Flooring | Tile | Fitting
Poole - BH17
Enquiry from: Zoe M
Start Date: Immediate
Suspended timer floor over concrete slap with chipboard top suitable to lay a dance vinyl on top. Room 10x13m
-->
Over 0 reviews & an average rating of 0/5 stars, you'll find the right pro
Use the shortlist button to select up to 4 tradespeople, enter your project details and press send
Get up to 4 quotes from local Tilers near you
Poole - BH17
Enquiry from: Zoe M
Start Date: Immediate
Suspended timer floor over concrete slap with chipboard top suitable to lay a dance vinyl on top. Room 10x13m
Poole - BH17
Enquiry from: DENISE J
Start Date: Immediate
Customer visited the mydecoratingprices.co.uk site and submitted an enquiry. Property type: Other, Work description: gloss 6 doors and all the skirting paint the bedroom and paper the bathroom,livin...
Poole - BH13
Enquiry from: Concept C
Start Date: Immediate
tiling on a large scale to include bathrooms walls/floors entrance/garage/gym floors approx 500m2
Poole - BH15
Enquiry from: Andrea L
Start Date: Immediate
Home owner Terrace Wall tiling for bathroom Time scale: Less than a month Please contact to appoint *
Poole - BH15
Enquiry from: Andrea L
Start Date: Immediate
Home owner Terrace Floor tiling for bathroom Time scale: Less than a month Please contact to appoint *
Poole - BH15
Enquiry from: Maureen S
Start Date: Immediate
Property type: Semi detached, Property owner: Owner, Number of rooms to be tiled: one, Work description: Karndean Art Select tiles to be fitted in hallway Call to appoint *
Bournemouth - BH8
Enquiry from: Gerald H
Start Date: Immediate
insulation of wooden joist floor on 1st floor flat to reduce sound impact from floor below. Approx size 4 meters by 4 meters Are you the property owner: Tenant (with permission) Property Type: Detache...
Wareham - BH20
Enquiry from: Robert F
Start Date: Immediate
Customer visited the mytilingprices.co.uk site and submitted an enquiry. Property type: Detached, Property owner: Owner, Number of rooms to be tiled: one, Work description: Replace 4 tiles from show...
Wareham - BH20
Enquiry from: Linda M
Start Date: 1 to 3 months
Customer visited the mydecoratingprices.co.uk site and submitted an enquiry. Property type: Detached, Work description: kitchen painted and small amount of wall tiling
Bournemouth - BH3
Enquiry from: Dave C
Start Date: Immediate
Re-grouting tile floor in bathroom Are you the property owner: Owner of the property Property Type: Detached How many rooms are you looking to have tiles fitted to: 1-2 Rooms Time scale: Less than on...
Bournemouth - BH3
Enquiry from: Liz W
Start Date: Immediate
floor and wall tiling of large porcelain tiles in small en suite wet room approx 20 sq metres please call my overseas number via WHATSAPP : 009745xxxx808 need to start right away. Thanks Are you...
Bournemouth - BH6
Enquiry from: Ashley S
Start Date: Immediate
Customer visited the mytilingprices.co.uk site and submitted an enquiry. Property type: Detached, Property owner: Owner, Number of rooms to be tiled: one, Work description: bathroom re fit - tiles t...
Bournemouth - BH6
Enquiry from: Ashley S
Start Date: Immediate
Customer visited the mytilingprices.co.uk site and submitted an enquiry. Property type: Detached, Property owner: Owner, Number of rooms to be tiled: one, Work description: bathroom re fit - tiles t...
Bournemouth - BH8
Enquiry from: Paul N
Start Date: Immediate
Customer visited the mytilingprices.co.uk site and submitted an enquiry. Property type: Detached, Property owner: Owner, Number of rooms to be tiled: two, Work description: Kitchen floor and hallway...
Swanage - BH19
Enquiry from: Scott G
Start Date: Immediate
Customer visited the mytilingprices.co.uk site and submitted an enquiry. Property type: Commercial, Property owner: Relative of owner, Number of rooms to be tiled: three plus, Work description: Tili...
Swanage - BH19
Enquiry from: Scott G
Start Date: Immediate
Customer visited the mytilingprices.co.uk site and submitted an enquiry. Property type: Commercial, Property owner: Relative of owner, Number of rooms to be tiled: three plus, Work description: Tili...
Wareham - BH20
Enquiry from: Catrin H
Start Date: Immediate
We have a small rectangular downstairs room. 3.5m x1.95m. It's currently empty as just finished painting and we were hoping someone could come ASAP and fit some Lino floor or carpet tiles. Something f...
