Flooring | Tile | Fitting
Prescot - L35
Enquiry from: Elaine W
Start Date: Immediate
Property type: Other, Property owner: Owner, Number of rooms to be tiled: one, Work description: Kitchen floor tiled
-->
Over 0 reviews & an average rating of 0/5 stars, you'll find the right pro
Use the shortlist button to select up to 4 tradespeople, enter your project details and press send
Get up to 4 quotes from local Tilers near you
Prescot - L35
Enquiry from: Elaine W
Start Date: Immediate
Property type: Other, Property owner: Owner, Number of rooms to be tiled: one, Work description: Kitchen floor tiled
Ellesmere Port - CH65
Enquiry from: Carole J
Start Date: Immediate
i need some tiles putting up inside a shower cubicle to enable a plumber to fit a new shower. are you the property owner: owner of the property property type: semi detached how many bedrooms do you h...
Wirral - CH63
Enquiry from: Andrea H
Start Date: Immediate
Kitchen floor, remove existing tile floor, replace with new tiled kitchen floor
Liverpool - L26
Enquiry from: Connlaoth M
Start Date: Immediate
Need to do tiling round bath and fit a shower into cavity wall, new build.
Wirral - CH63
Enquiry from: Tony R
Start Date: Immediate
instal shower tray tile floor and walls tank floor all materials are ready on site including tiles,trim,tray,porcelain toilet, sink and shower are you the property owner: owner of the property propert...
Frodsham - WA6
Enquiry from: Joanna B
Start Date: Immediate
Looking for a cheap suspended ceiling / tiles for a converted garage room. It will need to be on stud timber beams due to sloping roof. The area is 270x270cm.
Runcorn - WA7
Enquiry from: Michael K
Start Date: Immediate
Tile kitchen floor measures 11ft x10ft nTiles to be lade are 60cm x 60cm 26 in all cuts there r no intrecrit cuts - : - : - : Are you the property owner: Owner of the property
Runcorn - WA7
Enquiry from: David P
Start Date: Immediate
4m2 room to be tiled. Tiles already purchased.
Ellesmere Port - CH65
Enquiry from: Isabella B
Start Date: Immediate
Customer visited the mytilingprices.co.uk site and submitted an enquiry. Property type: Semi detached, Property owner: Owner, Number of rooms to be tiled: one, Work description: Between workin...
Runcorn - WA7
Enquiry from: K
Start Date: Immediate
Putting up 12 tiles cutting them from 16 by 10inch too 13 by 8inch and regrouting adding mould resistant grout
Warrington - WA4
Enquiry from: Terry G
Start Date: Less than one month
to tile a kitchen/utility floor after new kitchen fitted which is almost complete Are you the property owner: Owner of the property Property Type: Detached How many rooms are you looking to have tiles...
Widnes - WA8
Enquiry from: Ste C
Start Date: Immediate
Tiling of kitchen floor, around 16sq ft
Liverpool - L24
Enquiry from: Andrew H
Start Date: Immediate
Customer visited the mytilingprices.co.uk site and submitted an enquiry. Property type: Terrace, Property owner: Owner, Number of rooms to be tiled: two, Work description: Tile bathroom, hallway flo...
Liverpool - L24
Enquiry from: Andrew H
Start Date: Immediate
Customer visited the mytilingprices.co.uk site and submitted an enquiry. Property type: Terrace, Property owner: Owner, Number of rooms to be tiled: two, Work description: Tile bathroom, hallway flo...
Liverpool - L19
Enquiry from: Peter D
Start Date: Immediate
Customer visited the mytilingprices.co.uk site and submitted an enquiry. Property type: Semi detached, Property owner: Owner, Number of rooms to be tiled: one, Work description: New ensuite. Tile on...
Liverpool - L19
Enquiry from: Peter D
Start Date: Immediate
Customer visited the mytilingprices.co.uk site and submitted an enquiry. Property type: Semi detached, Property owner: Owner, Number of rooms to be tiled: one, Work description: New ensuite. Tile on...
Frodsham - WA6
Enquiry from: Julie G
Start Date: Immediate
Customer visited the mytilingprices.co.uk site and submitted an enquiry. Property type: Detached, Property owner: Owner, Number of rooms to be tiled: one, Work description: Hallway
Liverpool - L26
Enquiry from: Craig D
Start Date: Immediate
Customer visited the mytilingprices.co.uk site and submitted an enquiry. Property type: Semi detached, Property owner: Owner, Number of rooms to be tiled: one, Work description: I have bought 450-45...
