Find a Tiler you can trust in Leven.

Choose from 14 Tilers, all rated by people like you.

Over 3 reviews & an average rating of 4.8/5 stars, you'll find the right pro

Choose and shortlist

Use the shortlist button to select up to 4 tradespeople, enter your project details and press send

or

Keen to get on with the job?

Get up to 4 quotes from local Tilers near you

View Shortlist

Recent Tiler Enquiries

20 Aug

Flooring | Tile

Leven - KY8

Enquiry from: Bill R

Start Date: Immediate

need tile replaced on my floor i have spare tiles. are you the property owner: owner of the property property type: semi detached how many rooms are you looking to have tiles fitted to: 3-4 rooms ple...

Post a similar request >

17 Feb

Flooring | Tile | Fitting

Cowdenbeath, Kelty - KY4

Enquiry from: Steven B

Start Date: Immediate

looking to get my en-suite and bathroom floor tiled, coverage for the both areas are 4m2

Post a similar request >

25 Jan

Interior work | Tile | Wall

Kirkcaldy - KY1

Enquiry from: Andrew S

Start Date: Immediate

3ft section of tiles replaced are you the property owner: owner of the property how many bedrooms do you have: 1-2 bedrooms what level of service do you require: supply and fit how many walls are you ...

Post a similar request >

19 Jul

Flooring | Tile

Anstruther - KY10

Enquiry from: Adrian P

Start Date: Immediate

50 m2 taking walls.new buliding

Post a similar request >

13 Aug

Interior work | Tile | Wall

Glenrothes - KY6

Enquiry from: Amanda G

Start Date: Immediate

Replacement ceiling tiles

Post a similar request >

30 May

Flooring | Tile | Fitting

St. Andrews - KY16

Enquiry from: Nayoung Y

Start Date: Immediate

Replacing three damaged laminate floorboards in a middle of a room. The new floorboards must match the current ones.

Post a similar request >

28 Jun

Flooring | Tile

Glenrothes - KY7

Enquiry from: Caroline B

Start Date: 1 to 3 months

Approx 10sqm L shaped hallway with click vinyl flooring. We have oak skirting, so up to skirting or under? Karndean current,my down. Possibly replace original wood door bars x 8 with chrome. Are yo...

Post a similar request >

16 Oct

Flooring | Tile | Fitting

Glenrothes - KY7

Enquiry from: Suki B

Start Date: 1 to 3 months

Customer visited the mytilingprices.co.uk site and submitted an enquiry. Property type: Detached, Property owner: Owner, Number of rooms to be tiled: one, Work description: Floor tiles to be put dow...

Post a similar request >

07 Jul

Flooring | Tile

Lochgelly - KY5

Enquiry from: Allan G

Start Date: Immediate

25 metres of floor tiles for a livingroom

Post a similar request >

28 Mar

Flooring | Tile

St. Andrews - KY16

Enquiry from: Patricia T

Start Date: Immediate

Customer visited the myflooringprices.co.uk site and submitted an enquiry. Property owner: Tenant (with permission), Work description: Carpets, Laminate and floor tiles

Post a similar request >

22 Feb

Flooring | Tile

Glenrothes - KY6

Enquiry from: Kevin F

Start Date: Immediate

looking for quote to supply and fit approx 13 sq metres of vinyl flooring in kitchen not looking for anything too expensive - rental property, just replacing as ripped by puppy must be black slate/t...

Post a similar request >

24 Nov

Flooring | Tile | Fitting

Cupar - KY14

Enquiry from: Essie L

Start Date: Immediate

Customer visited the mytilingprices.co.uk site and submitted an enquiry. Property type: Semi detached, Property owner: Owner, Number of rooms to be tiled: one, Work description: kitchen floor. 14 m ...

Post a similar request >

13 Nov

Flooring | Tile | Fitting

St. Andrews - KY16

Enquiry from: Aileen A

Start Date: Immediate

Customer visited the mytilingprices.co.uk site and submitted an enquiry. Property type: Detached, Property owner: Owner, Number of rooms to be tiled: one, Work description: To uplift present tiles a...

Post a similar request >

20 Apr

Flooring | Tile | Fitting

Glenrothes - KY6

Enquiry from: Eddie S

Start Date: Immediate

Property type: Terrace, Property owner: Owner, Number of rooms to be tiled: three plus, Work description: remove existing vinyl flooring and replace with floor tiles

Post a similar request >

16 Feb

Flooring | Tile

Cupar - KY15

Enquiry from: Varrie M

Start Date: Immediate

Remove old floor tiles and lay new ones in the hallway and small downstairs toilet Homeowner Supplied and fitted Please contact to appoint

Post a similar request >

29 Jan

Flooring | Tile

Glenrothes - KY7

Enquiry from: Marion M

Start Date: Immediate

Home Owner Tiling for Kitchen Floor Supply and Lay Please Call to Appoint

Post a similar request >

How much do Tiler services cost?