Wareham - BH20
Enquiry from: Neil H
Start Date: Immediate
Property owner: Owner, Property type: Semi detached, Number of rooms to be tiled: two, please contact to appoint
Bournemouth - BH4
Enquiry from: Chris E
Start Date: Immediate
Property type: Other, Property owner: Owner, Number of rooms to be tiled: one, Work description: Kitchen Are you the property owner: Owner of the property Property Type: Other How many bedro...
Bournemouth - BH8
Enquiry from: John I
Start Date: Immediate
Commercial property owner new build tiling 6 x 6 open areas Fit only Time scale: Immediate 6+ walls to tile please call to appoint *
How much do Tilers in Poole charge?
Prices for Tilers around Poole can vary depending upon the type of service that you need to have actually carried out in your house. It's the question we get asked a whole lot "how much do Tilers in Poole cost?". It's definitely better to have an idea of how much a Tiler are going to likely charge for their work. Rates will most likely rise and fall based on the products as well as the tradesman chosen. The table reveals the sorts of work that Tilers usually do and also the standard price variety of these tasks. Some jobs take longer to finish than others so costs do differ by task.
Tasks that Tilers in Poole can do:
Tiler job | Tiler cost in 2024 |
---|---|
Floor tile fitting in Poole | £375-£575 |
Floor tiling in Poole | £1,125-£1,725 |
Wall tile fitting in Poole | £375-£575 |
Wall tiling in Poole | £525-£805 |
Kitchen Tiling in Poole | £525-£805 |
Kitchen fitters are often trained carpenters and not all will offer tiling but many will know a tiler that they have worked with in the past. If you are looking to get your kitchen retiled without fitting a new kitchen when it's worth talking to tilers directly to get a range of prices.
It's useful to know in advance what tiles you like, a visit to your local tile store and either pick up a brochure or take some photos. It's probably better not to purchase the tiles at this moment though as often your appointed tiler may be able to get you a better price for the tiles or recommend alternatives.
Are you interested in fitting tiles in your home or office? If yes, then you’d probably want to know the total cost of getting the project over the line. And being fully aware every job is unique, having a cost per square metre to work with will give you a more accurate price estimation for the overall project.
First and foremost, the cost of a tiler depends on a wide range of factors such as the type of floor tiles and the size of the area. The cheapest of them all is the vinyl tiles which can be easily cut through and waterproof when properly sealed. As a result, making them a better fit for bathroom floors. Other kinds of tiles include ceramic tiles, mosaic tiles, quarry tiles and porcelain tiles. Each of the types have their own unique qualities including the quarry tiles’ durability and the afore-mentioned vinyl tiles’ waterproof qualities.
Having in mind that the major part of your tiles cost largely depends on the size of the area and the type of tile selected, you can then go ahead to contact your preferred tiling professional for an installation quote. The average price of bathroom tiles installation ranges about £20 to £25 per square metre. Meanwhile for a kitchen floor tiling project, the cost should range between £20 to £50 per square metre.
Finding a tiling professional you can rely on to complete your project and deliver a top quality job while also offering a very competitive price can be almost impossible. The professional you use greatly determines the price of your tiling effort, so there’s the need to review various professionals before making a decision.
How To Remove Tile Adhesive From Wall
Do you feel your tile design choices are outdated and want to replace it with a more stylish one? Or perhaps you’re just struggling to remove the old tile adhesive from your wall. Putting on a new wallpaper or repainting your wall might be a cup of tea, but retiling is surely a different experience altogether. After detaching every single piece of tile from the wall, you’ll still have the strongly glued adhesive to battle with. If not done properly, you may as well damage the wall which will trigger a new additional cost for repair. We’d recommend you get a professional helping hand for the best results if you’re without a proper training or experience. However, this guide will teach you everything you need to know about the process. Let’s get started!
Materials Required
• Steamer
• Protective sheets
• 4-inch scraper
• Clean cloth
• Protective gear - face mask, eye goggles, gloves.
Tile Adhesive Removal Process
• Cover The Floor
Ensure that the floor is well covered to collect the residues falling off from the wall with some protective sheets.
• Heat Up The Adhesive
Using the wallpaper steamer, heat up the adhesive to make it a bit loose and softer. Do this by slowly moving the steamer around and ensure not to stay on one spot for too long.
• Scrape Off The Mortar
When you can tell the adhesive is properly softened, use the 4 inch scraper to wipe it off the wall. Do this until all the adhesive has been completely removed.
