood that can be used in wooden decking. Usually decking is constructed from hardwood, but there are softwoods available that fulfil the durability requirements. As hardwood decking will require maintenance, which typically consists of yearly cleaning and staining for weather proofing, composite woods have become popular for use in wooden decking because they are more robust and require much less maintenance.

Average Wooden decking cost in Arlesey

The typical cost of Wooden decking is £1500. Costs can change based upon the materials and the firm hired. The upper price range can be as high as £1725. The material costs are commonly approximately £375

Average price per Wooden decking job in 2024

Avg. price low

Avg. price low
£1,125

Avg. price

Avg. price
£1,500

Avg. price high

Avg. price high
£1,725

£1900

£1425

£950

£475

£0

Prices based on actual Wooden decking costs for Arlesey, as reported by local LeadsDoWork members.

Wooden decking installation cost in Arlesey 2024

Labour cost £1,050
Material cost £375
Waste removal £75
Time frame: 1-4 days

Wooden decking searches in November 2024

Wooden decking Projects in Arlesey in October 2024

215

Requests for quotations in Arlesey in October 2024

0

Requests for Wooden decking quotations in Arlesey in October 2024. 0% change from September 2024.

0

Requests for Wooden decking quotations in Bedfordshire in October 2024. 0% change from September 2024.

Source: Numbers calculated based on the search volumes in major search engines

Wooden decking searches in cities and towns near Arlesey October 2024

Arlesey

Arlesey is a community and civil parish in Bedfordshire. It is near the border with Hertfordshire, about three miles north-west of Letchworth Garden City, 4 miles north of Hitchin and 6 miles southern of Biggleswade. Arlesey railway station provides services to London, Stevenage as well as Peterborough. The Domesday Book mentions Arlesey. The population of Arlesey was 5,584 in 2,344 houses in the 2011 census. In the census of 2011, 94.0% of individuals described themselves as white, 2.2% as having blended or several ethnic groups, 2.9% as being Oriental or British Oriental, and less than 1.0% as having an additional ethnic culture. In the same census, 55.8% described themselves as Christian, 34.6% described themselves as having no religion, 6.8% did not define a religious beliefs, 1.2% described themselves as Sikh, and 1.7% explained themselves as having a various religious beliefs.

Looking for Wooden decking in Arlesey?

Get free quotes from local carpenters

Get free quotes

Wooden decking pros in Arlesey

Stoneartuk LTD

14 review(s)
Based: in London, HA5 3TA

Hi my name is Martin from stone art uk ltd we are a local run landscaping company within the Pinner area we specialise in all types of driveways and patios please do not hesitate to visit us at are website or give us a call .

Latest review

Bob A., GU15
3

Garden | Decking in Camberley

no-price

Advanced Tree and Landscaping Services

15 review(s)
Based: in Watford, WD24 7LS

Tree surgery services also avaliable Find us on Thomson local and Google

Latest review

Michael F., HA8
4

Garden | Decking in Edgware

The job was well done, some of the finishing could have been better

How it works

Tell us about your Wooden decking project

Answer a few quick questions, so we can match you with professionals who can help.

Find up to 4 Carpenters in Arlesey

Get free, no-obligation quotes from 4 verified Carpenters working in Arlesey.

Hire with confidence

Compare customer reviews, services and prices, and choose the right professional for you.

Our reviews

Average

Would highly recommend

Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.

Good easy way to find a selection of…

Good easy way to find a selection of trades you need all in one place.