How much do Tilers in Leven charge?
Costs for Tilers around Leven can vary relying on the type of service that you require to have actually performed in your house. It's the question we are asked a lot "how much do Tilers in Leven cost?". It's often better to have an idea of how much a Tiler will likely charge for their services. Prices will certainly fluctuate based on the materials and the tradesperson selected. The list shows the kinds of task that Tilers normally do and also the standard price variety of these jobs. Some projects take longer to finish than others so prices do vary by job.

Tasks that Tilers in Leven can do:

View our Tiler cost guide View our Tiler advice

The average price
of a Tiler in Leven is:

£780

Tiler job Tiler cost in 2024
Floor tile fitting in Leven £375-£575
Floor tiling in Leven £1,125-£1,725
Wall tile fitting in Leven £375-£575
Wall tiling in Leven £525-£805
Kitchen Tiling in Leven £525-£805

Related Tiler searches in Leven

Tiler FAQs

How much do tilers charge per square metre?

Are you interested in fitting tiles in your home or office? If yes, then you’d probably want to know the total cost of getting the project over the line. And being fully aware every job is unique, having a cost per square metre to work with will give you a more accurate price estimation for the overall project. 

First and foremost, the cost of a tiler depends on a wide range of factors such as the type of floor tiles and the size of the area. The cheapest of them all is the vinyl tiles which can be easily cut through and waterproof when properly sealed. As a result, making them a better fit for bathroom floors. Other kinds of tiles include ceramic tiles, mosaic tiles, quarry tiles and porcelain tiles. Each of the types have their own unique qualities including the quarry tiles’ durability and the afore-mentioned vinyl tiles’ waterproof qualities.

Having in mind that the major part of your tiles cost largely depends on the size of the area and the type of tile selected, you can then go ahead to contact your preferred tiling professional for an installation quote. The average price of bathroom tiles installation ranges about £20 to £25 per square metre. Meanwhile for a kitchen floor tiling project, the cost should range between £20 to £50 per square metre.

Finding a tiling professional you can rely on to complete your project and deliver a top quality job while also offering a very competitive price can be almost impossible. The professional you use greatly determines the price of your tiling effort, so there’s the need to review various professionals before making a decision.

Do Kitchen Fitters do tiling?

Kitchen fitters are often trained carpenters and not all will offer tiling but many will know a tiler that they have worked with in the past. If you are looking to get your kitchen retiled without fitting a new kitchen when it's worth talking to tilers directly to get a range of prices.

It's useful to know in advance what tiles you like, a visit to your local tile store and either pick up a brochure or take some photos. It's probably better not to purchase the tiles at this moment though as often your appointed tiler may be able to get you a better price for the tiles or recommend alternatives. 

how to remove old tiles from wall

When your tiles get old and starts to lose its curb appeal and deteriorate, it’s certainly time to have it removed. When it comes to old wall tiles removal, you have two options which is either you do it yourself or call in a professional – with the latter being more advisable. However, if you wish to save some money on installation and carry out the task yourself, then you’ve come to the right place!

Firstly, you have to know that the bonding agent or adhesive usually incorporated to hold a tile against the wall are always very strong or else you’ll find your tiles peeling off. As a result, to have them removed is not the easiest of tasks and bashing them with a hammer, will only have them broken leaving you with the task of having to scrape off the pieces. A better and much easier approach to removing tiles from a wall will be to pry them off one after the other. So how do you go about this? Let’s have a look!

  1. Safety First, Then Remove The First Tile
    Wear a protective eye goggle and gloves.
  2. Break up the grout around a tile located atthe wall’s centre using a putty knife and hammer.
  3. Place the putty knife under the the tile and gently it with the hammer.
  4. Remove The Remaining Tiles
    By tapping and prying using the tools - hammer and putty knife, wipe off all the tiles in the vertical row.
  5. Once done, continue to detaching the tiles in the adjacent rows until you’re able to open a wallboard section that’s around 12 inches wide and does not obstruct a stud.
  6. Use a keyhole blade to poke it through the wallboard.
  7. With the help of a reciprocating saw, cut out the wallboard’s section.
  8. Cut The Fasteners
    Using a metal-cutting blade, cut te wallboard-holding fasteners. Make sure the fasteners holding the wallboard to the top and bottom plates of the wall are both detached.
  9. Remove All Wallboard Sections
    Using a similar approach, gently remove the other sections of the wallboard.
  10. Once completed, you can easily sweep the tiles’ broken pieces.
  11. Finally, vaccum the grout dust to ensure the work is neatly done.