• Clear Out The Fallen Residue
Clean up any mortar that has fallen on the floor.
After the tile adhesive removal, your wall may need to be skimmed depending on its state. This is to put the surface in a good and flat condition before installing the new tiles. The wall may also need to be re-plastered if the adhesive is extremely strong.
Tiling a kitchen wall can seem like an easy task until you get started. Errors made will forever be evident for everyone to see unless you’re prepared to spend some extra bucks. When done right, it can actually be a very satisfying project, but don’t even think about rushing into it. If you lack a proper training or experience, it’s advisable to leave the task to a skilled professional for the best results and to avoid extra costs. This guide is meant to give you a detailed insight into the process and help you avoid possible errors.
• Preparation
✓ Ensure you have the required amount of tiles, adhesive and grout.
✓ Take the tiles measurement and calculate in square metres.
✓ Determine the number of tiles to be used and add about 10% to the total number to cover for possible wastage.
✓ Check to surface to make sure its clean and dry.
• Mark Out The Area To Be Tiled
✓ Mark out the width of the tiles with spacers using a baton of timber.
✓ Position a tile against the bottom-most point and draw a line.
✓ Put a baton along this line and follow this by a vertical line at the wall’s end.
• Install The Tiles On The Kitchen Walls
✓ Apply an even layer of adhesive with a wall trowel on the kitchen’s wall surface.
✓ Place the first tile on the adhesive and apply small pressure, do this for the remaining tiles with similar pressure to ensure its levelled.
✓ Make use of tile spacers to get a uniform space in between.
✓ Leave the adhesive to harden before applying the grout.
• Grouting
✓ Remove the tile space and clear out excess adhesive
✓ Prepare the grout
✓ Make use of a grout float to apply the mixture into the joints.
✓ Let the grout dry up a bit before washing the surface off with a sponge and water.
How To Lay Tiles On Concrete
Installation of tiles on concrete sub-floors can be done with relative ease under adequate guidance. Here is what you have to do.
lPrepare The Concrete Subfloor
• Ensure the concrete is dry, clean and must be at least 6 weeks old.
• If there are dips and humps, level the concrete using a levelling compound.
lSet Out
• Working from the centre outwards, take a measurement of the floor (both length and width) and draw a cross at the centre.
• Lay out the tiles from the cross with a space of 3mm between each tiles. This will allow for movement stresses within the floor and later to be filled with grout upon installation of the tiles and adhesive dried.
lCut The Tiles
• Due to the particularly had nature of some floor tiles such as natural stone and porceclain, high quality tools are usually required to produce a clean cut through the tiles. With the help of an electric wet cutter alongside a slide cutter and nippers, your job would be made a lot easier.
• For a better result during intricate cuts, make use of a cardboard template.
lFix The Tiles
• The tiles should be fixed using a cement-based adhesive.
• Ensure to refer to the packaging or product data for the mixing ratios information.
• Stir the mixture till its lump-free
lApply The Mixture
• Spread the mixture onto the concrete sub-floor to create parallel ribs with the help of a floor trowel.
• Push the tiles into the parallel ribs.
• Clear out any excess adhesive from the tiles surface with a damp sponge.
• Do not walk on the tiles for at least 2 hours.
lGrout
• Once the adhesive is dried, wipe out any dust, adhesive or dirt from the tiles’ gaps.
• Mix about 4 to 5 parts of grout powder with 1 part of water and ix together.
• Apply the mixed grout diagonally across the tiles using a soft rubber grout float.
• Wipe out excess grout from the tiles surface and allow the tiles to dry.
• Stubborn residues can be cleaned using any washing up detergent with warm water within 24 hours after grouting.
How To Take Tiles Off A Wall
The bonding agent or adhesive usually incorporated to hold a tile against the wall are always very strong or else you’ll find your tiles peeling off. As a result, to have them removed is not the easiest of tasks and bashing them with a hammer, will only have them broken leaving you with the task of having to scrape off the pieces. A better and much easier approach to removing tiles from a wall will be to pry them off one after the other. So how do you go about this? Let’s have a look!
lSafety First, Then Remove The First Tile
• Wear a protective eye goggle and gloves.
• Break up the grout around a tile located atthe wall’s centre using a putty knife and hammer.
• Place the putty knife under the the tile and gently it with the hammer.
lRemove The Remaining Tiles
• By tapping and prying using the tools - hammer and putty knife, wipe off all the tiles in the vertical row.