Ellesmere Port - CH65
Enquiry from: Scott B
Start Date: Immediate
Two Small interview rooms have lost ceiling tiles due to water damage. We would like a quotes for repairs, we would also like a quote for the damaged tiles across the rest of the office Are you the ...
Liverpool - L19
Enquiry from: Rosa L
Start Date: Immediate
Customer visited the mytilingprices.co.uk site and submitted an enquiry. Property type: Semi detached, Property owner: Owner, Number of rooms to be tiled: one, Work description: Small downstairs toi...
How much do Tilers in Prescot cost?
Costs for Tilers around Prescot can fluctuate relying on the type of work that you want to have actually done in your home. It's the question we are asked a lot "how much do Tilers in Prescot cost?". It's generally better to have an idea of how much a Tiler are going to likely charge for their services. Prices are going to fluctuate based upon the products and the tradesman chosen. The table reveals the kinds of work that Tilers typically do and also the standard cost series of these tasks. Some jobs take longer to complete than others so costs do vary by task.
Tasks that Tilers in Prescot can do:
Tiler job | Tiler cost in 2024 |
---|---|
Floor tile fitting in Prescot | £375-£575 |
Floor tiling in Prescot | £1,125-£1,725 |
Wall tile fitting in Prescot | £375-£575 |
Wall tiling in Prescot | £525-£805 |
Kitchen Tiling in Prescot | £525-£805 |
Kitchen fitters are often trained carpenters and not all will offer tiling but many will know a tiler that they have worked with in the past. If you are looking to get your kitchen retiled without fitting a new kitchen when it's worth talking to tilers directly to get a range of prices.
It's useful to know in advance what tiles you like, a visit to your local tile store and either pick up a brochure or take some photos. It's probably better not to purchase the tiles at this moment though as often your appointed tiler may be able to get you a better price for the tiles or recommend alternatives.
Are you interested in fitting tiles in your home or office? If yes, then you’d probably want to know the total cost of getting the project over the line. And being fully aware every job is unique, having a cost per square metre to work with will give you a more accurate price estimation for the overall project.
First and foremost, the cost of a tiler depends on a wide range of factors such as the type of floor tiles and the size of the area. The cheapest of them all is the vinyl tiles which can be easily cut through and waterproof when properly sealed. As a result, making them a better fit for bathroom floors. Other kinds of tiles include ceramic tiles, mosaic tiles, quarry tiles and porcelain tiles. Each of the types have their own unique qualities including the quarry tiles’ durability and the afore-mentioned vinyl tiles’ waterproof qualities.
Having in mind that the major part of your tiles cost largely depends on the size of the area and the type of tile selected, you can then go ahead to contact your preferred tiling professional for an installation quote. The average price of bathroom tiles installation ranges about £20 to £25 per square metre. Meanwhile for a kitchen floor tiling project, the cost should range between £20 to £50 per square metre.
Finding a tiling professional you can rely on to complete your project and deliver a top quality job while also offering a very competitive price can be almost impossible. The professional you use greatly determines the price of your tiling effort, so there’s the need to review various professionals before making a decision.
How To Remove Tile Adhesive From Wall
Do you feel your tile design choices are outdated and want to replace it with a more stylish one? Or perhaps you’re just struggling to remove the old tile adhesive from your wall. Putting on a new wallpaper or repainting your wall might be a cup of tea, but retiling is surely a different experience altogether. After detaching every single piece of tile from the wall, you’ll still have the strongly glued adhesive to battle with. If not done properly, you may as well damage the wall which will trigger a new additional cost for repair. We’d recommend you get a professional helping hand for the best results if you’re without a proper training or experience. However, this guide will teach you everything you need to know about the process. Let’s get started!
Materials Required
• Steamer
• Protective sheets
• 4-inch scraper
• Clean cloth
• Protective gear - face mask, eye goggles, gloves.
Tile Adhesive Removal Process
• Cover The Floor
Ensure that the floor is well covered to collect the residues falling off from the wall with some protective sheets.
• Heat Up The Adhesive
Using the wallpaper steamer, heat up the adhesive to make it a bit loose and softer. Do this by slowly moving the steamer around and ensure not to stay on one spot for too long.
• Scrape Off The Mortar
When you can tell the adhesive is properly softened, use the 4 inch scraper to wipe it off the wall. Do this until all the adhesive has been completely removed.
• Clear Out The Fallen Residue
Clean up any mortar that has fallen on the floor.
After the tile adhesive removal, your wall may need to be skimmed depending on its state. This is to put the surface in a good and flat condition before installing the new tiles. The wall may also need to be re-plastered if the adhesive is extremely strong.