 

If you lack a proper training or experience, taking off your tiles from a wall is best left to a skilled professional for the best results and to prevent potential damages which can lead to additional costs.

how best to fit kitchen wall tiles?

Tiling a kitchen wall can seem like an easy task until you get started. Errors made will forever be evident for everyone to see unless you’re prepared to spend some extra bucks. When done right, it can actually be a very satisfying project, but don’t even think about rushing into it. If you lack a proper training or experience, it’s advisable to leave the task to a skilled professional for the best results and to avoid extra costs. This guide is meant to give you a detailed insight into the process and help you avoid possible errors.

• Preparation

✓ Ensure you have the required amount of tiles, adhesive and grout.

✓ Take the tiles measurement and calculate in square metres.

✓ Determine the number of tiles to be used and add about 10% to the total number to cover for possible wastage.

✓ Check to surface to make sure its clean and dry.

• Mark Out The Area To Be Tiled

✓ Mark out the width of the tiles with spacers using a baton of timber.

✓ Position a tile against the bottom-most point and draw a line.

✓ Put a baton along this line and follow this by a vertical line at the wall’s end.

• Install The Tiles On The Kitchen Walls

✓ Apply an even layer of adhesive with a wall trowel on the kitchen’s wall surface.

✓ Place the first tile on the adhesive and apply small pressure, do this for the remaining tiles with similar pressure to ensure its levelled.

✓ Make use of tile spacers to get a uniform space in between.

✓ Leave the adhesive to harden before applying the grout.

• Grouting

✓ Remove the tile space and clear out excess adhesive

✓ Prepare the grout

✓ Make use of a grout float to apply the mixture into the joints.

✓ Let the grout dry up a bit before washing the surface off with a sponge and water.

how to fit kitchen floor tiles?

Kitchen floor tiles are a very popular choice for several reasons. They’re durable, visually appealing, resistant to moisture and stain and also relatively easy to maintain and install especially when compare to wall tiles. This is a task that can be done by any competent DIYer but requires a lot of patience as well as confidence. If you lack these attributes, then we’d recommend that you hire a professional floor tiler who can guarantee the best results the first time. In this article we’ll take you through the kitchen floor tiling process. Let’s get started!

• Prepare The Subfloor

✓ Ensure the subfloor is very secure to support both the tile and the people working across it.

✓ If necessary, you can strengthen the kitchen floor with the help of a vinyl, heavy felt or any other good backer board.

✓ After successfully securing the floor, proceed to clear out all dust and dirt.

• Mix The Mortar

✓ Mix a thinset mortar be referring to the instructions on the package. ( Mix only the quantity you can apply within 30 minutes).

✓ Once the mixture looks similar to the thickness of mayonnaise, allow it to rest for about 10 minutes before application.

• Apply The Mortar

✓ Apply a thin layer of mortar

✓ Do not cover extensive areas as the mortar can become very dry.

✓ Spread the mortar with a trowel in curved patterns to make it flat on the floor.

• Set The Tile

✓ Set down the tile slowly, apply a little pressure until its holds firmly to the surface. ( Apply a consistent amount of pressure throughout to ensure equal heights for all the tiles)

✓ Continue with the process until all full tiles are well positioned

• Cut The Tiles

✓ Once all the full tile pieces are in place, start cutting to cover the edges requiring smaller tile pieces.

✓ Take accurate measurements of the outer edges needing smaller tile pieces.

✓ Cut the tile pieces to fit the measurement taken with the help of a wet saw or hand tile cutter.

• Grouting

✓ Remove all spacers and mortar residues and lay the grout

✓ Apply the grout along the tiles’ seams with a grout float

✓ Clean out excess grout with a damp sponge after leaving it to dry for about 30 minutes

✓ Once the grout is fully dried, apply the sealer (the drying process normally takes within 3 to 4 days).

how to grout floor tiles

Have you laid your tile and left it to set? If yes, then the next step is to start grouting. Before you get started there’s a need to make ready the right grout for the type of your grout as well as background material. If you’re not certain of the right grout you can reach out to the grout manufacturer for help. Grouting of floor tiles is not the easiest and tasks and should be left to a reputable professional in order to avoid costly mistakes and unnecessary costs. In this post, we’re going to take you through the processes involved in grouting of floor tiles in order to put you on the right track. Let’s take a look!