• Once done, continue to detaching the tiles in the adjacent rows until you’re able to open a wallboard section that’s around 12 inches wide and does not obstruct a stud.
• Use a keyhole blade to poke it through the wallboard.
• With the help of a reciprocating saw, cut out the wallboard’s section.
lCut The Fasteners
• Using a metal-cutting blade, cut te wallboard-holding fasteners. Make sure the fasteners holding the wallboard to the top and bottom plates of the wall are both detached.
lRemove All Wallboard Sections
• Using a similar approach, gently remove the other sections of the wallboard.
• Once completed, you can easily sweep the tiles’ broken pieces.
• Finally, vaccum the grout dust to ensure the work is neatly done.
If you lack a proper training or experience, taking off your tiles from a wall is best left to a skilled professional for the best results and to prevent potential damages which can lead to additional costs.
How To Tile A Bathroom Wall
Tiling your bathroom walls will not only increase the visual appeal of your space, but also provide an additional layer which helps protect against potential moisture damage, moist growth and also makes the bathroom a lot easier to clean up. So if you’re are looking to tile your bathroom, it’s recommended to get in touch with a skilled professional to ensure you get the best results. However, this guide will provide you with a good insight on how to get through the process smoothly and avoid costly errors. Let’s take a look!
lPrepare The Wall’s Surface
• Make sure that the surface is clean, smooth and dry.
• If there are any dips or holes, ensure to have them patched or sanded.
• Measure the area to be tiled and shape the backer board to fit, if a new wall surface is necessary.
• Cover the new surface area with adhesive to attach the back board to the surface.
lMix The Mortar
• Firstly determine the tile layout and make a layout tool
• Install the datum
• Follow the instructions of the adhesive package as the type you’re to use depends on the wall type.
• Create a consistent and smooth paste by mixing the adhesive with water.
lInstall The Tiles
• Using a notched trowel, spread the mortar.
• Put a thin layer at the back of each tile and press it against the surface.
• Create ridges using the notched side of the trowel.
• Clear out any excess adhesive on the tile’s surface as you continue.
• Put the spacers at the joints
• Remove the datum planks when ready to install the outer edge tiles.
lApply The Grout
• Put the grout over te tiles with a grout float
• Clean out excess grout with a damp sponge
• Seal the tiles once the grout is dried
Laying of floor tiles may seem seem to be a very tricky task that’s beyond the abilities of some homeowners, but in reality, it’s a task that most DIYers can handle - as long you don’t rush the process. With a little patience here and there, you’ll be amazed with how far you can go. The materials are quite easy to work with and tools, only requiring a little practice to master. However, if you don’t have the necessary confidence to pull this off, we’d strongly recommend that you call in a professional who can guarantee the best results for help. In this guide, we’ll walk you through the process of laying floor tiles.
• Floor Preparation
✓ The first step is to prepare the floor by moving all objects like mortar, adhesives and more.
✓ Use concrete patching compound to fill ill low spots and cracks, until the floor is levelled.
✓ Ensure the floor is dry and clean.
• Pattern Layout
✓ Take the measurement of each wall’s length while also taking into account the room’s diagonals.
✓ To help place the tiles in an orderly manner, make use of a chalk to mark down lines on the levelled surface in question and ensure it’s parallel to the walls.
• Adhesive Preparation
✓ Mix the appropriate amount of water with the adhesive (bonding agent).
✓ The mixture should be toothpaste-like thick to ensure the durability of the tiles.
• Tiles Placement
✓ Depending on the tile’s size, evenly spread the mortar on the floor using a notched trowel.
✓ Lay the first tile on the bonding agent (adhesive or mortar) and apply a gentle and little pressure on the tile.
✓ Repeat the technique for other tiles using plastic spacers to ensure the edges and corners are properly aligned.
• Tiles Cutting
✓ Cut the tiles (if necessary) with the help of a wet saw or scoring cutter featuring a diamond-tripped blade.
• Grout Application
✓ Filling of the tiles’ gap is done using the grout. It can be applied to the joints with a rubber float.
✓ After application, allow the grout to set up for some minutes.
✓ Use sponge and a bucket of water to clear out any adhesive leftover.
• Grout Sealing
✓ Use a foam brush or applicator bottle for the sealants’ application.
✓ Clean out excess sealer within 10 minutes.
Answer a few quick questions to help us match you with the right Tiler
Receive no-obligation quotes from 4 Tilers working in Poole.
Compare prices, customer reviews and services, and hire the right Tiler.
View our open Tiler jobs near you
Join today