How To Tile A Kitchen Floor
Tiling your kitchen floor can seem a daunting task at first glance, but is a skill that can be mastered after a couple of practices. With this simple guide, you will find it easier to satisfy your kitchen floor tiling needs.
lPrepare The Subfloor
• Ensure the subfloor is very secure to support both the tile and the people working across it.
• If necessary, you can strengthen the kitchen floor with the help of a vinyl, heavy felt or any other good backer board.
• After successfully securing the floor, proceed to clear out all dust and dirt.
lMix The Mortar
• Mix a thinset mortar be referring to the instructions on the package. ( Mix only the quantity you can apply within 30 minutes).
• Once the mixture looks similar to the thickness of mayonnaise, allow it to rest for about 10 minutes before application.
lApply The Mortar
• Apply a thin layer of mortar
• Do not cover extensive areas as the mortar can become very dry.
• Spread the mortar with a trowel in curved patterns to make it flat on the floor.
lSet The Tile
• Set down the tile slowly, apply a little pressure until its holds firmly to the surface. ( Apply a consistent amount of pressure throughout to ensure equal heights for all the tiles)
• Continue with the process until all full tiles are well positioned
lCut The Tiles
• Once all the full tile pieces are in place, start cutting to cover the edges requiring smaller tile pieces.
• Take accurate measurements of the outer edges needing smaller tile pieces.
• Cut the tile pieces to fit the measurement taken with the help of a wet saw or hand tile cutter.
lGrouting
• Remove all spacers and mortar residues and lay the grout
• Apply the grout along the tiles’ seams with a grout float
• Clean out excess grout with a damp sponge after leaving it to dry for about 30 minutes
• Once the grout is fully dried, apply the sealer (the drying process normally takes within 3 to 4 days).
For the best results, it’s advisable to contact a tiling professional for help when it comes to kitchen floor tiling especially if you have no training or prior experience. This way, you can get the best quality and also avoid the regrettable mistakes and extra costs that’s very common with newbies.
How To Tile A Floor
Are you interested in having a tiled floor in your residential or commercial space? There are so many benefits that comes with installing tiles and that’s why so many home or property owners are considering it. Not only do they increase the visual appeal of the property, but they’re also resistant to moisture helping to increase the durability of the house, whether it’s wall or floor tiles. So if you wish to lay tiles for your house, this guide will help put you in the right direction, ensuring you get it right, the first time.
Floor Tiles Installation Procedures
lFloor Preparation
• The first step is to prepare the floor by moving all objects like mortar, adhesives and more.
• Use concrete patching compound to fill ill low spots and cracks, until the floor is levelled.
• Ensure the floor is dry and clean.
lPattern Layout
• Take the measurement of each wall’s length while also taking into account the room’s diagonals.
• To help place the tiles in an orderly manner, make use of a chalk to mark down lines on the levelled surface in question and ensure it’s parallel to the walls.
lAdhesive Preparation
• Mix the appropriate amount of water with the adhesive (bonding agent).
• The mixture should be toothpaste-like thick to ensure the durability of the tiles.
lTiles Placement
• Depending on the tile’s size, evenly spread the mortar on the floor using a notched trowel.
• Lay the first tile on the bonding agent (adhesive or mortar) and apply a gentle and little pressure on the tile.
• Repeat the technique for other tiles using plastic spacers to ensure the edges and corners are properly aligned.
lTiles Cutting
• Cut the tiles (if necessary) with the help of a wet saw or scoring cutter featuring a diamond-tripped blade.
lGrout Application
• Filling of the tiles’ gap is done using the grout. It can be applied to the joints with a rubber float.
• After application, allow the grout to set up for some minutes.
• Use sponge and a bucket of water to clear out any adhesive leftover.
lGrout Sealing
• Use a foam brush or applicator bottle for the sealants’ application.
• Clean out excess sealer within 10 minutes.
Floor tiling can be a very tricky activity that can end up being disastrous, especially when done by a novice. Unless you have prior experience or well-trained, it would be advisable to employ the services of a seasoned professional - it’ll save you lots of time, money and guarantee a top quality job is done.
Kitchen floor tiles are a very popular choice for several reasons. They’re durable, visually appealing, resistant to moisture and stain and also relatively easy to maintain and install especially when compare to wall tiles. This is a task that can be done by any competent DIYer but requires a lot of patience as well as confidence. If you lack these attributes, then we’d recommend that you hire a professional floor tiler who can guarantee the best results the first time. In this article we’ll take you through the kitchen floor tiling process. Let’s get started!
• Prepare The Subfloor
✓ Ensure the subfloor is very secure to support both the tile and the people working across it.
✓ If necessary, you can strengthen the kitchen floor with the help of a vinyl, heavy felt or any other good backer board.