  1. Depending on the adhesive used to lay your tiles, make sure you leave enough time for the tiles to fully set.
  2. Get a mixing bucket and mix grout powder and water as instructed on the packaging. Ensure not to make too much as this will make it solidify quickly and unstable.
  3. Apply some grout on the tiles - hold the grout float at 45 degree angle and apply the grout to fill all of the joints.
  4. Once you’re done grouting all of the joints between the tiles, leave it for up to 10 to 15 minutes to dry before wiping down the tile surface using a damp sponge. Ensure not to apply too much pressure on the grout joints.
  5. Let the tiles rest for about an hour so as to allow the grout solidify and harden a bit more. Once done, proceed to take off the excess grout and smooth it off.
  6. Wipe down the tiles until they’re totally clean using a clean cloth.
How to tile a bathroom wall with large tiles?

How To Tile A Bathroom Wall With Large Tiles

It is crucial to make the walls of your bathroom waterproof, and a great way to do this is by installing tiles on them. And to make it more effective, less time consuming and a lot easier, you can make use of the large tiles in your shower. So how do you have them installed? With this brief guide, you’ll learn everything you need to know about the bathroom wall large tiles installation. Let’s have a look!

lGet The Appropriate Substrate

• Clean the surface on which the large tiles will be placed

• Make use of levelling spacers to ensure the large wall tiles are even.

• Get a cement-made backer board to install the tiles

• You made require a large format wall adhesive for the installation, if the large wall tiles are different

lSet The Layout

• You may need a dry layout for the tiles installation (installation without mortar or other bonding agents).

• Start with the first wall opposite the bathroom’s entrance

• Once completed, you can continue with the remaining parts of the bathroom wall.

• Place the first tile at the centre.

• Place the subsequent tiles on each side of the previous ones to have a more balanced installation.

There are three varying materials that can be utilized in installing heavy wall tiles. These includes thin set mortar, epoxy and mastic. However, you should always make use of epoxy for large format tile layout. To do this, simply place the tiles at your desired angle and gently twist them to hold firmly in place. Continue with this process till you have successfully covered the entire bathroom wall with the large tiles. Once done, leave the bathroom wall to dry.

It is advised that you hire the professional services of a tile installation company in order to get the best outcome especially if you lack the necessary experience, tools and knowledge to carry out the project. This will save you some time, effort and money.

how to tile a bathroom floor?

Are you looking to tile your bathroom floor very soon? Well, we’ve got you covered! Tiling is not the easiest skill to acquire and definitely not one you’d not want to try out on your bathroom with some practices. For the best results and to get it right the first time, we’d recommend you hire the services of a reliable professional especially if you’re inexperienced or without a bathroom tiling training. Hopefully, this quick step-by-step guide will put you in the right direction.

Bathroom Floor Tiling Procedures

• Make Sure You Have A Levelled Subfloor

✓ Your subfloor’s stability is crucial for the success of your tile laying.

✓ Once done, then you can start planning how to level the floor.

✓ Identify the highest point of your floor and place a really long level to determine the dip and hump spots.

✓ Fill in the identified low spots with mortar.

• Cut The Tiles

✓ Using a wet saw with a diamond blade and pump, cut through the tiles to get the appropriate shape.

• Choose The Appropriate Adhesive

✓ To best adhesive is probably the one written on the label and suggested by the manufacturer.

✓ If uncertain, you can make use of a modified mortar

• Prepare The Area

✓ Using the prepared mixture of your mortar, prime the surface by spreading it on the floor with the trowel’s flat side.

✓ Once done, you can add more mortar with the ridges of the trowel.

• Space The Tiles

✓ Tile spacement depends largely on the surrounding walls. Straight walls equal straight tiles, if not your judge would be required to ensure a great outcome.

✓ If the wall is straight, make a space of about an eighth of an inch. The bigger spacing, the higher the possibility for the grout to become visibly discoloured.

• Use The Right Grout

✓ With sanded and unsanded grouts having a variety of colours, choosing the ideal grout can a tricky affair.

✓ The size of the spaces play a huge role in determining the best choice.

✓ Use a sanded grout if the spacing is an eighth of an inch or more. However if less, make use of the unsanded grout.

Tiler help and advice

How it works

Tell us about your Tiler project

Answer a few quick questions to help us match you with the right Tiler

Get up to 4 free quotes

Receive no-obligation quotes from 4 Tilers working in Leven.

Pick the right pro for you

Compare prices, customer reviews and services, and hire the right Tiler.

Are you a Tiler in Leven?

View our open Tiler jobs near you

Join today
View Shortlist