Question 1

What to put over a broken window?

Accepted Answer

A broken window is a nuisance and an unwanted expense, and it can often happen at the worst times, like overnight when installers aren’t available or when the weather is very bad. So you might need to put something over your broken window as a temporary measure before someone can come and replace it – but what should you use? If you’ve got a small crack, you could try using some masking tape. Cover the entire crack with the tape making sure that there is extra tape at each end of the crack. This will help to prevent the crack from growing further. However, this isn’t going to work on large impact cracks or shattered windows. For a shattered window, you need to make sure you remove all the remaining glass as the shards could easily cut someone. To make a broken window like this safe, you’ll need: Thick gloves A hammer A broom A vacuum cleaner Thick-soled shoes Safety goggles Put your gloves on and use the hammer to remove the rest of the glass. Make sure you hit the glass away from you. Using the broom, sweep away any loose glass from the area, making sure you do both inside and outside. Use your vacuum cleaner to remove any small pieces of glass that you might not have been able to see. Once you’ve cleared up the mess, you’ll want to cover your broken window with plastic and tape. It’s only a temporary measure so make sure you get in touch with a professional as soon as possible. Cut some heavy-duty plastic to fit the entire window. Using duct tape, secure the plastic over the window and make sure all the sides are sealed properly. It’s best to ensure that the plastic stays taught over the frame so it doesn’t get caught by the wind. Make sure you get in touch with a glazier or window installer as soon as you can – you'll notice a draught very quickly and someone could easily come and rip the plastic off. If you’re very worried about this you might want to add a chipboard over the top to make it more secure.

Question 2

How to fix a cracked glass window?

Accepted Answer

You can end up with a cracked glass window in a few ways. The most common one is when a rogue stone in the lawnmower hits the window or someone’s cricket or tennis game goes wrong and you end up with a ball through the window. Youi often end up with a ‘bullseye’ type crack that expands out from the point of impact. You can also get pressure and stress cracks from intense fluctuations in pressure and temperature. Unfortunately, there’s no way you can permanently fix cracked windows without replacing the entire sealed unit. An installer can replace a cracked glass window in less than an hour simply by taking out the sealed unit (the two panes of glass in double glazed windows) and replacing it with a new one. It costs an average of £110, but you could try to do it yourself for around £55. But what if you can’t get an installer to fix your window straight away? There is a DIY method you could try. As a temporary fix for your glass window, you can use a solvent-based adhesive like epoxy which will keep the glass intact and prevent further damage. You’ll also need: Washing up liquid Glass cleaner A lint-free cloth or rag A putty knife A paper plate Acetone First, you’ll want to clean the glass using the washing up liquid and a damp cloth to remove any dust or oils. Leave it for a few minutes to dry, then create a mixture of epoxy by combining the hardener and the resin and stirring it on a paper plate. Using the putty knife, spread the mixture on the cracks, making sure you press gently to fill them. Leave it for at least 5 minutes to dry, then get rid of any excess by using some acetone on a dry cloth. Clean the window using some glass cleaner and another dry cloth, and you should have a temporary fix!

Question 3

Can the glass in a double glazed window be replaced?

Accepted Answer

Yes, the glass in a double glazed window can be replaced. The glass in a window, or sealed unit to use its proper name, is not permanently attached to your window frames so if it gets damaged but your frames are still intact, there’s no need to replace the whole window. The glass in your double glazed window might need to be replaced due to: Impact from a stone or other object smashing the glass in a ‘bullseye’ effect The result of a break-in Extreme weather or changes in pressure causing a crack The sealed unit being ‘blown’, meaning that it’s no longer energy efficient due to air leaking out A lot of window installers will replace the glass in your double glazing for you, but you might need to get quotes from specialist glaziers too. Glaziers deal purely with the glass in windows rather than installing entire frames. It won’t take a professional very long to replace the glass in your window. They will remove the beading from around the window with a pallet knife or chisel, leaving the top one until last to keep the sealed unit stable. Then, they simply lift out the glass carefully and will discuss with you whether the removal of the old sealed unit is included in their quote. Next, they will brush away any dust and debris that’s made its way into the frame and place spacers at the bottom. They will then lift the new glass into the frame, making sure it’s completely square. When they’re happy, they’ll remove the spacers and replace the beading back in reverse order. You’ll notice the replacement glass in your new window straight away as draughts should be eliminated and you’ll be able to see clearly again!

Question 4

How to measure the glass for a window replacement?

Accepted Answer

If the glass in your window has been damaged, you might only need to replace that rather than your whole window frame. Common reasons for needing to replace the glass in your window include: The glass has smashed from an impact such as a stone hitting it from a lawnmower You have been broken into and suspects used the window to gain entry The glass has blown (lost its airtightness) from constant water build-up around the seals, which is common in bathrooms Extreme weather or pressure changes have caused a crack If your frames are still intact and there’s nothing wrong with your window’s locks or trims, there’s no reason why you can’t just replace the sealed unit in your window. To help with the quotation process, a window installer may ask you to measure the glass for your window replacement. It’s pretty simple to just measure the sealed unit inside your window. There are just 3 steps you need to take: Including the beading (the plastic and rubber seals around the windows that can be removed), measure the width of the window frame. Do the same for the height of the window, making sure you include the beading. Then, take 10mm off each measurement, and you have the approximate size of your glass. A reputable window installer will still make their own measurements before confirming the size of the glass in your window and going ahead and ordering the replacement. Make sure you get a range of quotes from local and national installers so you can compare the price and their quotation process.

Avg. price low	Avg. price low £54
Avg. price	Avg. price £100
Avg. price high	Avg. price high £144

	Labour cost	£53
	Material cost	£19
	Waste removal	£4

Replacement Glass (Glazing) in Bures

Obtain Replacement Glass (Glazing) Prices in Bures

Replacement Glass (Glazing) in Bures

Average Glaziers cost in Bures

Average price per Glaziers job in 2025

Glaziers installation cost in Bures 2025

Glaziers searches in February 2025

Glaziers Projects in Bures in January 2025

90

0

0

Glaziers searches in cities and towns near Bures January 2025

Glaziers near you

Bures

Looking for Glaziers in Bures?

Get free quotes from local window installers

Local & reliable window installers near me

Tell us about your glaziers project

Find up to 4 window installers in Bures

Hire with confidence

Our reviews

Average

Would highly recommend

Good easy way to find a selection of…

Love LeadsDoWork it's a big part of my …

FAQs

Other Top Projects in Bures

Customer Reviews

Are you a window installer in Bures?