Love LeadsDoWork it's a big part of my …

Love LeadsDoWork it's a big part of my Business I would recommend to anyone

FAQs

How to build decking on a slope?
You might think that building decking on a slope is a no-go, but it’s actually a great way to help you make use of your garden when the ground is sloping. It will provide you with a level surface that you can BBQ on as well as dine alfresco without finding that your meal is rolling down the table. But how do you build decking on a slope? Our guide in the FAQ above, ‘How to build a raised deck’, is the perfect solution – but we’ll break it down here if you just want to get an idea of what’s involved. Dig out the area If you’re laying on soil or turf, you’ll need to dig it out. Dig down and remove all the turf from the area and ensure that there are no weeds or stones in the area you’re going to build your decking on. Since you’re building on a slope, it will be hard to get it level, but dig out to a depth of 50mm and lay weed-control fabric with gravel over the top. Add posts and set with concrete Make holes for posts and add them in, ensuring they’re longer than you need. Make sure they’re level, then fill the holes with a concrete mix to set them in place. Build the outer frame Make sure you always work at the top of the slope when you’re building your decking, and measure where the highest point of the decking will be. Secure the 4 sides of the outer frame and factor in a 2mm fall for every metre of decking so rainwater can run off. Add joists Secure joists along your frame at 400mm intervals. If you get to the last joist and there will be more than a 400mm gap left at the end, add in an extra one for support. Lay your deck boards Screw your deck boards to the joists, ensuring that the deck boards are running in the opposite direction to the joists. For timber boards, you need to make sure you leave an expansion gap of 5-8mm. These steps should give you an idea of whether you want to have a go at building decking on a slope, or whether you want to leave it to the pros.
How to lay decking on uneven ground?
There are two ways to lay decking on uneven ground. We’ve explained how to build a raised deck in our FAQ ‘How to build a raised deck’ above, and that’s great for uneven ground or sloped gardens. But there’s another way that you can lay decking on uneven ground if you don’t want a raised deck: you can create a level supporting base. We’ll go through the basics here. Materials you’ll need
  • Paving slabs – old or cheap ones are fine
  • Timber for the frame and legs
  • Type 1 MOT hardcore
How to lay decking on uneven ground
  1. Mark out the area as we explain in ‘How to lay decking’. Then, dig to 200mm below where you want to surface of the decking to be.
  2. Add a 50mm layer of hardcore and make sure it’s compact.
  3. Build the decking sub-frame as we describe in ‘How to build a deck frame’.
  4. Lay out paving slabs along the edges and in the centre of the area. This will help to spread the weight of the decking.
  5. Set the decking frame on the slabs, checking for high or low points and adding off-cuts of timber where needed. Don’t forget to sand and seal these off-cuts with decking preservative.
  6. Add your joists and then the deck boards, leaving the recommended gaps of expansion of between 5-8mm.
Building your decking on top of paving slabs is a good way to get it level, but you still may not be able to get as good a finish as if a professional did it. If you’re in any doubt, get in contact with some decking specialists and see what they would recommend.
How much is decking?
How much decking costs depends on the type of material you go for, how big you want your decking to be and where you live in the country. But typically, the cost of decking is between £1,200 - £1,800. The most popular material for decking is pre-treated softwood, which will set you back around £1,000 for 15m2. Hardwood is more expensive but is more durable, and will cost approximately £2,000 for the same amount. Homeowners are also beginning to choose composite decking, which is made from recycled plastic and wood fibres, and is low-maintenance and eco-friendly. This will cost around £1,600 for 15m2, while uPVC which is also a low-maintenance option costs around £600. People tend to choose composite over uPVC because it looks more like natural timber. If you’re a competent DIYer, you might want to have a go at laying decking yourself which will set you back around £1,000 for a standard softwood timber deck. We think it’s worth paying the extra £600 for a professional to lay your decking, since they will be able to do it much more quickly. If you do want to try it yourself, we recommend leaving at least a whole weekend open to do it, but it’s likely to take you longer. Factor in the possibility of having to take time off work to complete it and it might be more cost-effective to leave it to the pros.
How to make steps for a deck?
Unless you built a ground-level deck, you’re going to need steps to go with it. Check Building Regulations to see if you need to install handrails as well. It’s good practice to:
  • Have a step tread width of 900mm – if you don’t want them that wide, they should be no less than 760mm
  • Add a central step riser to stairs wider than 900mm to prevent them buckling
  • Add a step depth (the vertical distance between each step) of between 150 and 180mm if building your own riser, so the steps are at a comfortable depth
Getting started To build your steps for the deck, you’ll need:
  • Step treads (the actual step themselves)
  • Step risers
  • Coach screws
  • Deck screws
  • Saw
  • Drill
Make the steps for your deck
  1. Make sure the ground where you want to put your steps is level and firm. If it’s not, consider laying concrete or paving slabs to provide a secure surface for your steps to sit so they don’t sink.
  2. Grab some joist off-cuts and cut them to the same width as your step treads. Attach them to the step risers at the top and bottom using countersunk coach screws.
  3. Place the steps against the sub-frame of the deck; if you’ve put slabs down for support, make sure the steps sit in the middle of them. The longest edge of the stair riser should be on the slabs, and the short edge against the deck. Drill pilot holes through the step and sub-frame joist, then screw the step to the sub-frame with more coach screws.
  4. After drilling pilot holes, screw the treads into the risers at each end with deck screws.
  5. If you don’t want gaps between each stair, you can add joist off-cuts or deck boards. Measure the height and depth of the gap, then screw the off-cut or board into the step riser with two screws at each end.
Placholder Image

Other Top Projects in Arlesey

Are you a carpenter in Arlesey?

We can help you get more Wooden decking work and boost your business.

Join today