✓ After successfully securing the floor, proceed to clear out all dust and dirt.
• Mix The Mortar
✓ Mix a thinset mortar be referring to the instructions on the package. ( Mix only the quantity you can apply within 30 minutes).
✓ Once the mixture looks similar to the thickness of mayonnaise, allow it to rest for about 10 minutes before application.
• Apply The Mortar
✓ Apply a thin layer of mortar
✓ Do not cover extensive areas as the mortar can become very dry.
✓ Spread the mortar with a trowel in curved patterns to make it flat on the floor.
• Set The Tile
✓ Set down the tile slowly, apply a little pressure until its holds firmly to the surface. ( Apply a consistent amount of pressure throughout to ensure equal heights for all the tiles)
✓ Continue with the process until all full tiles are well positioned
• Cut The Tiles
✓ Once all the full tile pieces are in place, start cutting to cover the edges requiring smaller tile pieces.
✓ Take accurate measurements of the outer edges needing smaller tile pieces.
✓ Cut the tile pieces to fit the measurement taken with the help of a wet saw or hand tile cutter.
• Grouting
✓ Remove all spacers and mortar residues and lay the grout
✓ Apply the grout along the tiles’ seams with a grout float
✓ Clean out excess grout with a damp sponge after leaving it to dry for about 30 minutes
✓ Once the grout is fully dried, apply the sealer (the drying process normally takes within 3 to 4 days).
Can You Tile Over Floor Tiles?
Are you about to tackle a refurbishment or renovation project? If yes, then you might be worried about the removal of your old tiles before installing the new ones. Being fully aware that this process can be time and money consuming, it can only make sense to consider whether you can tile on existing tiles. The answer is yes, however, there are a few details you must take into account when embarking on this cost-effective journey. Here’s our advice:
lSelect The New Tiles
• Take into consideration the surface behind the tiles and the weight it’ll be able to withstand.
• For plasterboard, the surface can withstand about 30kg to 32kg per m2 (28.5kg of tile/square metre and 2.5kg to 3.5kg of adhesive and grout).
• For skimmed plasterboard, the surface can hold about 18kg to 20kg per m2 ( 16kg of tile/square metre and 2.5kg to 4kg of adhesive and grout )
• Consider the existing tiles, if heavy enough, then your choice for the new tiles should very light.
lPrepare Old Tiles
• Confirm that the old tiles are well glued to the substrate.
• Check that the tiles are level. If not, use a grinder to flatten out any humps.
• Remove the sealer for the old tiles, if any.
• Clear out all dust and dirt.
lLay New Tiles
• Spread a layer of flexible adhesive.
• Lay the new tiles
lFinish The Project
• Fill the joints with an appropriate tile grout.
• Seal the edges with a sealant.
It’s as simple as that! However, it must be said that if you’re lacking the appropriate training or experience to pull this off, then you probably would not want the first trial on your prized asset. For a top quality job and to avoid unnecessary costs, you can reach out to a tiling professional for help.
Due to the plethora of benefits ceramic floor tiles are able to provide, there’s little surprise they’re a popular flooring choice amongst homeowners. Not only are they durable and good looking, but they’re also resistant to both moisture and stains. Hence, they’re very easy to maintain and with skill, confidence and patience, can also be relatively easy to install especially when compared to wall tiles which is a vertical surface.
If you’re looking to install ceramic floor tiles by yourself, you’ve come to the right place. This is a task any confident and patient DIYer should be able to do with ease. However if you’re not confident enough to pull this off, it’s advisable to get a professional for help. In this guide, we’ll walk you through the process of fitting ceramic floor tiles.
✓ Prepare the subfloor. This involves making sure the layout is even from side to side on both directions, picking up loose tiles and setting them aside.
✓ Spread a thin set of mortar over a 3x3 foot section at the intersection of the layout lines using a notched trowel.
✓ Start to lay the tiles from the centre point of the two layout lines. Simply set the individual tile into the mortar and tap gently with a rubber mallet. Ensure to use spacers at the corner of each tile to maintain an even grout line between the tiles.
✓ Continue spreading the mortar and complete laying of the tiles
✓ Once all the tiles have been perfectly fitted in the mortar, proceed to mix the grout according to the manufacturer’s instructions and apply it with the use of a rubber grout float.
✓ Wipe clear any excess grout with a grout sponge. Once done, let the grout dry up a bit, then remove the haze that comes up.
Answer a few quick questions to help us match you with the right Tiler
Receive no-obligation quotes from 4 Tilers working in Prescot.
Compare prices, customer reviews and services, and hire the right Tiler.
View our open Tiler jobs near you
Join today